Culligan - US-EZ-1 US 1 EZ-Change Système de filtration d'eau potable sous évier avec robinet et filtre dédiés, 3 000 gallons, Chrome EZ-1 (bonne filtration) Système sous évier + filtre

Brand:Culligan

3.7/5

95.72

DESCRIPTION DU PRODUIT Description du produit Le système de base EZ Change fournit de l'eau claire, propre et savoureuse pour boire et cuisiner à un robinet dédié. La cartouche de filtration de base RC-EZ-1 incluse peut filtrer 3 000 gallons et durer jusqu'à 12 mois. Évitez le désordre lié au changement des cartouches traditionnelles et éliminez le besoin de seaux, de serviettes, de clés et d'autres outils. La tuyauterie et le matériel d'installation sont inclus. Amazon.com Le système de filtration d'eau potable Culligan EZ-Change sous l'évier garantit que votre famille disposera d'une alimentation en eau propre et fraîche à partir de votre robinet d'eau. Doté d'un mécanisme pratique de vissage et de dévissage pour une installation et un changement faciles, ce filtre protège contre les mauvais goûts, les odeurs et les particules nocives qui peuvent pénétrer dans l'eau. Le filtre sous évier EZ-Change a une capacité de 3 000 gallons et est certifié NSF pour la sécurité de l'eau potable. Système de filtration d'eau potable sous l'évier EZ-Change En un coup d'œil : Élimine les mauvais goûts et les odeurs de l'eau Dispose d'un mécanisme de torsion pour un changement de filtre facile Purifie jusqu'à 3 000 gallons d'eau Double arrêt de l'eau Garantie limitée de deux ans Ce Le système de filtration d'eau purifie jusqu'à 3 000 gallons d'eau tout en éliminant le mauvais goût et les mauvaises odeurs. Voir plus grand. Réduit les mauvais goûts et les odeurs Les filtres EZ-Change offrent un remplacement sans dégâts Le filtre EZ-Change s'adapte facilement au système d'eau de n'importe quel évier pour garder l'eau fraîche à portée de main de votre famille. Conçu pour plus de commodité, ce filtre léger peut être installé et remplacé en quelques minutes grâce au mécanisme simple à visser et à dévisser. De plus, des raccords rapides pratiques garantissent que le filtre reste en place jusqu'à ce qu'il doive être changé, de sorte que vous n'avez pas à vous soucier des fuites ou des déversements cachés. Certifié sûr et durable par le NFC, le filtre sous évier EZ-Change fournit à votre famille un approvisionnement en eau potable sûr. Le filtre purifiera jusqu'à 3 000 gallons avant de devoir être changé. Le système de filtration d'eau potable sous évier EZ-Change est couvert par une garantie limitée de deux ans du fabricant. Filtration Culligan : Fournir aux familles une eau propre et saine Chef de file reconnu dans les produits et solutions de filtration et d'adoucissement de l'eau, Culligan propose des solutions de filtration et de traitement disponibles pour toutes les parties de la maison. Les systèmes de filtration d'eau potable et d'eau de travail de Culligan aident à résoudre les problèmes d'eau difficiles pour vous donner une eau propre et claire pour toute votre maison. Contenu de la boîte Tête de filtre avec support intégré ; Cartouche filtrante de rechange RC-EZ-1 niveau 1 ; Vis de montage; adaptateur d'alimentation ; robinet sans plomb; tube en plastique 1/4" ; autocollant de rappel de changement de filtre ; et consignes. Voir toute la description du produit AMAZON.COM Le système de filtration d'eau potable sous évier Culligan EZ-Change garantit que votre famille disposera d'une alimentation en eau propre et fraîche à partir de votre robinet d'eau. Doté d'un mécanisme pratique de vissage et de dévissage pour une installation et un changement faciles, ce filtre protège contre les mauvais goûts, les odeurs et les particules nocives qui peuvent pénétrer dans l'eau. Le filtre sous évier EZ-Change dispose d'une capacité de 3 000 gallons et est certifié NSF pour la sécurité de l'eau potable. Réduit les mauvais goûts et les odeurs. Le système de filtration d'eau potable sous évier Culligan EZ-Change aide à garder votre famille en bonne santé et hydratée en fournissant l'eau par votre robinet. Capable d'être connecté discrètement sous votre évier, ce filtre élimine les odeurs et les goûts désagréables, l'odeur et le goût de chlore et les particules de classe III qui peuvent pénétrer dans l'eau. Votre eau aura non seulement bon goût, mais elle conservera également son odeur pure et fraîche. Les filtres EZ-Change offrent un remplacement sans désordre. Le filtre EZ-Change s'adapte facilement au système d'eau de n'importe quel évier pour garder l'eau fraîche à portée de main de votre famille. Conçu pour plus de commodité, ce filtre léger peut être installé et remplacé en quelques minutes grâce au mécanisme simple à visser et à dévisser. De plus, des raccords rapides pratiques garantissent que le filtre reste en place jusqu'à ce qu'il doive être changé, de sorte que vous n'avez pas à vous soucier des fuites ou des déversements cachés. Sûr et durable Certifié par le NFC, le filtre sous évier EZ-Change fournit à votre famille un approvisionnement en eau potable sûr. Le filtre purifiera jusqu'à 3 000 gallons avant de devoir être changé. Le système de filtration d'eau potable sous évier EZ-Change est couvert par une garantie limitée de deux ans du fabricant. Filtration Culligan : fournit aux familles une eau propre et saine. produits et solutions de filtration et d'adoucissement, Culligan propose des solutions de filtration et de traitement disponibles pour toutes les parties de la maison. Les systèmes de filtration d'eau potable et d'eau de travail de Culligan aident à résoudre les problèmes d'eau difficiles pour vous donner une eau propre et claire pour toute votre maison. Contenu de la tête BoxFilter avec support intégré ; Cartouche filtrante de remplacement RC-EZ-1 niveau 1 ; Vis de montage; adaptateur d'alimentation ; robinet sans plomb; tube en plastique 1/4" ; autocollant de rappel de changement de filtre ; et consignes. DU FABRICANT Le système d'eau potable sous évier Culligan US-EZ-1 remplace l'ancien SY-750 qui a été abandonné. Le Culligan US-EZ-1 fait partie de la nouvelle série Culligan EZ Change qui présente tous une apparence et une capacité améliorées. Il est doté d'un mécanisme de mise en marche et d'arrêt et d'un double arrêt. Le filtre réduit : le mauvais goût et l'odeur, le goût et l'odeur de chlore. Il a une capacité de 3000 gallons et comprend un autocollant de rappel de changement de filtre, une tête de filtre avec support intégré, une cartouche de filtre RC-EZ-1 niveau 1, des vis de montage, un adaptateur d'alimentation, un robinet sans plomb et un tube en plastique de 1/4 de pouce. Le filtre est certifié NSF et a une garantie de 5 ans. Voir plus

CERTIFICATION : Filtre testé et certifié par l'IAPMO selon la norme NSF/ANSI 42 pour la réduction esthétique du goût et de l'odeur de chlore et de la classe nominale de particules III. DURÉE DE VIE DU FILTRE : Jusqu'à 12 mois ou 3 000 gallons, selon l'utilisation et les conditions de l'eau. Compatibilité : cartouches de rechange Culligan RC-EZ-1, RC-EZ-3 et RC-EZ-4. Caractéristiques : le filtre réduit les particules de classe III, le chlorure et élimine le mauvais goût et l'odeur de l'eau ; raccords à connexion rapide avec fonction twist-on/off ; Comprend le remplacement de la cartouche filtrante, les tubes, le robinet dédié et le matériel d'installation. Fournissez à votre famille une eau visiblement propre et savoureuse pour boire, cuisiner et plus encore.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Culligan
Brand ‎Culligan
Capacity 3000 Gallons
Capacity ‎3000 Gallons
Color Chrome
Color ‎Chrome
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 9,208 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components 1 Filter System
Included Components ‎1 Filter System
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎US-EZ-1
Item Package Quantity ‎1
Item Weight 2.2 Pounds
Item Weight ‎2.2 Pounds
Manufacturer ‎Culligan
Material Carbon
Material ‎Carbon
Model Name EZ-Change
Model Name ‎EZ-Change
Number Of Pieces ‎1
Package Information Cartridge,Cartridges
Package Information ‎Cartridge,Cartridges
Part Number ‎01019052
Product Dimensions 13"L x 9"W x 4"H
Product Dimensions ‎13 x 9 x 4 inches
Product Dimensions ‎13"L x 9"W x 4"H
Size ‎EZ-1
Style ‎Under-Sink System + Filter
Warranty Description ‎2 year limited warranty
Water Consumption ‎3000 Gallons

3.7

13 Review
5 Star
78
4 Star
14
3 Star
4
2 Star
1
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Bobmon
Excellent filter for a decent price
I had one of those filters that you put on the end of your faucet for a number of years. It worked pretty well until I finally noticed that water had started leaking out from the base of the faucet neck. Apparently after all this time the back pressure caused by that filter and the weight of it levering down on the neck was causing the internal gaskets to fail. I removed the filter and the leaks stopped. But, this left me without filtered water. I wanted filtered water still but without the hassle of a pitcher in the fridge or having to replace my entire faucet due to the back pressure and levering caused by the on the neck one. Looking on Amazon I found a number of filters of varying prices and ultimately I decided to take a chance on this Culligan unit because the price was decent, the name is well known to me, and it had pretty good reviews. So far in the month or so that I've had it installed I'm quite satisfied with it. The water comes out at a very decent pressure, far better than my old on the faucet based filter. The kit comes with a plastic bracket that fits to the wall, some plastic tubing, a little adapter to put in-line with your cold water feed, some screws, the filter cartridge and the faucet. The faucet is not a super high quality item. It's mostly plastic, but it feels pretty solid for my needs. It actually comes in several pieces that you put together during the installation. I started my installation by drilling a hole in the sink. Make sure you have a sharp drill bit of the right size. The size they ask for is 5/8" which is one size larger than you'll find in most off the shelf drill bit sets. I thankfully had a 3/4" bit laying around from a different project, but my bit was fairly dull after that previous project so drilling was a bit of a challenge for me. I compared my 1/2" bits to the threaded stem on the base of the faucet and decided it just was not worth the risk of making too small a hole. The threads on the stem are all plastic and could be easily damaged by jamming the works into a hole that wasn't big enough. So do yourself a favor and get the right size drill bit before you start. After I had the hole drilled I unscrewed the wing nut from the base of the faucet and removed the metal plate. This left a plastic gasket on the base of the faucet that came off and I had to put back in place. After looking at the pictures I finally realized that the handle is supposed to go on the side of the faucet so I set the faucet in the hole and then reached under the sink to put the metal plate on and thread on the nut. Be careful not to over-tighten this as you could easily strip those plastic threads. Once it was snugly on the base felt pretty solid. I then took the neck of the faucet and attached it to the base and it looked pretty sharp, with no sign of the mangled hole I had drilled to put this in place. Next I shut off the cold water and proceeded to disconnect the feed line from the cold water connection on my faucet. I applied a little nylon plumbers tape to the connection and screwed on the plastic connector that came with the kit. A little more plumbers tape on the bottom and I reconnected the cold water feed line. After that I took the plastic bracket and using a sharpie clearly market the in and out sides so I wouldn't get confused later and hung it on the back wall with the included screws. Once all the major pieces were in place I took the plastic hose line, this is the same diameter as the kit that feeds my ice maker on my fridge, and carefully measured and cut two sections. On the base of the faucet you'll have a little plug that goes into the tube and a collar that goes over the hose. This threads onto the base of the faucet and once snugged down creates a good connection. The other end you simply wet and insert into a friction lock on the plastic bracket. The other line is even easier as it uses the same friction locks on both the hose line adapter and the plastic bracket. Finally I took out ye olde sharpie and wrote the date on the filter to remind me when I had installed it and connected it to the bracket by twisting it into place. Once it was snugly connected on went the water and after a quick check for leaks I turned on the faucet and a jet of water came streaming out. The instructions say you have to let it run for about ten minutes or so to let it flush out material from the filter. After the directed time I filled up a cup of water and tasted the sweet tasteless taste of success. The best part is that there is absolutely no impact to the water flow on my regular faucet and the new faucet provides water at pretty much full pressure. I'm sure this will go down over time but it is much better than my old filter. Looking at this solution I can see where if I ever so desired to step up to the two or three cartridge solution I could easily swap out the bracket by simply removing the plastic hoses from the friction locks. So if you are questioning whether you need the single cartridge or three cartridge solution know that you should be able to easily upgrade.
Scritto da: zone6
Very high quality and a fraction of the cost
I replaced my reverse osmosis and all the trouble of multiple filters with this. Should have done it years ago. We still have a counter Berkey for the highest level of filtration but now can wash veggies and other uses that don’t require super pristine filtration
Scritto da: Sanjay K. Aiyagari
Simple to install, great taste
This is really simple to install (especially since my plumber installed a shutoff valve) and greatly improves the flavor of the water. It is just twist off the old and twist in the new. Yes the unit needs to have been mounted high enough off the base of the cabinet (I see the complaints from others), but the plumber should have done that properly in the first place! The refills are expensive, and unfortunately there is no real way to know when to use refills - they say 500 gallons, but how do you know when you have used 500 gallons?
Scritto da: noe gutierrez
Buen sabor en el agua 0% cloro
Lo recomiendo agua saludable sin cloro
Scritto da: M
Easy Change
The twist feature makes these filters easy to change within minutes.
Scritto da: Saul Rodriguez
Bueno
Esta muy bien el filtro
Scritto da: Luis
Muy fácil de instalar
Producto excelente, el acabado del material de la llave es bueno, el filtro trabaja de manera correcta, y ya no se siente sabor en el agua. Es un producto muy bien hecho. Es muy fácil de instalar sin necesidad de mucha herramienta ni cobocimiento. Viene muy bien explicado como realizar la instalación.
Scritto da: Vwiz
Fresh, clean tasting water - great!
I had just purchased a second Consumer Reports check rated room humidifier and was using tap water in both... until I saw the white mineral dust accumulating everywhere. Consumers Reports just had an article about humidifiers and recommended an under sink filter... this Culligan US 4 EZ filter that was highly rated to reduce minerals. Before ordering, I read the pdf owners manual (did you see the link on the page?) I knew the included 1/2x1/2 inch T wasn't going to work and a trip to the hardware store would be needed. At this price point you might expect Culligan to include another 3/8x3/8 T, but no. My supply pipe is 1/2 to the valve, then 3/8 to the faucet. Fortunately, the guy at the hardware store found the appropriate T and an additional nut/ferule/insert for the 1/4 inch plastic tubing that fit perfectly. The next problem was where to mount the filter head. One side of the under sink cabinet had the garbage disposal, the back wall faced the outside (and potential freezing) leaving the side next to the dish washer. That wall was too thin for the long screws that were included. I just happened to have a 6in x 6in x 3/4 block of wood that I Flex Glued to the wall after marking and installing the filter head mounting screws. I left the screws slightly loose in order to lift the filter off and pull it out for easier filter replacement. That just left connecting the water lines, which was as easy as laying on my back and reaching wayyyy up behind the sink to first hand tighten the nut to secure the faucet to the sink (the hole was already in the stainless steel sink), then again with a wrench to tighten the water line to the faucet. Pushing the water lines into the filter housing was easy, just be sure to push in to the marked lines on the hose. After running water for ten minutes (to clear the charcoal dust fines from the filter as per the instructions) I tried my newly filtered water and was surprised on just how clean, wet and tasteless it was. Excellent! I then filled my humidifiers with filtered water and now enjoy dust free humidity. I am also now using far fewer plastic water bottles... actually, I have used 0 water battles since this install. I also tried using filtered water in my Keurig coffee maker. Guess I was used to the tap water taste because I didn't care for it. I tried half tap water and half filtered water and that worked great. The faucet is designed so that the LED indicator is facing you, that puts the handle on the right hand side. That handle could be better designed, but works ok. The faucet nozzle snaps into place and is pretty wobbly but does not (yet) leak. Overall, CR had it right.
Scritto da: Chris Goodfellow
Beware 'cheaper' knock-offs
Bought as a replacement element for existing plumbing. It is important to 'match the numbers' of the cartridge being replaced as there are different attachment fittings. Also, the '-3' denotes microns of filtration - get the one right for your needs. Used on a boat to filter tank water. Provides good tasting, clear drinking water and removes numerous impurities. There are 'cheaper' choices out there but, as usual - 'you get what you pay for'! I'd recommend this product for quality and decent value.
Scritto da: Clare Cudmore
So convenient and it really is easy!
This is the fourth time I've bought this filter for different taps in different houses. I love it. It's a relatively easy set up and the ez filter works better than a Brita and so much cheaper and more convenient in the long run. No need to get frustrated when someone doesn't remember to refill a pitcher. If you live in Canada the included connector for the water line likely won't work. Save frustration and order the correct connector at the same time. Search Amazon for B07JVM7WLS - for us with the 3/8 braided lines it worked - this one is a 3/8 x 3/8 x 1/4 connector. This was $20. I wish I could put one in at my work as well! Highly recommend!
Scritto da: R.G.
Happy with the purchase
Works as advertised. Easy to change
Scritto da: Neil R.
East to Install with Great Tasting Water ...
Initially, I installed the Culligan RC-EZ-1 EZ-Change Level-1 Replacement Cartridge, then this time around for a new cartridge replacement I decided to try the RC-EZ-4-Change Level-4 Replacement Cartridge. I think that the water from this new filter tastes a little bit better than that of the EZ-1 Cartridge. Great overnight delivery, easy to install, and great tasting water! Well done Culligan!
Scritto da: cac2222
Finally a product that just works...
I installed the IC-EZ-4 to pre-filter the water before going to my refrigerator water dispenser that also has a filter (LG). The problem with my fridge with only the LG filter is that the water still smells and tastes like chlorine and who knows what... This is why I needed an additional filtering solution. The IC-EZ-4 completely removes the odor and the bad taste and makes for perfect water and Ice from my fridge. It was very easy to install and I was up and running in less than 15 minutes. I installed the unit in my utility room in the basement, just below my refrigerator and transitioned my PE 1/4 tubing to my existing 1/4 copper with a 1/4 compression coupling.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array