CURT 56291 Faisceau de câblage de remorque à 4 broches côté véhicule, compatible avec certains Honda Pilot, passeport, noir

Name: CURT 56291 Faisceau de câblage de remorque à 4 broches côté véhicule, compatible avec certains Honda Pilot, passeport, noir
Brand: CURT
SKU: 0612314562916
Price: 79.20 EUR
Availability: InStock

Brand:CURT

3.7/5

€
79.20

Type de système électrique : 3 W. HOUSSE DE PROTECTION. Pour favoriser une utilisation durable et une résistance aux intempéries, ce faisceau de câbles d'éclairage de remorque à 4 pôles est livré avec un cache anti-poussière en caoutchouc. Il s'adapte facilement sur le connecteur plat 4 voies lorsqu'il n'est pas utilisé, le protégeant ainsi des éléments extérieurs. PUISSANCE FIABLE. Ce faisceau de câblage de remorque à 4 voies est construit avec la technologie de montage en surface. Ce type de circuit génère moins de chaleur, une intensité lumineuse optimale et des performances durables. SPÉCIFIQUE AU VÉHICULE. Ce faisceau de câblage de remorque de véhicule de rechange est conçu pour certaines années du Honda Pilot et Passport (ensemble de remorquage d'usine requis). CONNECTEUR STANDARD. Ce câblage de remorque enfichable à 4 plats peut être utilisé pour connecter les feux arrière de la remorque, les feux de freinage et les clignotants. Le câblage des feux de remorque à 4 voies est populaire sur une grande variété de remorques, ajoutant des options de remorquage polyvalentes pour votre véhicule. FACILE À INSTALLER. Pas de découpe ! Pas d'épissure ! Ce kit de faisceau de câbles de remorque se branche sur le câblage d'usine existant de votre véhicule et l'équipe d'un connecteur de câblage de remorque arrière standard à 4 broches pour brancher et tracter une remorque.

Montant

Ajouter au panier Acheter maintenant

EAN: 0612314562916

Catégories Automobile, Accessoires extérieurs, Accessoires pour remorques, Hardware, Connecteurs,

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 749 ratings 4.7 out of 5 stars
Exterior	‎Painted
Item Dimensions LxWxH	9 x 4 x 3 inches
Item model number	‎56291
Item Weight	‎16 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56291
Material	Rubber
Model	‎56291
OEM Part Number	‎56291
Product Dimensions	‎9 x 4 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: MadArtDesigns

It fits

It fit my 2021 Honda Passport Exl, no issues. Look up a YouTube video if you're struggling on how to do it with the instructions

Scritto da: Neil Marion

Easy installation

Works great and easy set up in a 2019 Honda Pilot. No need to remove molding. You can reach the hook up within the interior gas funnel access door. Took 15 minutes max to install.

Scritto da: davispp

Works

Just what was needed

Scritto da: Jeremy

Mine was missing a fuse

Overall good quality product, plenty of cord so there was no issue running it where I needed it. However, mine was missing the bigger red fuse to install on the wiring. Didn't realize this until I went to hook up a trailer and the lights didn't work. Had to take everything apart and found a forum that someone else had the same issue.

Scritto da: Clair Crossland

Good product; Poor instructions

I bought this wiring harness and successfully installed it in our 2016 Honda Pilot IN SPITE OF the CURT installation instructions. Of the 14 steps for installation, 7 are totally unnecessary. There is no need to disconnect the negative battery terminal, which is a real pain in the Pilot. Next they have you pulling out most of the car's interior trim in the rear area. There is no need to do that. Just pop off the cover for the car jack access (driver's side rear corner) and the cover for the electrical access just above it. That eliminates steps 1-6 and all the replacements in step 13. Feed the white connector from the wiring harness up from the jack access area to the electrical access area. Feel around in the electrical access area until you locate the rectangular connector housing. Work it down far enough for you to attach the white connector from the harness and click it on. Unscrew one of the metal screws on the metal bracket in the same area and attach the grounding wire. Insert the 10 amp fuse in the red fuse holder. Here you have a choice: The instructions call for just dangling the 4-flat plug out the back of the car when it is use and coiling it up inside the car when not in use. I'm sure that is adequate but I didn't like that idea. Instead, I popped out the drain plug in the jack compartment and fed the 4-flat through the hole. I cut a slit in the edge of the drain plug and removed enough of the center so the wiring fits through the center of the plug. (When everything was in place I put a dab of silicon on the underside of the drain plug where the wire goes through just to make sure there will be no leaks.) Next, I fed the 4-flat and wire through the brackets supporting the rear bumper and over to the far side of the hitch. I pulled enough wire so the 4-flat reaches to the chain ring on the hitch. I fed the 4-flat through the ring then used the loop of the dust cover to secure it in place. Whichever choice you selected, use the adhesive pad to stick the converter box to the floor of the jack compartment where it will be out of the way. Coil up any excess wiring and secure it with the cable ties. Replace the 2 access panels. Install the 30 amp fuse in the fuse box under the hood as directed. BTW: The trailer lights worked as expected.

Scritto da: Brian Jerauld

High quality, perfect fit, awesome price

Installed on a 2022 Passport. Perfect fit. Plenty of YouTube videos on installation

Scritto da: drdipstick

Great fit form and function

This wiring harness is easy to install if you read and follow the directions closely. The pictures are very helpful. A familiarity with wiring, hand tools and a battery operated or electric drill is helpful. It is also helpful to have a stiff blade putty knife or similar tool for dislodging the plastic inner panels required to access the factory harness without damaging them. I also suggest that the work be done in a heated space to avoid any damage to the plastic panels that could occur in extremely cold weather. I also used a small piece of 2X4 wood to block open the side panel to allow two hand access to the wiring connections. I installed this harness on a 2016 Pilot and used the jack storage box as the storage compartment for the trailer harness. I also attached the ground wire under the inside back lower panel by drilling a small hole in the car body and using the supplied self taping screw. The fuse location under the hood is easy to find and identify.

Scritto da: Nam N.

plug and play unit

works just like advertised. the install is very straight forward for my 2018 honda pilot touring model. it's literally plug and play. I've trailered with it many times now with zero issues (including towing in rain). This type however is not a flush mounted system, so it does dangle out the back end of your trunk. so perhaps not the most aesthetically pleasing however best bang for buck as the dealership wanted far too much for something like this that does the job just fine.

Scritto da: ???? JS SAYN

WORKED PERFECTLY FOR 2019 HONDA PASSPORT

Super easy install and it did everything it needed to do to power up my Passport for towing. Please note that the Amazon vehicle fitment guide states that this part does NOT work for 2019 Passport, but it ABSOLUTELY DOES FIT. If you buy this harness, note that the supplied 30 amp fuse goes in the fuse box on the DRIVERS side under the hood. I lost about 1/2 hour of time because I watched a Uhaul, Youtube video that stated, 20 amp fuse on passenger side, which was incorrect for my Canadian touring model. Overall, very impressed and grateful for this harness. ???? JS SAYN

Scritto da: Stephen

Great product and easy to install

Excellent product. Pretty simple to install. The instructions require panels to be opened e.g. Honda Pilot however not necessary as you could connect without removing panels. Also, the unit can be mounted in the jack compartment using double sided tape. Took about an hour to install.

Scritto da: Amazon Customer

Good product

Feets for Honda Pilot 2016. Make sure to have some SIlicon to glue the hole in the body of the car through which you bring the wire out. Other than that everything is fine.

Scritto da: Amazon Customer

Good quality. Easy to install and use.

Installed this myself; a lot of information can be found online. No issues with the few times I’ve used it.

Scritto da: John F.

Perfect.

Top quality product, great price and very easy to install. Highly recommended.