CURT 13392 Attelage de remorque Classe 3, récepteur 2 pouces, compatible avec Select Jeep Wrangler JL, Noir

Name: CURT 13392 Attelage de remorque Classe 3, récepteur 2 pouces, compatible avec Select Jeep Wrangler JL, Noir
Brand: CURT
SKU: 0612314133925
Price: 222.13 EUR
Availability: InStock

Brand:CURT

3.8/5

€
222.13

Beau mini drapeau de jardin militaire avec support de poteau de bannière de jardin en métal - Ensemble complet avec support mural Fansy - 12 x 16 Porte-drapeau en métal à revêtement électrique Breeze Decor propose une variété de drapeaux de jardin pour toutes les occasions. Conception unique pour accrocher une utilisation intérieure ou extérieure. Nous nous engageons à vous offrir des valeurs exceptionnelles. Nos clients aiment afficher notre ensemble de drapeaux de jardin pendant de plus longues périodes. Spécification : thème : militaireTaille : ensemble de drapeaux de jardin 13 x 18,5Taille : support mural Fansy en métal Impression : recto-versoLisible : lisible des deux côtésMatériel : 3 couches résistantes aux intempéries Aux États-Unis, le forfait comprend : 1 pc x mini drapeau de jardin 13 x 18,51 pc x matériel de bannière de cour en métal Depuis plus d'une décennie, nous nous consacrons à la fabrication de drapeaux sans comparaison de qualité et de beaux designs. Nos drapeaux sont fabriqués avec notre matériau Pro Guard qui est doux au toucher et les motifs peuvent être lus correctement sur le drapeau. Une fonctionnalité que nos clients vont adorer. Nous nous engageons à utiliser des encres écologiques qui ne laisseront pas d'empreinte dans notre environnement. MPN : BD-MI-GS-108432-IP-BO-03-D-US20-BD 08432 58432

Montant

Ajouter au panier Acheter maintenant

EAN: 0612314133925

Catégories Automobile, Accessoires extérieurs, Produits de remorquage et treuils, Accrochements, Récepteurs,

FACILE À INSTALLER. Cet attelage offre un ajustement personnalisé en usine sur certaines années modèles du Jeep Wrangler JL. ROUILLE, ÉCAILLAGE, RÉSISTANT AUX UV. Cet attelage de remorquage est protégé par une finition unique à double couche de revêtement A liquide résistant à la rouille et de revêtement en poudre noire très durable. Les deux finitions sont polymérisées ensemble pour une résistance exceptionnelle à la rouille, à l'écaillage et aux rayons UV. ENTIÈREMENT TESTÉ. Chaque conception d'attelage de remorque CURT de classe 3 est testée dans des conditions réelles sur véhicule dans notre usine d'ingénierie de Detroit. Les attelages du marché secondaire sont testés selon les normes SAE J684 pour une sécurité maximale lors du transport. CONCEPTION POLYVALENTE. Cet attelage de classe 3 équipe votre véhicule d'un récepteur d'attelage standard de 2 pouces x 2 pouces, permettant une grande variété d'options de remorquage. Il peut accepter un support à boule, un porte-bagages, un porte-vélos, un crochet de remorquage et bien plus encore. FORCE FIABLE. Cet attelage de remorque est conçu pour 3 500 lb. poids brut de la remorque, 350 lb. poids de la langue, 4 000 livres. capacité de répartition du poids et 400 lbs. poids de la languette de répartition du poids (limité au composant de remorquage le moins bien noté).

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 692 ratings 4.7 out of 5 stars
Exterior	‎GLOSS BLACK POWDER COAT
Finish Type	Powder Coated
Item model number	‎13392
Item Weight	18 Pounds
Item Weight	‎18 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎13392
Material	Carbon Steel
Model	‎Class 3 Hitch
OEM Part Number	‎13392
Product Dimensions	‎15 x 12 x 9 inches
Vehicle Service Type	Pickup Trucks, ATV, Car, Sport-Utility-Vehicles, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: sherri fox

Appears very well made, easy to install.

Instructions are simple as is the install. Our 2023 Rubicon did have the existing outer bolts with the welded in nuts. Once these were removed, just use a screw driver to separate the outer metal piece and slide the receiver in between as noted in the instructions. It helps to have a rubber mallet to adjust and align the holes. I did not have to loosen the muffler to get the nuts in. I did use some blue loctite on the bolts.

Scritto da: Wcjeep

Easy install

Installed on 2dr JL Wrangler Sport. For use with bicycle rack. No wiring to be installed. Took 5 - 10minutes to install. Fits like a glove. Directions say to loosen exhaust. Didn't bother. Bicycle rack fits. Would recommend for bicycle rack use. JL has low tow capacity. No intention to tow with 2dr.

Scritto da: Joe Louis

Perfect

2019 Jeep JL Do Not Buy cheaper versions as I tried 2 other from Amazon at half the cost. They both had 1/8 gap. Manufacturer said its fine, just tighten the bolts. Returned them and sucked it up and bought the Curt. No comparison as this is really heavy and just tight enough needed a mallet to position around frame. 15 min job and perfect. Worth the extra $50

Scritto da: S. W.

Fit 2014 Jeep Wrangler

2014 Jeep Wrangler. Ordered this one because I read it would be a little longer than stock. It is probably 2” longer. I have an after market bumper so it helps that the mount is a little further back. Bolted up with no problems with the supplied hardware.

Scritto da: Chris Maldonado

Perfect fit ordered for jeep 2020 wrangler

Perfect fit super easy to install five minutes

Scritto da: Amazon Customer

Perfect fit for a 2019 Jeep rubicon 4 door JL

This was a perfect fit for my Jeep rubicon 2019 JL- it was worth the money -I had some noticeable scratches from obvious shipping mishandling but I didn’t bother sending it back - I did not have to loosen or drop the muffler or remove the bumper to instal - My vehicle has the L bracket or plate in between the bumper and the frame - what I did was remove the 2 long bolts from the plate using a 19mm socket and then removed the 2 bolts from under the bumper that hold the plate as well with a 10mm socket - After that I lined the hitch up in place and wiggled it into place behind the plate - Don’t get me wrong it was very tight fit - I had about 4 inches left to completely line up the holes - I used a rubber mallet and taped into place to align with the holes - I used the original bolts on the 2 outsides first ( the plate I have had 2 welded nuts on each end to thread into ) once I had them in place I snugged them up really good - I then used the hardware curt gave and worked from there - the only difficult part was trying to Hold the nut into place in between the bumper and the alignment hole - what I did was use a piece of tape to hold the nut on a 19mm metric wrench and tighten the bolt towards the nut - once it connected I removed the tape and then I was able to tighten it down - total time for this project for me was 30 minutes by myself - hopefully this review helps anyone - this was my first time doing a project like this as well -

Scritto da: Taylor King

Curt quality, excellent finish- fit JL Perfectly

First and foremost I am a mechanic and I am not in the business of installing trailer hitches but I found this one very easy to install. I have three tools total to install this trailer hitch. It took me about 15 minutes doing it on my back and I did not have to lower the exhaust or enlarge any holes. I did however reuse the two outer bolts because they had a welded nut already attached. I cannot say whether the OEM bolts are okay for the application but my little trailer is just to pull a lawn mower. If I had to remove that plate and get the welding nut off it would have added much more time but the bolts are very big and I would say that it is okay for the application.

Scritto da: Tom K

Super easy to install

Very easy to install and works great. Only four bolts and you are ready to use! I did not have to loosen anything as shown in the directions.

Scritto da: Tom Roumeliotis

It's great & an easy install.. even for a non-mechanic like me.

Nice trailer hitch. Got it from Warehouse Deals for half the price. You could tell it was returned. I guess it didn't fit the other guys Jeep. Went in, nice & tight on my 2020 JL. Had to use a small sledgehammer to persuade it slightly (use a 2x4, do not use the hammer on the steel). Also, make sure you have all 4 bolts in place before you start tightening them. All in all, a great hitch and a great deal. Now, I just need the wiring harness, which is sold separately.

Scritto da: Mike Ewanciw

Nice quality and somewhat easy to install

Good quality hitch installed on a 2018 Jeep Wrangler Sahara JLU 4 door. Was installed to be able to use a 2 stall bike rack for electric bikes. Came with all the necessary hardware and instructions. Small issue with having to file down some welding slag on the Jeep frame as this hitch is a very tight on the Jeep frame. Used a car jack to lift into place and then tightened the bolts. Used 2 of the factory bolts and 2 of the supplied bolts. No wiring harness is included with the hitch so that will have to be ordered separately. Would recommend for use on your Jeep as it seems like a very strong and durable hitch.

Scritto da: Chris L.

Perfect fit 2019 Wrangler

Perfect fit for my 2019 Wrangler Sport JL 2 dr

Scritto da: Frank Wolfenber

Installed without any issues.

The hitch arrived as promised and was very well packaged. The hitch is of good quality and well finished. Installation was easy and did not require any other parts to be repositioned - there were not clearance issues with the muffler. I have used it to mount a bicycle rack and it works well with or without a receiver extension. I am happy with the product and recommend it.

Scritto da: Mike bodnar

All good once I straightened the plate

It was re taped and repackaged so I have to assume it was returned before. But the reason was the one plate was bent in. So pulled it out and it went on easy.