0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Enbrighten Z-Wave Plus Interrupteur intelligent en métal intérieur/extérieur 40 A, fil direct, 120-277 VCA, pour piscines, pompes, lampes de terrasse, unités AC, chauffe-eau électriques, 14285, gris

Brand:Enbrighten

3.3/5

€
199.67

Transformez n'importe quelle maison en une maison intelligente avec le commutateur intelligent intérieur/extérieur à fil direct Z-Wave Plus de GE 40 A. Lorsqu'il est ajouté à un réseau Z-Wave, l'interrupteur robuste permet le contrôle sans fil des fonctions marche/arrêt pour les applications câblées à grande charge telles que les chauffe-eau, l'éclairage paysager, les spas, les pompes de piscine et les chauffages. Le Smart Switch peut être utilisé à l'intérieur ou à l'extérieur et dispose d'un bloc de connexion filaire facile d'accès, de voyants LED montés à l'avant indiquant l'état d'alimentation et marche/arrêt, et d'un interrupteur de dérogation pour allumer ou éteindre manuellement les appareils connectés. Le Smart Switch est logé dans un boîtier verrouillable et inviolable pour garantir la sécurité des paramètres et du câblage. La conception robuste et résistante aux intempéries empêchera la saleté et les débris tout en étant adaptée à une utilisation dans des conditions météorologiques extrêmes.

Montant
Ajouter au panierAcheter maintenant

EAN: 0030878127264

Catégories Outils et amélioration de la maison, Électricité, Interrupteurs et gradateurs, Interrupteurs muraux, Interrupteurs à variateur,

Conditions environnementales : Pour une utilisation en extérieur dans des endroits secs, humides ou mouillés. CÂBLAGE À ACCÈS FACILE - Les bornes à vis clairement numérotées permettent des connexions rapides et sécurisées et sont protégées contre tout contact accidentel par une protection en plastique transparent. MODES DE FONCTIONNEMENT - Un interrupteur à bascule intégré permet le choix d'un fonctionnement manuel ou à distance avec les modes ON, OFF et Z-Wave. Des voyants LED sont visibles à l'avant du boîtier pour afficher l'état de l'alimentation sans ouvrir la porte étanche. SURVEILLANCE DE L'ÉNERGIE - Suivez à distance les watts et les kilowattheures lorsqu'il est connecté à un hub Z-Wave compatible qui prend en charge la surveillance de l'énergie. UTILISATION UNIVERSELLE - Avec de multiples possibilités de configuration, l'interrupteur bipolaire/unidirectionnel prend en charge 120-277VAC et jusqu'à 40A. Jusqu'à deux appareils 120 VAC peuvent être connectés avec des options de contrôle de charge simple ou double. RÉSISTANT AUX INTEMPÉRIES - Un boîtier métallique robuste NEMA-3R à montage mural avec porte verrouillable résiste aux éléments pour une utilisation en extérieur tout en protégeant le câblage et les paramètres contre les altérations.
Actuator Type ‎Push Button
Batteries Included? ‎No
Batteries Required? ‎No
Brand Enbrighten
Brand ‎Enbrighten
Certification ‎UL
Circuit Type ‎1-way
Color ‎Gray
Connectivity Protocol ‎Z-Wave
Connector Type Direct Wire
Connector Type ‎Direct Wire
Contact Material ‎Copper
Contact Type Direct Wire
Contact Type ‎Direct Wire
Control Method ‎Voice
Controller Type ‎Vera, Wink, Google Assistant, Amazon Alexa, SmartThings
Country of Origin ‎China
Current Rating 40 Amps
Current Rating ‎40 Amps
Customer Reviews 4.3 4.3 out of 5 stars 654 ratings 4.3 out of 5 stars
Included Components ‎Direct Wire 40A Z-Wave ES Smart Switch, Indoor/Outdoor
International Protection Rating ‎Not Rated
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 5.8 x 3.5 x 9.5 inches
Item Dimensions LxWxH ‎5.8 x 3.5 x 9.5 inches
Item model number ‎14285
Item Package Quantity ‎1
Item Weight ‎4.18 pounds
Manufacturer ‎Jasco Products Company, LLC
Material All metal case
Material ‎All metal case
Mounting Type ‎Surface Mount
Number of Items ‎1
Number of Positions ‎1
Operating Voltage 120 Volts
Operating Voltage ‎120 Volts
Operation Mode ON-OFF-ON
Operation Mode ‎ON-OFF-ON
Part Number ‎14285
Pattern ‎Switch
Product Dimensions ‎5.8 x 3.5 x 9.5 inches
Style ‎40 Amp | Direct Wire Switch
Switch Style Rocker
Switch Style ‎Rocker
Terminal Direct Wire
Terminal ‎Direct Wire
Unit Count ‎1.0 Count
Upper Temperature Rating ‎104 Degrees Fahrenheit
Warranty Description ‎2-year limited

3.3

4 Review
5 Star
71
4 Star
9
3 Star
7
2 Star
3
1 Star
9

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Vicw
Fits my need perfectly
I am using the Switch to allow me to disable power, controlled by my alarm system and Z-Wave HomeSeer Hub, to my Furnace and Whole house Dehumidifier Ventilator. In the case of a Smoke or Fire Alarm condition in my home, that would prevent feeding more oxygen to the fire. I am quite impressed with the industrial level of construction of the switch, although I question that it would really be suitable for an outdoor installation that is fully exposed to weather. Mine is installed in the basement, so that is not an issue for me. Installation was pretty straightforward, although I did run into problem initially with the Carrier Infinity HVAC. It refused to turn on at all when power was applied. I had the Carrier HVAC set up as Load 1, wired as 120VAC - Dual Load (Total of Both Loads Monitored). I believe that it must have internal circuitry, like an HFCI receptacle, which detects any current imbalance between the Neutral and Hot Line, and the pairing of the Neutrals on both Loads caused the disabling. I switched the Carrier over to Load 2, using the 120VAC Dual Load (Load 1 Monitored) configuration, to avoid the Neutral issue, and all is now well with both of the devices. I can't really blame the problem on the switch, so I didn't take any stars away for that. Pairing the switch to my HomeSeer Hub was surprisingly easy. The switch is about 20 feet from the Hub, but I have other Z-Wave devices in the house that can act as relays. With the switch set to the center OFF position, the door closed, and the Hub in Inclusion mode, a single press of the Manual Override switch was all it took to pair the switch successfully, and it's been stable in the couple of days since. I have to be careful with the peak currents between the two devices, so I'm monitoring the combined and individual device power demands to capture any peak demands on the 20 Amp circuit. So far, in about 24 hours, it hasn't shown anything running over about 9 A, so it's well below any level that would cause me concern so far. Worst case, if I do see any risky level of combined power demand, I guess I could get a second switch, but I'm hopeful I won't have to do that. The switch has no labels, so I used my handy label maker to make labels for my future reference.
Scritto da: A. W. Thompson
Working well with my Smartthings v2 hub
I've been using this for 2.5 months now with my 30Amp water heater. It paired with no issues to my smartthings hub. And I am using it to only have the water heater turn on when electricity prices are lowest. It's not perfect but it works well. For instance, if the utility power goes out, the total power usage is reset. Which messes with the power usage graph in Smartthings. The Enbrighten unit keeps track of the power usage itself and sends the info to smartthings. unlike my 15A switches that send the power info in real-time to smartthings. And Smarthings keeps track of total power usage. The Enbrighten unit will periodically send this info. It seems to be random. Instead of sending it every minute. Like other power monitoring devices I own. But those are minor gripes. The box is very sturdy and metal. Unlike other options, which were plastic. And the wires entering the box are very secure. From the grommets I installed in the knock outs. And from the included wire terminal. And the Enbrighten box has plenty of room inside for the wires as well. From a safety standpoint, it's the better option. Which is why I selected it. Even though the power monitoring is not in real-time.
Scritto da: Pubi
Used for sprinkler pump
Honestly, I can't speak to the z-wave programming much since I use the most basic of aspects (on, off, schedule). But so far, this was the easiest one to include in my Wink Hub 2. First off, I'm far from an electrical expert. I lucked out that the previous electrician labeled the cables in the old timer; making swapping out a million times easier. Now your set up may vary, but from the sprinkler pump came 2 cables only for me. Both are load since it is a 230 V motor. This timer handles up to 240 V. I'm not sure if it matters which is "load 1" or "load 2," but they attach to terminals 5 and 6 when doing a single pole setup (in other words only 1 item is being attached). This timer supposedly can handle 2 things being attached though. This is where the one and only issue with this service came up. The diagram shows load 1 goes to terminal 6 and load 2 to terminal 4. The 120 V setup also shows the load going to terminal 6. This tells me that terminal 6 is the main load bearing terminal. Yet the written instructions for 240 V single pole have the load wires connecting in reverse (load 1 to terminal 4 and load 2 to terminal 6)! This confused me quite a deal, but then I thought "aren't sprinkler pumps DC connections?" If so, then it shouldn't matter which lots goes to which since there is no positive note negative polarity. Long story short, I test ran out before screwing the box to the wall and the pump turned on. I followed the diagram, so proof following diagram for sprinkler pump works. The line cables attach to terminals 1 and 2. Ground goes to the ground screw on bottom center. I did find this an odd location since the old mechanical timer has the ground physically attached to the mechanism. Part of me doesn't fully believe the timer mechanism of this service is sufficiently grounded based on the designs of the old one. I'm also slightly concerned about a lack of ground to the motor itself. This isn't an issue with this item, more like I'm assuming the previous electrician may have cut it off. Now if you followed the terminals, you'll notice I have used terminals 1, 2, 4, and, 6. Terminals 3 and 5 get connected using a jumper cable that isn't included. I got lucky that I had some good electrical cable hanging around since we were remodeling. If not, I'd have to buy a spool just for about 4 inches of wire! It recommended to use the same type of wire used within walls (I believe 16 gauge solid copper) for the jumper. I had some 16 gauge stranded copper wire, but the package clearly states "low voltage use only." I'd say a 240 V application is far from low voltage. Pairing depends on your z-wave setup. Since I have Wink, there is no official compatibility for this device. Wink sees it as a light switch. I have emailed them a recommendation to add this device as a new category for heavy applications. Either way, it was included faster than any of the other switches I have. The day of writing this review was also the second time the schedule ran. I need to be out the door by the second zone being active. I woke up to the motor running. This is final proof that Wink is communicating the schedule to this device and it turns on and off accordingly. Funny final note: I feel this looks like a very fat antique cell phone once you attach the antenna ????
Scritto da: Jesus Salgado
Extremadamente caro
Aunque funviona bien, con la aplicación el precio es extremadamente alto, para poder usarlo con una app, nececitas un Hub. No tienen wifi, no es posible conectarlo a la red sin el hub que cuesta otros 80-90 más, además de esoalgunos hubs cobran una cuota mensual para poder usarlo. En resumen: extremadamente caro.

Produits connexes

hot
Leviton RE00R-WB Télécommande de gradateur de coordination Renu pour commande à 3 voies ou multi-emplacements, à utiliser avec REI06, en écorce de noyer
0.1/5

€ 56.60

Leviton RE00R-WB Télécommande de gradateur de coordination Renu pour commande à 3 voies ou multi-emplacements, à utiliser avec REI06, en écorce de noyer
0.1/5

€ 56.60

hot
Morris Products 82770 Gradateur tactile Ivoire
3.2/5

€ 41.60

Morris Products 82770 Gradateur tactile Ivoire
3.2/5

€ 41.60

hot
Leviton IPF05-1LZ W/I/LA SL VENTILATEUR SPD CTRL PRST LITE 5A120V
3.1/5

€ 74.16

Leviton IPF05-1LZ W/I/LA SL VENTILATEUR SPD CTRL PRST LITE 5A120V
3.1/5

€ 74.16

hot
Gradateur LED Diamant LDSD1M25
3.3/5

€ 91.27

Gradateur LED Diamant LDSD1M25
3.3/5

€ 91.27

hot
Gradateur de lumière à bascule intelligent Enbrighten Z-Wave avec QuickFit et SimpleWire, prêt à 3 voies, fonctionne avec Alexa, Google Assistant, concentrateur ZWave requis, répéteur/prolongateur de portée, blanc et amande légère, 46203 500S gradateur à palette blanc gradateur à bascule
3.5/5

€ 78.32

Gradateur de lumière à bascule intelligent Enbrighten Z-Wave avec QuickFit et SimpleWire, prêt à 3 voies, fonctionne avec Alexa, Google Assistant, concentrateur ZWave requis, répéteur/prolongateur de portée, blanc et amande légère, 46203 500S gradateur à palette blanc gradateur à bascule
3.5/5

€ 78.32

hot
Détails techniquesInformations complémentaires Garantie et support Commentaires
0/5

€ 82.07

Détails techniquesInformations complémentaires Garantie et support Commentaires
0/5

€ 82.07

hot
Transolid SA40591 Sensio Daybreak 24V 15W Dimmable Driver avec bloc ML 12 ports
0/5

€ 177.76

Transolid SA40591 Sensio Daybreak 24V 15W Dimmable Driver avec bloc ML 12 ports
0/5

€ 177.76

hot
Leviton RE00R-FP Télécommande de gradateur de coordination Renu pour commande à 3 voies ou multi-emplacements, à utiliser avec REI06, en limonade rose fraîche
4.1/5

€ 62.12

Leviton RE00R-FP Télécommande de gradateur de coordination Renu pour commande à 3 voies ou multi-emplacements, à utiliser avec REI06, en limonade rose fraîche
4.1/5

€ 62.12

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu