Fluidmaster 550DFRK-3 DuoFlush Système de remplissage complet et de conversion à double chasse

Name: Fluidmaster 550DFRK-3 DuoFlush Système de remplissage complet et de conversion à double chasse
Brand: Fluidmaster
SKU: 0039961002037
Price: 61.37 EUR
Availability: InStock

Brand:Fluidmaster

3.1/5

€
61.37

DESCRIPTION DU PRODUIT Le système Fluidmaster 550DFRK Duo Flush vous offre un outil pour vous aider à utiliser moins d'eau et à économiser plus d'argent. Un système complet de remplissage et de conversion à double chasse. Le système à double chasse d'eau s'adapte à n'importe quelle toilette à clapet de 2 pouces et utilise jusqu'à 45 % moins d'eau que les pièces de réservoir d'origine. Convient aux modèles de 1,6 GPF et plus de 3,5+ gallons par chasse d'eau. Le joint en silicone durable dure des années. Tandis que la vanne PerforMAX régule le débit d'eau et améliore les performances globales. Réglable pour la pleine et la demi-chasse. Entièrement réglable pour une large gamme de réglages sans retirer la valve. Les pièces incluses avec l'achat du système complet Duo Flush comprennent : poignée à double action, valve de remplissage PerforMAX, valve de chasse DUO, clip de remplissage, tube de remplissage, rondelle de tige, contre-écrou de valve de remplissage, adaptateur de siège incliné (en option), contre-écrou de poignée à double action, pince à rouleau, et colliers de serrage. DU FABRICANT Fluidmaster, la marque de réparation de toilettes n° 1 au monde. La gamme complète de pièces de réparation de toilettes Fluidmaster comprend des vannes de remplissage, des vannes de chasse, des clapets, des leviers de réservoir, des vannes à double chasse, de la cire de cuvette, des kits de réparation de toilettes, des joints, des connecteurs et plus encore, et se trouvent dans plus de toilettes que toutes les autres marques. Le premier choix du client et le fournisseur préféré de garnitures de réservoir de toilette depuis 1957. Avec des installations de fabrication à travers le monde, Fluidmaster est présent dans plus de 90 pays dans le monde avec une qualité inégalée.

Montant

Ajouter au panier Acheter maintenant

EAN: 0039961002037

Catégories Outils et amélioration de la maison, Chargeurs, Pièces de WC, Vannes de chasse d'eau,

Valve de remplissage haute performance PerforMAX incluse pour un taux de remplissage 2 fois plus élevé. Remplacez les modèles inefficaces bruyants et lents à remplir. Pleine et demi-chasse, levier de chasse d'eau à double action inclus. Système complet de remplissage et de conversion à double chasse. Facile à installer et entièrement réglable pour une large gamme de réglages, sans retirer la vanne. S'adapte à toutes les toilettes à valve de chasse de 5,1 cm, 1,6 GPF et modèles antérieurs à 1994 de 3,5 gallons par chasse. Économisez de l'eau et de l'argent, utilise jusqu'à 45 % d'eau en moins. Convertissez votre toilette à valve de chasse de 2 po existante en technologie Dual Flush.

Assembled Diameter	‎8.19 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Fluidmaster
Customer Reviews	4.1 4.1 out of 5 stars 585 ratings 4.1 out of 5 stars
Cutting Diameter	‎8.19 Inches
Exterior Finish	Silicone
Included Components	‎Rough Plumbing;Parts and Repair;toilet-repair-kits
Inlet Connection Type	Barb
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	4.3 x 8.1 x 12.4 inches
Item model number	‎550DFRK-3
Item Package Quantity	‎1
Item Weight	‎1.55 pounds
Manufacturer	‎Fluidmaster
Material	Plastic
Material	‎Plastic
Part Number	‎550DFRK-3
Product Dimensions	‎4.3 x 8.1 x 12.4 inches
Size	‎2

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Kevin Campbell

Easy install

Easy to install and set up. Minimal adjustments required. My only complaint is the length of the handle because to do a half flush I have to lift the lid on the toilet. Otherwise better than my previous dual flush converter.

Scritto da: Brian K. Reynolds

It depends on your toilet's flush performance

Installation was a breeze. I spent 10 minutes skimming over the instructions, and probably 30 minutes for installation and adjustment. Adjustment takes the longest amount of time, because you have to keep flushing the toilet and waiting for it to refill before testing the next adjustment. I don't understand why some reviewers said that it took them so long to read the instructions and install the unit. I have lots of experience with replacing toilet fill valves and such, so maybe it was easier for me than it was for some people. As one reviewer mentioned, you have to make sure that you get the most current version of this product. I chose the lowest priced option with free Prime shipping, and the product came from the seller named "Innovative Retail Market". I received the old version of the product from this seller, so I cannot recommend them. Fluid Master happily replaced it with the newer model 550DFRK-1 (the -1 indicates that it is the newer version). I used my water meter to measure how much water my toilet used before I installed this unit. It used 1.9 gallons per flush (gpf). This is slightly more than the rated 1.6gpf printed on the toilet. I suspect that the difference has to do with the fact that the old fill valve over-filled the bowl a little, which allows more water to go down the drain. When I installed the unit and new fill valve, I set the water level in the tank at the same height where it was before. This resulted in unsatisfactory results. Even with both adjustment dials turned to MAX, the toilet would not flush. So, I adjusted the new fill valve to fill the tank to the "max fill" line, which is engraved into the inside of the tank. This allowed me to adjust the dials to allow a complete flush with both liquid ("half flush") and solid ("full flush") waste. The liquid adjustment was easy... if three sheets of toilet paper go down, the adjustment is correct. The solid adjustment took an extra day or two of using the toilet. I had to increase the solid adjustment once, in order to ensure a complete flush. I guess that was an extra-high-fiber day. LOL I eat lots of vegetables. I have been using it now for almost a week, and it works perfectly. As they say, the proof is in the pudding. So, I wanted to measure the water savings. Your results will vary, because each model of toilet has a different flush performance. My toilets are not the best performing water-saving toilets I've ever owned, but I'm a renter now... and I think my landlord would probably get upset if I replaced the whole toilet! With my current settings, a "full flush" uses 1.6 gallons, exactly what the toilet is rated to use. This is a savings of 0.3gpf, compared to what the toilet used previously. A "half flush" uses 1.3 gallons. While this isn't a huge difference (certainly not "half"), it is something... and would probably be better with a toilet which has a better flush performance score (yes, that's actually a thing). I used to own my home, and I installed toilets which had a flush performance of 10.0 (the highest possible). I think that those toilets would probably flush liquids with far less than 1.3 gallons. Unfortunately, I never installed a duo-flush valve in them. At my new place of residence, the cost of water is double what it was at my old place... so I'm looking at ways to save water. So... the important question is: "Is it worth the money to buy this device?" ... I estimate that this unit will save me about 50 gallons per person, per month. At my current cost of water, that's about $1.00 per person, per month. Since I only paid $18.99 for this thing, it will pay for itself in: 19 months in a 1-person household 9.5 months in a 2-person household 6.33 months in a 3-person household 4.75 months in a 4-person household etcetera ... Of course, if you buy two or three of them for all of the toilets in your house, you need to double or triple the number of months I mentioned above. In my case, yes... it was worth the money. I would have liked to see a lower gpf for liquid flushes, but... overall.. I'm satisfied. Oh, I should mention something else. Some reviewers complained that the handle seemed flimsy. I disagree. I think it is sturdy enough. Maybe they didn't tighten it enough, allowing it to wobble in the hole?

Scritto da: Daniel H.

Easy

Not sure if it really uses less water at the end of the day but it was easy enough to install

Scritto da: Richard M.

Water saver

Like that it's very easy for the DIYer. I would definitely buy it again

Scritto da: dan cope

Instructions could be better, not an East DIY install

I like the duel flush of this unit, and I was able to install it, however if you’re not an experienced DIY person I do not recommend this unit. If you have a better understanding about plumbing, spicificly tolit works, this MAY be a bit of a challenge for a person not familiar with toiled insulation. However if you feel you have a higher understanding of that type of plumbing I recommend this insulation.

Scritto da: Neal

Never thought

Great product but I wish the cable slack was a little less or the handle had less play in it. But the unit works flawlessly and no leaks so far

Scritto da: Jacob B.

Not sure about the longevity of this thing

Installed this a few months back and already the handle has started to stick a little and the small flush option sometimes does not actuate correctly. This kind of defeats the purpose of having one of these as it just drains the whole tank and keeps throwing water away. I do like the amount of flexibility it offers but not 100% it will last very long

Scritto da: B

Don’t like press-and-hold handle mainly

You can’t just press the handle and be on your way, like for example, on the Koehler (and others). You have to wait for water to fill the bowl but if you close the lid as is my habit you don’t get clear feedback it’s finished. I got used to it but still find it annoying. Maybe it’s just me, who knows… would have got something else had I known.

Scritto da: Anonymous

Easy to Install and Replace. However, unnecessary

Bought since previous home owner was using this for their toilets and the lever broke and some minor leak due to the paste wear. Lever broke internally and is made of plastic so no wonder there. There are no direct way that I found to replace the lever since the components are different from the standard flush brands. Seems kind of ridiculous that you have to replace the whole thing for only a lever. However, it is very easy to install and replace if you do have any issues replace in the future.

Scritto da: Trevor Bigelow

Do not waste your money

Worked great for 2 months, now the shut off value has a slow leak and the tank keeps filling with water. I have adjusted everything multiple different ways but to no avail. It is of course outside the return date so more junk for the land fill. Save your money and buy something else, its just not well made.

Scritto da: Paul

Works well

Was easy to install, works well. The handle is a little flimsy. Good way to save on water.

Scritto da: Kelly R.

I don't recommend

flush cable breaks. I don't recommend

Scritto da: Joel Tristán

Fácil de instalar si cuentas con la válvula de descarga de la misma marca

En el primer sanitario que lo quise instalar resulta que no es compatible con la válvula de descarga, así que desarmé el del segundo sanitario y por suerte es de la misma marca que éste repuesto, el resto fue seguir las instrucciones del folleto que viene adjunto.