Dynamite WP 60A FWD/REV Brushed ESC, DYNS2210

Name: Dynamite WP 60A FWD/REV Brushed ESC, DYNS2210
Brand: Dynamite
SKU: 0787793858666
Price: 83.34 EUR
Availability: InStock

Brand:Dynamite

3.4/5

€
83.34

Caractéristiques principales * Étanche pour un fonctionnement par tous les temps1 * Compatible LiPo 2-3S et NiMH 5-9 cellules * Fonctions du programme modifiées avec l'utilisation de broches de cavalier * Jusqu'à une limite de moteur de 8T * Les pattes de montage amovibles créent une empreinte encore plus petite et permettent un montage dur dans une grande variété de véhicules * Mode de fonctionnement sur chenilles * Pré-câblé avec un connecteur de batterie EC3 et des balles de moteur compatibles RTR pour une installation facileVue d'ensembleCe contrôleur étanche et brossé est compatible NiMH/LiPo et offre des modes d'entraînement avant/frein/arrière, avant/frein et chenille . Sa compatibilité en fait un ESC de remplacement idéal ou la mise à niveau parfaite de votre ESC actuel non LiPo, non étanche ou limité. Bien qu'il soit étanche, ce composant n'a pas été conçu pour s'immerger dans l'eau pendant de longues périodes et devrait NE PAS être traité comme un sous-marin. Assurez-vous de lire les précautions générales indiquées dans le manuel de l'utilisateur.

Aucune unité disponible

EAN: 0787793858666

Catégories Véhicules et pièces détachées télécommandés, Pièces pour véhicules télécommandés, Systèmes d'alimentation & Driveline, Contrôleurs de vitesse électriques,

Les pattes de montage amovibles créent un encombrement encore plus réduit et permettent un montage solide dans une grande variété de véhicules. Jusqu'à une limite de moteur de 12T. Les fonctions du programme ont changé avec l'utilisation de broches de cavalier. Compatible LiPo 2-3S et NiMH 5-9 cellules. Étanche pour une utilisation par tous les temps *.

Country of Origin	China
Customer Reviews	4.4 4.4 out of 5 stars 125 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	No
Item model number	DYNS2210
Item Weight	2.08 ounces
Manufacturer	Horizon Hobby
Manufacturer recommended age	14 years and up
Product Dimensions	11.43 x 8.13 x 5.08 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Tom

Solid unit so far - update - Burning components

Using it, works great, its was part of a rebuild I did after cooking the components of my RC. I have slight problems with trying full throttle, it hiccups until I drop to say 80% then reengages at what seems like its 100%. Not sure thats the issue, I was using a motor that turned out to be bad so when I install and test the 3rd motor, I will know for sure, and willl update then. But it works great beyond the odd throttle issue, and Lipo capable. Update: it was the bad motor giving me that full throttle issue. New Arrma motor is fantastic with this ESC! Final Update before retiring unit permanently: Unit must be the problem, literally smoked and burned my brand new ARRMA motor after maybe 10 min driving with 7.4v 50c Lipo battery. Not sure I recommend anymore, unless maybe I am experiencing a fluke of a defective unit. Given the use and time since order, not fighting to exchange, just cutting losses, and replacing car at this point since this ESC has roasted my drive system, melted a servo from the inside out, and tried to again during this motor burn out too. Guess maybe too much current transfer from battery to components.

Scritto da: Coreader

Awesome esc for crawler

Works well and has crawler mode, waterproof works good and has stood up very well in my carisma coyote scale truck. I have one in my losi night crawker to.

Scritto da: Chad Walter

Great no frills, easy to set with jumpers ESC

Picked this up to replace a fried ESC in old Grasshopper. My LHS sold me one of these to go in a SCX10 crawler build I was doing and it has been bulletproof in that for a few months so I went with one of these for my Grasshopper. I normally use Castle Creations but they are a bit pricey to put in cars you don't run much and these seem to be perfect for those cars.

Scritto da: Okfoz

Great Brushed ESC for the buck.

Purchased this to get my old 1987 Associated RC-10 off the shelf, and back and in working order. I paired this with a Spektrum DX4C and the included receiver with the controller. Finally got it all connected, Took it out the other day and it works great, being able to use LIPO Batteries is an awesome plus, so I do not need to get some old style batteries. My only complaint is the included Female bullet connectors are not common, went to my local hobby shop and they did not have the same motor connectors...

Scritto da: Tina

Worked for my Nightcrawler SE

Direct replacement for your Losi Nightcrawler SE, works awesome and fixed my issues.

Scritto da: Jeff

Good, Basic Brushed ESC

I ordered this to replace the stock ESC/RX combo in an ECX Temper. It works fine, has a LiPo cutoff, and features a “crawl” mode which was important for my needs. I’ve had many Dynamite products in the past and this seems to be made with the same quality.

Scritto da: M. Klefbeck

Small, Powerful and Full-featured

This ESC is working great for me. I put it in a new 2WD Buggy and it connected up just fine. I relocated the removable power switch to the stock chassis location. I really like the option of using LiPo batteries as they REALLY liven up the action. I may buy another for my older 4WD street car.

Scritto da: Sean

My mistake

Honestly... I bought the wrong esc, I needed a dual motor esc for my rockslide, but I sold to my friend for his crawler and there was a marked proformence increase, the crawler setting was also nice

Scritto da: puech christelle

bon materiel

ce montage a remplacé le même qui était monté d'origine sur la voiture rc de mon fils. Donc, rien à signaler.