Char-Broil Pièce de gril universelle pour tente chauffante Char-Broil

Name: Char-Broil Pièce de gril universelle pour tente chauffante Char-Broil
Brand: Char-Broil
SKU: 0047362972651
Price: 37.95 EUR
Availability: InStock

Brand:Char-Broil

3/5

€
37.95

Tente chauffante universelle conçue pour protéger les brûleurs du gril à gaz. Compatible avec une variété de marques et de modèles de gril qui ont un alignement des brûleurs d'avant en arrière ou un alignement des brûleurs d'un côté à l'autre. Contient une tente chauffante réglable en 3 pièces, qui couvre un brûleur de gril. La tente chauffante Char-Broil Universal Fit est conçue pour s'adapter à de nombreuses marques de grils à gaz et a prolongé la durée de vie de vos brûleurs de gril afin que votre gril dure toute la saison.

Aucune unité disponible

EAN: 0047362972651

Catégories Patio, Lawn & Garden, Grills et cuisson extérieure, Pièces de rechange pour la cuisson en plein air, Plaques chauffantes de grill,

Une tente chauffante qui couvre un brûleur de gril. Achetez 2 unités pour les grils à 2 brûleurs, achetez 3 unités pour les grils à 3 brûleurs, achetez 4 unités pour les grils à 4 brûleurs. Contient une tente chauffante, qui a une conception télescopique en 3 pièces. Protège les brûleurs et aide à répartir la chaleur uniformément dans le gril. La conception durable et télescopique en acier inoxydable s'ajustera de 12 pouces de longueur à 24 pouces de longueur. Tente chauffante universelle à utiliser avec les grils à gaz dotés de brûleurs à tube ou à barre.

Assembly Required	No
Brand	Char-Broil
Color	Stainless steel
Country of Origin	China
Customer Reviews	4.0 4.0 out of 5 stars 538 ratings 4.0 out of 5 stars
Frame Material	Stainless Steel
Fuel Type	Gas
Included Components	Universal Fit Heat Tent
Item Dimensions LxWxH	16.2 x 5.4 x 2 inches
Item model number	4797265R06
Item Weight	1.32 pounds
Manufacturer	Char-Broil
Material	Stainless Steel
Model Name	XL Stainless Steel
Product Dimensions	16.2 x 5.4 x 2 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: R.Shaw

Great Product

For a 24" wide grill, you will need to crimp the edges for it to hold. I will spot weld it to firm it up.

Scritto da: Gussuk

Requires some work to fit properly

My application is about 23 inches. At that length it sags a lot in the middle. The folded crimps on the outer pieces are loose but crimping them tight with pliers it was still too loose and the sag in the center remained. I held it up flat and marked it with a pen. I had some stainless steel pop rivets left from another project so i drilled it and pop riveted it in place. This fixed the sag. Make sure it isn't too tight as it grows when heated and will buckle in the middle if it doesn't have room to expand.

Scritto da: Kakstis 1

Was a little short, but i made it work!

It was a little short on my grill but I pinched the crimps that hold it together and bent it a little bit to get it to stay

Scritto da: SLE

Worked for me

Slide it together for the right length. I used my old (rusted out) one as a guide. I had just a little trouble getting it back in my Char-Broil grill but not much. It just sits in place. I'll get a few more years out of my grill now.

Scritto da: George Sudduth

Had to adjust to fit

The problem is that the slide of the metal pieces when opened to a maximum fit fall apart easily

Scritto da: Rich

Hard to find 24" heat tent for old Char-Broil grill

Works as expected. Have used this item in the past. I have an old Char-Broil grill with a 23.5" heat tent holder. This tent can reach 24" as advertised but it will sag in the middle and almost touch the bar burner. As suggested in other reviews, tried to crimp the sliding groves to keep it level but this does not work. Could have used a couple of sheet metal screws (way to much bother) but found that a clay brickette used for even heating placed in the middle of the burner will raise the heat tent upward to make a level surface and still allow even heating by the burner. At 24" it's the only game in town for us old grillers!

Scritto da: ChrisMarg

Worked perfectly.

We thought it was a risk to purchase this part at the inexpensive price. We now get more even flame.

Scritto da: Marg Coulter

Disappointed and aggravated.

Was not compatible with my bbq even though it said it was. The grill kept knocking it off. The one I ordered said 12-28 inches but the box said 12-24” max. I needed 23 1/2” and it definitely did not fit - just kept falling apart. I will have to have one custom made I guess which will be costly. Would love feedback.

Scritto da: Mr Kieran Hayde

Not a great fit for the Char Broil 463720114

Can't comment on how it fits other models, but it's not right for the Char Broil 463720114 which is quite wide. It will just about fit, teetering on the edge, but it usually drops off during cooking or collapses in the middle. I can imagine it working better if it's not overstretched as it is for this model.

Scritto da: Marie Rutledge

Only one received not 4

In the write up it said 4 flavour bars and only one came. The write up was under the product. Where's the rest of them????

Scritto da: Amazon Customer

That you can't go wrong with it...

Like it can a just to the BBQ ...