Enerlites 975503-S Couvercle de boîte de sol à charnière en laiton nickelé 4'', prise duplex 20A inviolable Argent

Name: Enerlites 975503-S Couvercle de boîte de sol à charnière en laiton nickelé 4'', prise duplex 20A inviolable Argent
Brand: ENERLITES
SKU: 0883951415563
Price: 88.29 EUR
Availability: InStock

Brand:ENERLITES

3.2/5

€
88.29

Le couvercle de boîte de plancher Energies 975501-S de 4 po peut être installé sur des planchers ou des comptoirs en bois franc, en carreaux, en moquette, en marbre et en granit. Nécessite une boîte de jonction pour le montage (vendue séparément). Associé au boîtier de sol PVC Energies et à l'anneau de nivellement, il peut être installé dans des dalles de béton. Ce couvercle à double bouchon à vis est livré avec une prise double 20 A inviolable/résistante aux intempéries, des joints étanches et des vis de montage. Le joint étanche et le matériel résistant à la corrosion garantissent une durée de vie plus longue du produit et des performances fiables. Les boîtes de sol sont un excellent moyen de moderniser votre maison ou votre entreprise, d'augmenter la valeur et la fonctionnalité.

Montant

Ajouter au panier Acheter maintenant

EAN: 0883951415563

Catégories Outils et amélioration de la maison, Électricité, Ruptures, Couvercles de prise de courant,

Réceptacle inclus. Conforme à l'article 406.14 du NEC 2011 pour les prises inviolables. Listé UL. Le couvercle rond de la boîte de sol peut s'adapter à l'anneau de garniture de la boîte de sol ENERLITES 975509 et à la bride encastrée 975518 (vendus séparément). À installer sur les planchers de bois franc, de carreaux, de moquette, de marbre et de granit. Dimensions de la couverture : 4 diamètres (101,6 mm). Dispose d'un couvercle et d'une quincaillerie en laiton résistant aux intempéries et à la corrosion pour assurer une durée de vie plus longue du produit. Fournit une prise au sol pour les emplacements commerciaux ou résidentiels. Boîte de jonction requise pour le montage (non incluse).

Assembled Diameter	‎4 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	ENERLITES
Brand	‎ENERLITES
Certification	‎Ul
Color	Silver
Color	‎Silver
Country of Origin	‎China
Customer Reviews	4.2 4.2 out of 5 stars 233 ratings 4.2 out of 5 stars
Cutting Diameter	‎4 Inches
Finish	‎Nickel Plated Brass
Finish Type	‎Nickel Plated Brass
Included Components	‎screws
Installation Method	‎Floor-Mounted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	4.33 x 0.79 x 4.33 inches
Item Dimensions LxWxH	‎4.33 x 0.79 x 4.33 inches
Item model number	‎975503-S
Item Package Quantity	‎1
Item Weight	‎9.6 ounces
Manufacturer	‎Top Greener Inc
Material	Brass
Material	‎Brass
Mounting Type	‎Floor Mount
Number Of Pieces	‎2
Part Number	‎705503-S-STICKERED
Product Dimensions	‎4.33 x 0.79 x 4.33 inches
Shape	‎Circular
Size	‎4" Dual Flip Lid
Special Features	‎Outlets
Style	Dual Hinge Nickel Plated Brass
Style	‎Dual Hinge Nickel Plated Brass
Switch Style	‎Toggle
Usage	‎Commercial/Residential

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: DKStewart

Nice cover, if a little thick

These covers are much thicker than the cover plates I was replacing. The extra 1/8" or so isn't a major problem where mine are located, but could potentially be a big problem if they catch an unsuspecting toe. Can be resolved, but will require moving the electrical box.

Scritto da: Joan Mattson

Good quality, nicely finished floor outlet cover

Purchased to replace original brass recessed floor outlet covers, which were difficult to access and looked dated. Quality: Very nicely machined and finished. I would prefer some mechanism in the outlet cover doors to lock open, as they have a tendency to fall back closed sometimes before you can get your plug inserted. I suspect this is a designed safety feature to eliminate creation of a tripping hazard by having the door open with no plug inserted. The machined tolerances are very tight so it is difficult to unlock and open (childproofing?) without mechanical assistance. Fortunately, a dime and a nickel are perfect "tools" to open without marring. The dime to twist the locking screw and the nickel to pry the outlet doors open using the slots. The 20 amp tamper resistant/water resistant outlet is good quality. Dimensions: The Enerlites covers are essentially the same 4" nominal diameter as the brass covers I was replacing. They are slightly thicker, so unless your floor box has height adjustment may not match the finished floor height in your installation. Mine was installed in carpet, so height was less critical than hardwood or tile would have been. Installation: I had to source #6 x 32 x 3/4" oval head screws to install the covers. This was necessary as the floor box I was installing into had used smaller diameter screws than is today's standard. If yours is a newer floor box, the #8 x 32 x 1-1/4" SS screws would have probably worked, but as some other reviews are have indicated their length might need shortening. I also found it necessary to trim the 4" nominal gasket to fit in the recess in my existing outlet mounting flange. I used a utility knife to trim about 1/8" around the perimeter. It your box is located above heated space and not likely to experience water exposure, leaving the gaskets out of the installation would be possible. Shipping: I ordered four (4) covers, which in the current CV-19 period came in four separate deliveries over several days. None of the deliveries were materially outside the dated quoted at checkout. Three of the four outlet covers came in sturdy cardboard boxes. The fourth was in a plastic bag inside a bubble wrap shipping envelope. I was worried that finish might have been compromise, but fortunately between the bubble wrap and shrink-wrap around the outlet no damage was noted. Overall, I would not hesitate to reorder should I have future need.

Scritto da: Cocktails by the Pool

Top quality construction but too deep for my application.

The all metal construction is very nice and sturdy; however, the recess must be extra deep to use this plate as the cover and the well are a single piece with no adjustment capabilities whatsoever.

Scritto da: MT - Colorado

Great low profile floor outlet

I like the low profile of this. And that you can use a single outlet or close both off (screw in the threaded cover) it not in use. I bought this to add extra outlet to my living room floor before I finish the basement below.

Scritto da: John Perri

Poor quality finish

The finish on this product was terrible. I called the company and they just referred me to Amazon. The company did not offer to send a replacement or any other option. Not good.

Scritto da: Martin Taylor

Heavy duty well-built floor box cover for flush install. Indeed smaller than 4 inches.

This is a very high quality floor box cover, with a thick brass construction and nice design for flush install with no bevel. It comes with all you need to install in a standard recessed electrical box - I bought it for a flush mount application in hardwood. The box is indeed 3.9" (or perhaps 3.88 as listed on some other products in this series), in spite of the fact that the Enerlites website as of 8/2017 says 4 inch diameter.

Scritto da: Kim Noble

Didn’t fit

Didn’t work to cover outlet. Hard to determine size from Amazon description

Scritto da: Ventureshadow

Okay!

The actual electric outlet was included in the box, so I received more than was pictured. It fit and worked ok. It looks ok.