0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

ClosetMaid 21775 Supports de support 30,5 cm pour étagères en fil, blanc, lot de 12

Brand:ClosetMaid

3.6/5

€
79.52

Ce support pour étagère en fil métallique est conçu pour être compatible avec une étagère en fil métallique de 12 pouces de profondeur et mesure environ 17,5 de profondeur. Préchargé avec un entraînement à 8 broches et des ancres. Support de 12 pouces pour maintenir les étagères en fil métallique. Recommandé d'utiliser tous les deux pieds.

Montant
Ajouter au panierAcheter maintenant

EAN: 6642526707250

Catégories Outils et amélioration de la maison, Quincaillerie, Supports d'étagères, Attaches,

Matériau : Acier revêtu d'époxy. Utilisez 1 support tous les 36 pouces et à chaque extrémité de l'étagère. Prend en charge la lèvre avant des étagères. Mesure environ 17,5 de profondeur ; À utiliser uniquement avec les étagères ClosetMaid de 12 pouces de profondeur. Comprend (12) supports, (12) ancres et (12) goupilles #8.
Batteries Included? ‎No
Batteries Required? ‎No
Brand ClosetMaid
Color White
Color ‎White
Customer Reviews 4.6 4.6 out of 5 stars 1,271 ratings 4.6 out of 5 stars
Included Components ‎12 Support Brackets, 12 Anchors, 12 Drive Pins
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 17.2 x 12 x 17.5 inches
Item model number ‎21775
Item Package Quantity ‎1
Item Weight 0.02 Pounds
Item Weight ‎0.32 ounces
Manufacturer ‎ClosetMaid
Material Epoxy Coated Steel
Material ‎Epoxy Coated Steel
Mounting Type ‎Wall Mount
Number Of Pieces ‎1
Part Number ‎21775
Product Dimensions ‎17.2 x 12 x 17.5 inches
Shape ‎Rectangular
Size ‎12 Inch
Style ‎12-Pack
Warranty Description ‎Manufacturer will replace any missing or damaged part due to manufacturer defect for one year after purchase. Please have proof of purchase for warranty claims. Combining ClosetMaid® branded products with third party components or products will void the ClosetMaid manufacturer’s warranty.

3.6

13 Review
5 Star
75
4 Star
15
3 Star
6
2 Star
1
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Christine Walker
Great Value and Support for Closet!
Love 'em! Added support to my closets in my rental house and worked fabulously with tons of clothes! Will include these in my new home with the wired closet racks.
Scritto da: Alfred Endozo
Good buy, but needed modification
I saw a few reviews that mentioned that others had to modify the notch to make these work for their wire shelves. I had to do the same. Luckily, I got the hang of using my Dremel tool and metal discs fairly quickly. My only suggestions to others would be to do all the grinding in an area you can easily clean or do it outside, but not on a windy day. I did my modifications in the pantry and all the metal dust went EVERYWHERE. Most of my cleanup involved a magnet covered with a plastic sandwich bag. Reverse the bag and you’ve got all the metal shavings in one place.
Scritto da: Bill Hall
Fits brackets
Easy to install
Scritto da: Tjs
Slightly longer than the old version
As the title they are a little longer than the much older ones that are being replaced. These are all metal. The old ones attached with a plastic connector which after 20 years have started to get brittle and break
Scritto da: Sean
Strong bracket. Improved design, I believe.
BLUF: Great bracket but I took a star off because the screws aren't exactly what I wanted. Read below for more details. I purchased these because when we hung our clothes up in a newly purchased house, the existing brackets all collapsed in the middle of the night and all the clothes fell. The old brackets (ClosetMaid 12" brackets) were bent where the flange met the wall, and I replaced the brackets with this product. A notable difference in the bracket design is a couple beads are pressed into these new brackets (located where the brackets are screwed into the wall) whereas the old brackets did not have them in there; the old bracket flange was flat. I imagine that this was done after some market feedback, because this is where our old brackets bent prior to failing. The new design with the beads rolled into the flange would provide additional support, or increase the maximum bending moment (wink to all the engineers our there), to the flange where the bracket is screwed into the wall. After completing the bracket replacement, the closet rack is much firmer and pulling down on the shelf, even when fully loaded with clothes, is much firmer compared to the previous setup. I opted to use different screws purchased from a home improvement store because I located all the brackets into the wall studs. I wanted a longer wood screw with a pan head that would bite into the stud a bit deeper.
Scritto da: NorCal_7777
Collapsed under little weight. Make sure shelving doesn’t slip onto brackets.
This collapsed and bent after I started hanging shirts. I didn’t even have anything on top of the shelves. Edit: Did not have wall clips installed so suspect the shelving slipped onto support brackets. They are not designed to handle much weight on their own. Will try again with the clips.
Scritto da: Dreed
Shelf brackets
These things are worth the money.
Scritto da: Brandy m
They’re what they say they are
Buy them if you need them, they do exactly as they say they do. They’re brackets for wire shelving. The hold the shelves up. That’s it.
Scritto da: PG
Do the job
Works good. Needs bent to fit right
Scritto da: jessica
Sturdy
Perfect for holding up shelves
Scritto da: Morvi
Did exactly what it was supposed to do
I used them to support closetmaid shelving. Just keep in mind that the 12 inch is the length of the shelves and not the bracket itself!!!
Scritto da: Bob
Exactly as advertised
These brackets work exactly as advertised.
Scritto da: Kicker8
Just what the closet doctor ordered!
Just right.

Produits connexes

hot
POWERTEC 71670 Kerf Mount Corner Brackets - 12PK Corner Bracket, 12 PK
3.6/5

€ 41.18

POWERTEC 71670 Kerf Mount Corner Brackets - 12PK Corner Bracket, 12 PK
3.6/5

€ 41.18

hot
Knape & Vogt RP-0045-PM Support mural pour étagère et tringle, peut contenir jusqu'à 500 livres, 12 pouces x 10 pouces, platine
3.2/5

€ 28.38

Knape & Vogt RP-0045-PM Support mural pour étagère et tringle, peut contenir jusqu'à 500 livres, 12 pouces x 10 pouces, platine
3.2/5

€ 28.38

hot
Hardware Essentials 852871 Supports de main courante utilitaire Laiton antique
3.2/5

€ 24.59

Hardware Essentials 852871 Supports de main courante utilitaire Laiton antique
3.2/5

€ 24.59

hot
Prime-Line MP7048-2 Support d'étagère Blanc 2 pièces
2.6/5

€ 40.39

Prime-Line MP7048-2 Support d'étagère Blanc 2 pièces
2.6/5

€ 40.39

hot
National Hardware N301-630 111BC Support d'étagère super résistant en blanc, 12 pouces 12 pouces National Hardware Packaging
3.4/5

€ 37.06

National Hardware N301-630 111BC Support d'étagère super résistant en blanc, 12 pouces 12 pouces National Hardware Packaging
3.4/5

€ 37.06

hot
Closet Pro RP-0044-BWT Light Duty 11 po. Support d'étagère et de tringle, finition en poudre blanche
3.5/5

€ 33.00

Closet Pro RP-0044-BWT Light Duty 11 po. Support d'étagère et de tringle, finition en poudre blanche
3.5/5

€ 33.00

hot
Matériel de support ClosetMaid pour étagère en bois stratifié, compatible avec les normes ShelfTrack, 3862, finition blanche, 10 pouces
3.4/5

€ 37.24

Matériel de support ClosetMaid pour étagère en bois stratifié, compatible avec les normes ShelfTrack, 3862, finition blanche, 10 pouces
3.4/5

€ 37.24

hot
Support d'étagère décoratif Lewiston en étagère, noir, 12 pouces
2.4/5

€ 39.58

Support d'étagère décoratif Lewiston en étagère, noir, 12 pouces
2.4/5

€ 39.58

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu