Danco 86712 Extracteur de cartouche Moen, paquet de 1, argent

Brand:Danco

3.5/5

€
41.66

DESCRIPTION DU PRODUIT Danco est l'un des plus grands fournisseurs de réparation, de remplacement et de rénovation de plomberie dans l'industrie de la rénovation domiciliaire, qui se concentre en grande partie sur l'autonomisation des consommateurs "Do-It-Yourself" avec des solutions de plomberie aussi pratiques qu'abordables, donnant à votre maison un plus appel frais et élégance renouvelée. Nous fournissons des solutions de maison innovantes et élégantes, axées sur le design et conviviales pour aider et encourager les clients à s'attaquer eux-mêmes aux tâches d'amélioration de la maison - sans le prix élevé des services professionnels. Retirez votre ancienne cartouche de robinet avec l'extracteur de cartouche Danco pour Moen. Cet outil est compatible avec Moen 1222, 1225 et 80933. Cet outil fonctionne pour les cartouches en plastique et en laiton. L'installation d'une nouvelle cartouche élimine un robinet qui fuit et permet d'économiser de l'eau et de l'énergie. L'extracteur de cartouche Danco facilitera votre installation de bricolage dans votre évier, votre salle de bain ou votre robinet de baignoire. Obtenez le votre aujourd'hui! DU FABRICANT Danco est l'un des plus grands fournisseurs de réparation, de remplacement et de rénovation de plomberie dans l'industrie de la rénovation domiciliaire. Nous nous concentrons en grande partie sur l'autonomisation des consommateurs de bricolage avec des produits et des solutions de plomberie abordables qui créent des décors nouveaux et rafraîchissants pour les salles de bains et les cuisines.

Montant

Ajouter au panier Acheter maintenant

EAN: 0362225732785

Catégories Outils et amélioration de la maison, Chargeurs, Pièces de robinetterie, Lave-vaisselle encastré In,

CONSTRUIT POUR DURER : La construction en aluminium durable offre résistance et fiabilité. Robinets de baignoire/douche : l'outil de retrait de cartouche fonctionne pour retirer les anciennes cartouches usées des robinets de baignoire et de douche Moen. Compatibilité des cartouches : l'extracteur de cartouche de robinet est conçu pour s'adapter et retirer les cartouches en laiton et en plastique. FONCTIONNEL : Enlève les cartouches gelées et déloge les manchons sur les robinets MOEN UNIQUEMENT. Compatible avec Moen : remplacez votre ancienne cartouche de baignoire/douche Moen Posi-Temp par Danco modèle 88431E (remplace OEM #1225), modèle 80993TS (remplace OEM #1200), modèle 88675A (remplace OEM #1222). Outil de retrait de cartouche : supprime les cartouches de douche à pression équilibrée Moen Posi-Temp séries 1200, 1222 et 1225.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Silver
Customer Reviews	4.5 4.5 out of 5 stars 3,801 ratings 4.5 out of 5 stars
Finish	‎Steel
Included Components	‎Cartridge Puller
Is Discontinued By Manufacturer	‎No
Item model number	‎86712
Item Package Quantity	‎1
Item Weight	‎4.6 ounces
Manufacturer	‎Danco, Inc.
Material	‎Aluminum
Measurement System	‎Metric
Part Number	‎86712
Product Dimensions	‎1.4 x 5.1 x 7.1 inches
Size	‎Pack of 1
Style	‎Puller
Warranty Description	‎Limited 1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Michael L.

Worked like it's supposed to.

Puller worked like it was made to, pulled it out to the limit of the pressure nut, pulled some by hand, but the old cartridge was half way out and still stuck. Took the puller off, got a 1 inch piece of 1 inch sch 40 pvc ( or get a 3/4 in pvc coupler and cut off what you don't need, both are 1 in inside diameter) and put it on the cartridge to extend the reach of the nut. Put the puller back on, turned the nut a few more times, and got the mangled mess of rubber all the way out. Disregard the youtube videos that say pull it out with channel lock pliers, unless you're feeling lucky and the cartridge you're pulling out hasn't been in there very long.

Scritto da: Robert J. Keltos

Worked great for removing old cartridge.

This is a must to remove the old cartridge without too much difficulty. Take your time and it does the job.

Scritto da: Robert K

worked pretty ok for me.

worked pretty ok for me, but it would be better if the pressure bolt were large to help remove the valve further.

Scritto da: Amazon Customer

perfect

just what I needed. Did the job.

Scritto da: Amazon Customer

prevented the stuck valve that was shown on you tube

arrived on time and as described, will keep for any future repairs sine all faucets in my house are moen first repair in thirty years

Scritto da: Steeler50

Works well and much cheaper than a Mown one. Save some money with tis one.

All good and works well.

Scritto da: Bez

Works like a charm

Did 3 cartridge pulls without a problem. Very easy to use and durable. I recommend for those stubborn cartridge replacements.

Scritto da: GEORGE FOLDI

Ease of use

This Moen Cartridge Puller worked GREAT. I tried using the instructions that Moan gave with the new cartridge and their way I would need three men and a boy pulling to get the cartridge out. Using this puller made it so much easier. Connect the puller to the old cartridge and then using a crescent wrench I just slowly kept turning the wrench on the puller and in about four turns the old cartridge started to move out of the housing. So relieved once it was removed. After that putting the new one in was a breeze. Would recommend this for anyone having to remove an old cartridge. To bad they don't make a universal puller for other cartridges.

Scritto da: Xenos

Good tool for its purpose

My 22+ years Moen bath/shower faucet had begun dripping at the handle whenever I turned the water on and for years had been stiff so I finally decided to fix it by replacing the cartridge with a new one. I initially tried to pull the old cartridge out using just a pair of pliers but I was unable to do so. I checked online for advice and saw a number of references to a Moen brand cartridge puller tool but it was listed at over CAN$40. The cartridge itself was listed at CAN$36 at one of the big DIY stores. Reluctant to pay 40 bucks for a tool that I would probably never use more than once, I looked for a cheaper alternative and I found it in the Amazon listing for this tool. Yes, the tool is made of aluminum rather than steel and some of the plating came off after using it but it worked like a charm and I was able to replace the cartridge with the new one very easily. Oh and the new cartridge it turns out didn't cost me anything because the faucet came with a lifetime warranty. So for the 20 bucks I paid for this tool, I was able to bring back my old faucet to a brand new condition and it now works smoothly without any dripping. Overall this is a good tool for its purpose.

Scritto da: Amazon Customer

Four Stars

Nice tool Thanks

Scritto da: Brett

Works good and worth the money

Very light material compared to my other puller.. but it worked well. I broke my other cartridge pulling it out with my other cartridge puller that was meant for a different cartridge so I wanted to get this one that was meant for my cartridge so I didn't break it and spend hours trying to drill out my cartridge being careful to not hit any pipe. I got the cartridge half out and broke it again with this one but that was my own fault because I started to put pressure from side to side instead of pulling straight out. . But having it half out only took a couple mins to destroy and pull out the old cartridge. So I would say this is worth buying just don't push side to side.

Scritto da: wilma elliott

An excellent tool that's simple to use

What a slick invention! The cartridge came out easily.

Scritto da: jrb_sland

Well made, will be worth the money with a very stuck cartridge

Several YouTube videos about replacing Moen cartridges use this {or similar} tool to make cartridge removal more effortless. Turns out I didn't actually need it this time around, but I have other Moen faucets in my house, and the tool sits quietly at the bottom of a bathroom cabinet drawer...