Frigidaire 316489406 Allumeur de cuisson OEM authentique pour cuisinières

Brand:FRIGIDAIRE

3.6/5

168.60

DESCRIPTION DU PRODUIT L'allumeur de cuisson Frigidaire de haute qualité (316489406) allume le brûleur de cuisson. L'allumeur de cuisson est destiné aux fours à gaz sur les cuisinières et remplace 1615396, AH2581803, EA2581803, PS2581803. Veuillez noter qu'il est recommandé d'utiliser un équipement de sécurité et de débrancher l'appareil de tous les services publics avant tout entretien ou réparation. Veuillez vous référer à votre manuel du propriétaire pour confirmer les numéros de pièces et pour obtenir des instructions, car certaines réparations nécessitent un professionnel de service qualifié. DU FABRICANT Il s'agit d'une pièce de rechange d'origine. Le numéro de modèle et le nom de l'article suivant sont : Frigidaire (FRIGB) 316489406 Allumeur de four

Avec Frigidaire, vous pouvez être sûr de recevoir des fonctionnalités sans effort et des matériaux de qualité, vous offrant des performances de la plus haute qualité pour la durée de vie de vos appareils. L'allumeur Frigidaire Bake de haute qualité remplace 1615396, AH2581803, EA2581803, PS2581803. Frigidaire 316489406 est destiné aux fours à gaz sur les cuisinières. Frigidaire Bake Igniter allume le brûleur de cuisson. L'allumeur Frigidaire Bake est une pièce d'origine OEM (Original Equipment Manufacturer) conçue et fabriquée selon des spécifications précises.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.6 4.6 out of 5 stars 43 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎316489406
Item Package Quantity ‎1
Item Weight ‎4 ounces
Manufacturer ‎Frigidaire
Part Number ‎316489406
Product Dimensions ‎6 x 4 x 2.5 inches

3.6

8 Review
5 Star
78
4 Star
11
3 Star
6
2 Star
0
1 Star
5

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Tony C
Fixed the issue with my oven
My oven was preheating when we turned it on even though the igniter was getting hot. I replace the original igniter with this and it fixed the issue. The only thing I would recommend is to save the original one until you have this one installed in case the mount does not fit. That is the reason why I gave it four stars as the it is supposed to be a direct replacement but i did have to swap the mounting bracket.
Scritto da: seattleguy
Works for me. Took about 1 hour to replace, including moving out oven and putting back onto place.
The top oven of our double oven would not go above 100 degrees. I researched this and found that it was likely the bake igniter. I watched some youtube videos to learn how to replace it and decided to go ahead and try. It was as straight forward as I had expected. The most difficult thing for me to replace this part, for my oven (Kenmore model #790.78013002), was that it took some effort to pull the existing igniter out after removing the 2 screws that were holding it in place. This is because a) it required that I take off the back panel to undo the connection. b) Once I had the panel off and located the connection and disconnected it, it took a bit of effort to pull the wire out from inside the oven. There was some insulation in the way that I had to move over. c) i had to push the connector from the new igniter, through the back of the oven so I could connect it. Once it was connected, putting all screws back in place was easy. This new part solved the problem that I was having and now will heat up again.
Scritto da: Brian Blazevich
Fit Kenmore Elite Perfectly
I have bought cheaper versions that needed special installation. This one required no modification to shield nor wiring. Connector fit perfectly.
Scritto da: DKRemnant
As described works great, excellent shipping
As described works great, excellent shipping
Scritto da: John Galt
Absolutely perfect match!
The wires to the coupling must be cut and spliced back together. The opening in the oven chamber is not large enough for the coupling to pass through. There is a youtube video to assist with this process. Real simple but requires butt couplings or wire nuts.
Scritto da: Lisa
Perfect fit.
Cords and plugs are just right. I replaced both upper and lower igniters in the upper oven.
Scritto da: Harry Ng
Easy fix for Kenmore Elite
Easy replacement for my Kenmore Elite double oven. I didn’t have to cut any wires, simple plug!
Scritto da: Alan Wiltse
It works
The unit works just fine although I was expecting one that looked just like the picture... with a connector. It came with just bare wires and wire nuts. I cut the old ones wires above the connector so I could keep it just in case I had to replace it again with one that did have the connector on it.

Produits connexes

hot
Henny Penny 15003 Soudure Assy-Hopper
0.1/5

€ 752.86

Henny Penny 15003 Soudure Assy-Hopper
0.1/5

€ 752.86

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array