Danco 10062 Pare-chocs universel, à utiliser avec les sièges de toilette, caoutchouc, 1 paquet, blanc

Name: Danco 10062 Pare-chocs universel, à utiliser avec les sièges de toilette, caoutchouc, 1 paquet, blanc
Brand: Danco
SKU: 082901273509
Price: 21.40 EUR
Availability: InStock

Brand:Danco

2.8/5

€
21.40

DESCRIPTION DU PRODUIT Ces pare-chocs de siège de toilette adhésifs offrent une alternative facile au remplacement d'un siège de toilette entier. Inclus sont (2) pare-chocs de siège de toilette ronds et (2) pare-chocs de siège de toilette oblongs. Ils disposent d'une construction en caoutchouc robuste qui offre résistance et durabilité qui aident à garder et à protéger votre siège de toilette. Ces coussinets de remplacement de pare-chocs sont capables de remplacer les pare-chocs à encliqueter, à visser et à coller du couvercle du siège de toilette. Ces pare-chocs de siège de toilette universels fonctionnent avec la plupart des marques et modèles de sièges de toilette, mais fonctionnent mieux avec un siège de toilette à surface lisse. Ces pare-chocs de rechange sont parfaits pour la réparation de votre siège de toilette. Commandez le vôtre dès aujourd'hui ! DU FABRICANT Danco est l'un des plus grands fournisseurs de réparation, de remplacement et de rénovation de plomberie dans l'industrie de la rénovation domiciliaire. Nous nous concentrons en grande partie sur l'autonomisation des consommateurs de bricolage avec des produits et des solutions de plomberie abordables qui créent des décors nouveaux et rafraîchissants pour les salles de bains et les cuisines.

Montant

Ajouter au panier Acheter maintenant

EAN: 082901273509

Catégories Outils et amélioration de la maison, Installations de cuisine et de salle de bains, Installations pour salles de bains, Toilettes et pièces de toilette, Sièges de WC,

Facile à installer. Comprend 2 pare-chocs de siège. Se fixe au siège de toilette avec des coussinets adhésifs sur mesure. Convient à toutes les marques et modèles de siège de toilette. Utilisé pour la réparation de siège de toilette. Facile à utiliser : nettoyez soigneusement les anneaux du siège des toilettes et gardez-les propres et secs, décollez le dos autocollant sur le pare-chocs du siège des toilettes et collez-le sur les anneaux du siège des toilettes, appuyez fort pour vous assurer qu'il peut coller fermement (ne pas utiliser pendant 10 minutes après l'installation). Design universel : design universel pour s'adapter à la plupart des marques et modèles de sièges de toilette (fonctionne mieux avec un siège de toilette qui a une surface lisse). Comprend : (2) pare-chocs ronds pour siège de toilette (2-1/4 pouces de long et 3/4 pouces de large avec une épaisseur/hauteur de 1/2 pouce) et (2) pare-chocs oblongs pour siège de toilette (3/4 pouces de diamètre extérieur avec une épaisseur/hauteur de 1/2 pouces). Rembourrage supplémentaire : remplace les pare-chocs de siège de toilette à encliqueter, à visser et à coller et la construction en caoutchouc adhésive avec finition blanche se marie avec la plupart des accessoires de toilette et de salle de bain existants. Coussinets adhésifs personnalisés : se fixe au siège de toilette avec des coussinets adhésifs durables qui aident à protéger et à protéger votre siège de toilette.

Assembled Diameter	‎1 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Danco
Color	White
Color	‎White
Country of Origin	‎China
Customer Reviews	3.8 3.8 out of 5 stars 4,773 ratings 3.8 out of 5 stars
Cutting Diameter	‎1 Inches
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Rough Plumbing;Parts and Repair;toilet-repair-kits
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2.97 x 0.59 inches
Item model number	‎10062
Item Package Quantity	‎1
Item Weight	0.08 Pounds
Item Weight	‎1.28 ounces
Manufacturer	‎Danco, Inc.
Material	Rubber
Material	‎Rubber
Measurement System	‎Inch
Part Number	‎10062
Shape	‎Round
Size	‎1 Pack
Style	‎Modern
Warranty Description	‎Limited 1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Linda J

Does the job!

They are working well on my very old (and blue Koehler) toilet seat. I opted to use a different adhesive instead of what came in the package, and they are holding up well. My suggestion to the manufacturer would be to include a small tube of E6000 adhesive, which does a great job.

Scritto da: Janet Prendergast

Don't last long

I had an old (about 30 yrs) wooden toilet seat and the original bumpers were cracking and falling off. The seat was in good shape and it's hard to find the good wooden ones anymore. So I saw these and figure this was the solution. Within a week they started falling off. One landed up getting flushed. I even tried to Gorilla Glue them on but that too failed. Maybe they will work better on the plastic seats but it didn't' hold on the wooden seat. I landed up replacing the seat with a plastic one.

Scritto da: Caroline Moniz

Works well

Way better then plastic bumpers that crack. These are of very good quality.

Scritto da: Tom

Just what I needed

My hard plastic toilet seat bumpers had cracked and come apart. These were just what I needed. After a couple of months they are holding up well. Very happy with them.

Scritto da: Vince Prybeck

Easy to install and work well, if they stay glued.

Easy to install, but they may fall off after a few months requiring glue to re-install afterwards. I've already done 2 of the 4 I got, but they stay after they are re-glued so far.

Scritto da: Kathleen

Not white

Says white....not, it is an off white.

Scritto da: adumas18

Doesn't stick

The tape it comes with does not stick at all to the toilet lid or even the product itself. I had to use wall hanging double sided tape I had to get these to stick. The actual product is sturdy but the tape is useless.

Scritto da: Just Joe

Did not use. Too small to match previous bumpers.

Not used.

Scritto da: Luc Labelle

They work great but, could have better adhesion from 3M.

They work great but, they could have better adhesion from the 3M double sided tape that comes with it . I had a hard time making it stick and finally they did when I installed them under the seat and sat down on it to apply pressure on them and they finally glued on correctly and are still holding great . I would have preferred screwed on than these but, the rubbers are of really good quality , it's just the double sided tape for me that's not quite the right one for the job , I think . I'm used to double sided tape for car moldings and it sticks a lot more than these ones but like I said , they did the job . Thank you .

Scritto da: Patrick

Only diamonds are forever, not these toilet seat bumpers.

Got these bumpers so that it would fill the gap between my toilet seat and rim caused by bidet installation. They really did not last long at all. They stick on for a bit then you find later they have fallen in the toilet. They don' t stay where they are supposed to. Perhaps its because I did not use crazy glue on them like some other people have suggested. Or even use crazy clue then hold in place with binder clips over night. This could help. At first I had them on the underside of the toilet seat itself. This seemed to work for a while then they would fall off. Eventually I tried sticking them to the toilet so that my weight would constantly keep them sticky and in place. I'm not sure how but they still somehow end up falling out into your toilet at some point. I would definitely agree that the stickiness that comes with these is not a long lasting method. The other side of the coin is that they are in kind of a dirty area. Eventually they are going to get dirty and you are going to want to replace them anyway. Just a thought.

Scritto da: Amazon Customer

Don't stick

These bumpers would be great but the glue pads just do not stick. The first one fell off in less than a week and after three weeks they are all gone. This was after carefully cleaning both surfaces. Won't buy these again as I literally flushed my money down the toilet.

Scritto da: Dale

Satisfied

I was unable to locate the exact size I needed (3/8”) for my toilet seat bumpers anywhere, so had to shave these half inch ones down to work correctly. They work perfectly now.