DROK® Petit multimètre numérique, DC 6.5-100V 50A Tension Ampérage Puissance Compteur d'énergie DC Volt Amp Testeur Wattmètre Jauge Moniteur LCD Affichage numérique avec rétroéclairage bleu avec shunt 50A/75mV

Name: DROK® Petit multimètre numérique, DC 6.5-100V 50A Tension Ampérage Puissance Compteur d'énergie DC Volt Amp Testeur Wattmètre Jauge Moniteur LCD Affichage numérique avec rétroéclairage bleu avec shunt 50A/75mV
Brand: DROK
Price: 39.13 EUR
Availability: InStock

Brand:DROK

3.2/5

€
39.13

Paramètres : tension de fonctionnement : 6,5 100 V CC Plage de mesure : 6,5 100 V CC Puissance nominale : 50 A/5 000 W Précision de mesure : 1,0 grade Avant d'utiliser le shunt de courant 50 A, veuillez régler l'échelle sur 50 A par défaut 100 A : Étape 1 : appuyez longuement sur le bouton et relâchez-le lorsque Curr s'affiche dans la zone de puissance. Étape 2 : à ce moment, la zone actuelle affiche 100 A, appuyez brièvement sur le bouton pour choisir 100 A ou 50 A, ce compteur nécessite un shunt de 50 A. Étape 3 : appuyez longuement sur le bouton pour quitter le mode de réglage ou le réglage sera automatiquement enregistré et existera si aucune touche n'est actionnée en 3 secondes. Plage de test et format d'affichage : Plage de puissance : 05kW nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; à moins de 1 kW, affichage 0,0999,9 W ; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; au dessus de 1kW, afficher 10005000W. Gamme d'énergie : 09999kWh nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; dans les 10KWh, affichage 09999Wh ; nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; au dessus de 10kWh, afficher 109999kWh. Tensionnbsp ; Gamme : 6.5100Vaffichage 6.5099.99V Currentnbsp ; Plage : 050Aaffichage 0,0050,00A nbsp ; Remarque : ce module est adapté pour l'intérieur, veuillez ne pas l'utiliser à l'extérieur. La charge appliquée ne doit pas dépasser la tension ou le courant nominal. L'ordre de câblage ne peut pas être erroné. nbsp ; Le forfait comprend: 1x multimètre d'alimentation CC

Montant

Ajouter au panier Acheter maintenant

EAN:

Catégories Outils et amélioration de la maison, Industriel et scientifique, Électricité, Multimètres, Tests électriques,

Le rétroéclairage bleu peut être activé/désactivé par l'interrupteur encastré accessible à l'avant situé sur le cadre latéral droit. Avec shunt externe, option par défaut 100A, 50A, veuillez d'abord sélectionner le shunt 50A avant de l'utiliser et veuillez noter lors de la connexion de la charge, l'alimentation CC - doit passer par le shunt pour connecter le compteur -. Multifonctionnel : l'énergie accumulée peut être réinitialisée par bouton ; Stocker les données lors de la mise hors tension ; Fonction d'alarme de tension (le seuil d'alarme de surtension, le rétroéclairage et la tension clignotent pour déclencher l'alarme). Plage de test de tension : CC 6,5 ~ 100 V ; Plage de test actuelle : 0 ~ 50 A ; Plage de test de puissance : 0 ~ 5 KW ; Plage de test d'énergie : 0 ~ 9999 kWh. Le multimètre portable dispose d'un grand écran LCD, peut afficher la tension, le courant, la puissance, l'énergie en même temps, lumineux et facile à lire.

Brand	DROK
Color	Blue
Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	200140
Item Weight	0.35 Pounds
Manufacturer	DROK
Power Source	Battery Powered
Product Dimensions	3.53 x 1.95 x 0.96 inches; 5.6 Ounces
Style	Digital

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: David Nicholson

Allows me to avoid Overloading my Motors

This device allows me to monitor the current and adjust the feed rate to maximize throughput without overloading the motor of my 5HP Surface Planner. I also have one installed on my 17" Band Saw for the same purpose.

Scritto da: Opa S

Didn't work

This was the second one I bought in a few years. The first one continues to work well, needed this for another project. I was surprised as to how poorly it was wrapped, looked to me like an item that was returned and reshipped in the same packaging it was returned in. This item did not work, would not display anything. If wired wrong they will be destroyed, my guess is that the person who returned it blew it and the vendor did not test the return. I really need one for my project so I ordered 2 more hoping at least one works.

Scritto da: S Eckert

50A version displays twice the actual current unless reconfigured, but has a more convenient shunt

This is for the 50A version with an external shunt on a plastic base, with separate holes to mount the base, connect the power leads, and connect the sensing leads. (The 100A version has no insulating base on the shunt, so you have to provide your own mounting base.) It's a fine meter but it reads twice the actual current and so shows twice the actual power used. The meter is the same for 50A and 100A, only the shunt is different. Both shunts are designed to produce a 75mV sense voltage at rated load, so the meter just translates the voltage across the shunt rather than internally measuring current. If the two shunts are different and the meter is the same... well, 3 stars. UPDATE: After the comment below, I found how to change the scale. Grudgingly giving all 5 stars because the paperwork does say it's possible... but nothing on the product page says it's not shipped with settings compatible with the ad and the shunt, and because almost everywhere in the "manual" says it's 100A (only).

Scritto da: BigEdB

It works great! Because of the above

There seems to be a plethora of these multimeters from various manufacturers out there. I purchased my first of the kind to monitor my solar battery bank (I'm totally off grid). I connected the meter in such a way that it shows zero amps and power when the solar array is charging my batteries, and conversely, when the bank is under load, it fully reads out all of the figures (volts, amps, power and energy. It works great! Because of the above, I have ordered another meter so I can monitor BOTH the solar array and the battery bank. I have the meters shunt on my solar control panel, and I have the meter at the end of 30 foot 4-conductor cable in my living area. Next project is to rewire the solar control panel and mount both meters (and a 0-100% LED battery voltage meter in a larger box, again in my living area. I HIGHLY recommend these meters if you have a need to monitor a system's volts, current draw in amps, power and energy use.

Scritto da: David M.

... Ham Radio and 3D Printing applications and they are GREAT! Especially the power used over time function

So far I have ordered two of these units to build power boxes for Ham Radio and 3D Printing applications and they are GREAT! Especially the power used over time function. I helped identify the power needs of equipment for various deployments. I have people asking me to build boxes with some of these in them just because of the awesome data you get when you have to operate on battery power for extended periods of time. One thing I didn't realize out of the gate (Because I didn't read the instructions thoroughly) was that they come pre-configured for the 100A shunt and you have to set that value, otherwise your measurements will be heavily skewed. Its easy to change and is just something to be aware of to set/check before going into the field and wondering why your equipment is almost using double the amperage you expected. :)

Scritto da: Patrick Donovan

not good with electronic noise

it works fine under most situations. when you have something with a stable load like a battery charger. if you want to use it to monitor things like current draw and voltage of a brushless motor the noise on the voltage source will cause the multimeter to reset and be stuck on the turning on screen where all the lcd is on. but to solve this I plan on using some capacitors to smooth out the noise to the multimeter

Scritto da: Ben Tyler

Be gentle while trying to mount it.

Comes programmed as a 100A meter. You need to follow the manual to change the settings if you buy the 50A version. Also the plastic clips are fragile and I broke mine while test fitting it into a metal holder.

Scritto da: DJ

I am pleased with this mittle meter.

This product works as advertised. I plan on using this meter in an emergency power pack for Ham radios and associated equipment. What I like about it is that it can be used as either a 100 max-Amp or a 50 max-Amp meter. Since I will be using it for about 30 Amp circuits (total), I chose to program it for the 50 max-Amp mode. Of course that required a 50 Amp shunt to go with it, but that was not a problem. Pay close attention to the instruction sheet as the programming, although not difficult, it is not obvious.

Scritto da: Daniel Ramirez

Confiable y buen diseño

Todo perfecto, excelente voltímetro y amperimetro!!

Scritto da: Rob101a

Use terminal crimp connectors.

Works great for load reading in and load reading out.