CLÉ À ENGRENAGES 114 pièces. Jeu de tarauds et filières à cliquet SAE/métrique - 82812 Jeu de 114 pièces

Name: CLÉ À ENGRENAGES 114 pièces. Jeu de tarauds et filières à cliquet SAE/métrique - 82812 Jeu de 114 pièces
Brand: GEARWRENCH
SKU: 787721817901
Price: 430.51 EUR
Availability: InStock

Brand:GEARWRENCH

3.8/5

€
430.51

Description du produit Cet ensemble complet de tarauds et filières SAE Standard et Metric GEARWRENCH est parfait pour le maître mécanicien ou l'atelier d'usinage qui a une grande variété de besoins de filetage. 48 tarauds et 48 matrices vous offrent toutes les tailles nécessaires, et nos outils sont conçus dès le départ pour apporter les innovations GEARWRENCH à nos utilisateurs qui travaillent dur, comme la tête à 5 cliquets de nos poignées en T ou le système de guidage breveté Twist Lock qui sécurise tout extension ou outil de coupe à la poignée, produisant des fils droits à chaque coupe. AMAZON.COM Ensemble complet de système de poignée en T à cliquet d'outils de taraudage et de filière (voir plus grand). réduit le recul du guide de matrice et maintient les matrices centrées lors de la coupe des filets. La clé à cliquet en T fournit un arc de cliquet de 5 degrés, et son levier réversible permet des changements rapides d'avant en arrière pour éliminer les rotations manuelles. CONTENU DE LA BOÎTE82800 grande clé à cliquet en T, 82801 grand adaptateur de taraud de verrouillage, 82802 grand adaptateur de matrice hexagonale, 3881 clé à cliquet moyenne en T, 3883, adaptateur de taraud moyen, 3882 petit adaptateur de taraud, 3884 adaptateur de matrice moyenne, 82803 adaptateur d'extension mâle, 82804 femelle adaptateur d'extension, T coulissant pour adaptateurs, clé hexagonale de 4 mm, 5 extracteurs de vis, jauge de filetage métrique, jauge de filetage SAE, 48 tarauds et 48 matricesÀ PROPOS DE GEARWRENCHDepuis le lancement de la clé à cliquet brevetée originale de 50, GearWrench a continuellement mené des percées dans les cliquets traversants, douilles, tournevis/écrous, pinces et outils spécialisés. Peu importe l'industrie dans laquelle vous vous trouvez, GearWrench a les outils pour répondre à vos besoins, du plus précis au plus indestructible. Les outils à main GearWrench sont garantis à vie contre les défauts de matériaux et de fabrication. 82812 114 GRANDES PIÈCES COMBINÉES TARAUDS ET MATRICES EN UN COUP D'ŒIL * Le système breveté de guide de verrouillage par torsion réduit le recul du guide de matrice * La fonction de verrouillage automatique permet un retrait sûr de l'adaptateur de taraud * Le levier réversible élimine les rotations manuelles * Construction en acier au carbone * Garantie à vie DU FABRICANT Clé à engrenages 114 pièces grand robinet à cliquet et ensemble de régime SAE/métrique, composé de : 82800 grande clé à cliquet en T, 82801 grand adaptateur de robinet de verrouillage, 82802 grand adaptateur de matrice hexagonale, 3881 clé à cliquet moyenne en T, 3883, adaptateur de taraud moyen, 3882 petit adaptateur de taraud, 3884 adaptateur de matrice moyenne, 82803 adaptateur d'extension mâle, 82804 adaptateur d'extension femelle, T coulissant pour adaptateurs, clé hexagonale de 4 mm, 5 extracteurs de vis, métrique jauge de filetage, jauge de filetage SAE, 48 tarauds et 48 filières. Ensemble complet de 48 tarauds et 48 matrices, plus un système de petites, moyennes et grandes poignées en T à cliquet, des adaptateurs de tarauds verrouillables et des adaptateurs de matrices hexagonales. Les tarauds et les filières sont fabriqués à partir d'acier à outils au carbone de haute qualité. Clés à engrenages à cliquet - Les systèmes de poignées sont parfaits pour le maître mécanicien ou l'atelier d'usinage. L'ensemble est livré avec un étui moulé par soufflage pour un stockage sûr et organisé. Voir plus

Aucune unité disponible

EAN: 787721817901

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Outils à main, Tarauds et matrices, Ensembles de tarauds et matrices,

Les adaptateurs d'extension d'entraînement offrent un meilleur accès dans les zones confinées lorsqu'ils sont utilisés avec des extensions d'entraînement de 3/8 pouces. La fonction de verrouillage automatique permet de retirer les adaptateurs de robinet en toute sécurité Mallette de transport pour moule de soufflage avec supports de robinet inclinés pour un accès et un stockage faciles L'ensemble comprend 2 poignées en T à cliquet, 3 tailles d'adaptateurs de robinet et 2 tailles d'adaptateur de matrice, 2 adaptateurs d'extension et un T coulissant pour les adaptateurs, une clé hexagonale de 4 mm, 5 extracteurs de vis, des jauges de filetage SAE et métrique, et 48 tarauds et filières en tailles SAE et métriques allant de 4 40 à 3/4" et de 3 mm à 18 mm. Les adaptateurs de matrice fonctionnent avec le système de clé à cliquet et de douille 3/8 pouces ainsi que les accessoires de douille. La clé à cliquet fonctionne avec le système de douille GEARWRENCH. Le système de guidage à verrouillage par torsion réduit le "retour en arrière" du guide de matrice et maintient les matrices centrées pendant la coupe. Le cliquet en T gère les matrices à vent avec un arc de rotation de 5° et dispose d'un levier d'inversion pour éliminer le retournement manuel.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎As Shown in the Picture
Country of Origin	‎Mexico
Customer Reviews	4.7 4.7 out of 5 stars 3,959 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Full Polish Chrome; taps & die are untreated
Included Components	‎
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎82812
Item Package Quantity	‎1
Item Weight	‎1.3 pounds
Manufacturer	‎GearWrench
Material	‎Steel
Measurement System	‎SAE & Metric
Part Number	‎82812
Power Source	‎Hand Powered
Product Dimensions	‎21 x 13 x 3 inches
Shape	‎Rectangular
Size	‎114 PC
Style	‎Set
Usage	‎Professional
Warranty Description	‎No Warranty - Consumable

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: OZ4

Works Great

Works as advertised!

Scritto da: nick radakovich

Value

Where I work taps are important an the quality is a must

Scritto da: Kenn

6 years and counting

Had these for six years and use them all the time as I restore a classic beetle to chase threads and other small projects. It’s a great set. The ratcheting handles are great, it’s all of great quality. Love this set.

Scritto da: Whilly whips

Worked great

Worked great as expected!

Scritto da: Tex

A great set with a lot to offer for this home-user.

I had read the reviews here before purchasing and especially took note of the people that reported some gouges in some of the machined taps with this set. I ordered anyway for a couple of reasons. First, this is no small company. It is part of Apex Tools that owns Lufkin Tapes, Crescent Tools, Wiss cutting tools, Nicholson Files and more etc that go back over 100 years. I have all of those tool Brands at home and they have served me exceptionally well for 30-40 years. So, I figured I'd give this set a go and if it was totally unacceptable, I could always return it (thanks to Amazon's service). Bottom-line, its not going back... I'm a home/hobbyist user of Tap and Dies, but I can understand why a Professional who uses these tools in a daily business setting can feel differently about what they need. But for my use at home, this is a great set, and for what you get, a very good price. I could not touch an equally configured Irwin/Hansen set for this price point. I have also used this set and it does a very acceptable job for my needs. Regarding the reports of the small gouges in some of the larger Taps, yes I have those too. But it is only on a couple of the Taps, the gouges are small, and the gouges are not on the cutting edges of the Taps. The cutting edges are clean, in tact and sharp. The very few gouges are on the threaded following surfaces, so that problem (for me) will not affect the tool's ability to cut proper threads. I did find that I needed to clean out a few loosely attached burrs from a couple of the Taps when they were machined. A small brass brush or even the "thread gauges" that come with this set easily dispatched those burrs. I have already used some of the Taps and they cut very well. The accessories that come with this set are quite remarkable and they work well too. I especially like the Tap Adapters that come with this set and they way they lock into the T-wrenches. My only complaint about the T-wrenches is that I can't lock the ratchet into place. You either go forward or backward via the selector flip/switch. If you have done much tapping of harder metals, you know that going forward and back quite often is needed to dislodge the burrs that you cut. I can accomplish it with the flip-lever, it would just be easier (at times) if the T-wrench didn't ratchet. But for cutting soft metal, I love that ratchet and the ability to move the handle without changing my grip is very appreciated. Overall, I think this set is a winner. I understand that it is not an Irwin/Hansen or even higher quality set. But for my use, that is OK and I expect to get many years of use from this set. I already have a much smaller, very cheap quality Tap and Die set that I've owned for 30+ years. Take care of your tools, use some finesse vs brute force, use cutting fluid, etc. and you can get many years even from a lesser quality Tap and Die set. :^) One update (4/23/16): I also purchased the Gator Tools V-Tap Guides that help keep the tap vertical (especially when starting the threads). The Gator Tools Tap Guide is a well made/machined part that earns a full 5-stars all by itself. Unfortunately, for this particular Tap set from GearWrench, on their smaller Taps (the Metric M5 and smaller) and (the Standard #10 and smaller), these Taps will not pass through the Big Gator Tools Tap Guide. That is because GearWrench makes the barrel (above the cutting portion of the Tap) slightly larger. Because of that design on their smaller Taps, it prevents the Tap from passing through the Big Gator Tape Guide. I've looked at these sizes in the Irwin Taps and it appears that Irwin maintains the barrel diameter so that it is not larger than the cutting portion diameter of the Tap. If something like this is important to you, then it may be worth considering Irwin vs GearWrench. I'm still happy with my GearWrench set and have some older Taps that will pass through the Big Gator tool just fine. Just thought I'd mention it as a difference for those considering this GearWrench set.

Scritto da: 338 Lapua Shooter

Good kit and good value

I purchased this kit about 5 years ago because I didn’t want to bring my snap on tap and die set to my shop where they would surely get lost or stolen by my staff. I didn’t have exceedingly high expectations of the kit but to be honest it’s just as good. As with any set you need to use a light cutting oil and as such I always use a thin oil. Over the years I have broken many bits and pieces of these types of kits, even my snap on ones and they always replace them…. But I have yet to break one of these. When I got my snap on brand products I was in the aftermarket automotive industry so I used them on a more routine basis, but now shifting careers to firearms I use different thread patterns and mostly the smaller ones which are far more prone to break, but these never have broken. To be entirely honest I paid almost half the price that they currently are selling for right now and since they’ve worked so well for me I’d have zero hesitation to buy a new set should I need them. The “big truck” brands I don’t think are any better and surely not worth the inflated cost which is likely 3-5 times as much as this kit. You’ll be happy with the kit.

Scritto da: Dexter See

Very good

Very good

Scritto da: Dustie Rose

High quality at a cheap price

For $210 I am extatic. This 114pc set performs just as good as my Snap-On set that has only HALF of the contents as this 114pc set and is twice the price. The ratcheting tap handles are elite, definitely a game changer when it comes to tight spots. Overall, I am very impressed with how these tap and die perform on both mild, stainless, and even aluminum. I would highly recommend this set to anyone.

Scritto da: ali

Very good

Great quality, love the ratchet

Scritto da: Laurence

Would love a refund or replacement

There seems a lot of play in the ratchet mechanism, and the ratchet direction lever has little resistance so when your removing the tap quickly the ratchet leaver keeps changing direction on its own account, this is extremely annoying,

Scritto da: Aivaras Ceida

Useless thing

Complete peace off ... Second time i used it and the centre ratchet mechanism fell out and i lost pressure spring

Scritto da: Mixx Cheang

Amazing!!

Very sharp and precise, bought a set of lang and did not fix a cross tread bolt almost snap the tool. Return it and bought gw tap and die set and work perfectly. Very happy with that tool safe a lot of time with the right tools.

Scritto da: MECANO

MECANO

bonjour l'outil est bien fait pour les endroit étroit merci.