CURT 56229 Faisceau de câblage de connecteur USCAR de rechange, fils de 61 cm, câblage de remorque à 7 broches, noir

Brand:CURT

3.8/5

43.88

Comme les attelages de remorque et les supports à boule, les connecteurs électriques varient en termes de forme, de taille et de capacité, mais quelles que soient les fonctions électriques de votre remorque, vous avez besoin d'une connexion solide pour maintenir le courant et assurer la sécurité sur la route. Les connecteurs électriques CURT sont conçus et fabriqués pour vous offrir une connexion fiable chaque fois que vous branchez votre remorque. Ce faisceau de remplacement USCAR à 7 voies est conçu pour remplacer une prise USCAR existante et alimenter les feux arrière, les clignotants, les freins de remorque électriques, une batterie, les feux de recul et les feux de freinage, ainsi qu'une connexion au sol. Il est doté d'une construction en plastique noir antirouille et est livré avec des fils à code couleur et 24 fils collés pour une épissure facile dans le système de câblage de votre véhicule. Ce connecteur USCAR à 7 voies est une prise femelle, spécialement conçue pour le côté véhicule de la connexion.

Adapte les véhicules à 7 voies de type USCAR résistant aux intempéries aux véhicules non équipés en utilisant les références CURT 55415, 55515, 55664, 55774, 56415, 56515 ou 57101. Fabriqué aux États-Unis. Comprend 24 fils collés à code couleur pour une installation facile. Remplace les harnais de véhicule USCAR endommagés ou manquants.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 929 ratings 4.7 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎56229
Item Weight 0.49 Pounds
Item Weight ‎7.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56229
Material Plastic
Model ‎USCAR Plug
OEM Part Number ‎56229
Product Dimensions ‎9 x 4 x 3 inches

3.8

13 Review
5 Star
81
4 Star
12
3 Star
5
2 Star
0
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Kevin Kelley
Easy install
Believe it or not, it was easier to splice this in than to install the one with plugs already on the ends. Did not have to trace out the wires into the frame and disconnect the plugs risking damaging them.
Scritto da: Uncle Duck
Very Good, 2 Improvement opportunities
This seems to be a well made harness with adequate wire size and complete set of crimp style connectors and heat shrink tubing to seal up the splices. The first thing I noticed was the connector end had "Adelphi" on the part, so we know who actually made it. The crimp on crimp on connectors were uninsulated sleeves which crimped securely onto the wires. They were all the same size and would not fit over all the strands for the ground wire which is a larger wire size than the others. I had to cut off some of the strands of the ground wire to make it work. The other minor item was the heat shrink tubing for sealing the splices was relatively large compared to the wire and crimp connector size making it right at the lower limit to shrink the sleeve. I had some other heat shrink, 3/16" diameter, that I used.
Scritto da: Amazon Customer
Everything fit and it worked the first time
I replace the corroded connector on my 2012 F150. It was money well spent.
Scritto da: Main Character
Good value.
This harness was not a wire-for-wire color match to my GMC truck, but it was easy enough to clip the wires on the old harness and compare them to the new harness, matching up the colors by their position in the back. Simply make sure the wires from the new harness are butt spliced to the truck wires according to the corresponding position in the old harness, rather than by color alone. What I did was to compare the two and use a piece of tape to label the harness wires that needed to be spliced to different color wires on the truck. I use marine-style butt splices because I prefer them, but the kit comes with adequate crimp connections. If you use those, slide the shrink tube on first before crimping the wires together. Then use a heat gun or a lighter to shrink the tube to make the connection watertight. I wrapped the wires from one end to the other with electrical tape to make it easier to keep them neat.
Scritto da: Jason H. Cox
It's the little things that are important, and this gets it right.
Product worked exactly as it was supposed to. One thing I realy appreciated was how long the wires were which made it easier to install, and that the insulation at the ends of the wire were pre cut, and once removed the perfect amount of wire was exposed to insert in a connector. Well Done.
Scritto da: D. BOLLER
Perfect replacement for my 2006 Silverado factory trailer wiring
So my 6 month old Labrador was laying in the shade of my truck and must have been bored or mad, because she chewed all the wires going to my trailer light receptacle. BAD DOG! I ordered this wiring harness and had it fixed in about 30 minutes. I did have a couple wires that did not color match, but I had taken a pic of the old connector so I had the position of the wires in the socket. Once wired, it snapped right in the the back of my receptacle.
Scritto da: MORSE FAMILY
Read instructions
Really simple to install, one wire at a time, by understanding that the wire colors are likely not going to match up. Every vehicle wiring harness will be different. Just go one by one around the plug and you'll be fine. Mine was in an F-150, plugged right in.
Scritto da: ETC
Works as stated
I would have liked those 3-way plugs instead of those press on ones that pierce the insulation.
Scritto da: Hunterman
Easy to install if wired in already.
The plug was ripped off my truck so bought this to match my vehicle. easy to install, same colored wires hooked up and worked great.
Scritto da: 2stroke
Easy fix
Good quality, spliced into my GMC Sierra 2500 as I had some corrosion on factory plug.
Scritto da: Amazon Customer
thinks need to fit your vehicle
This was exactly what I needed and was easy to install
Scritto da: Rick Davey
Great product
Love this product it worked really well the fit is great I now have it installed on my truck and it worked great
Scritto da: A.J.
a little confused
this product fits the Curt 57101. But Amazon says it does not fit my 2013 Tacoma. But Amazon says the Curt 57101 does fit my 2013 Tacoma???? Bought it anyway because I could not wire my Curt 57101 with out it.

Produits connexes

hot
POLLAK 11-410 Prise 4 voies chromée
3/5

€ 25.94

POLLAK 11-410 Prise 4 voies chromée
3/5

€ 25.94

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array