Gorilla 2 pièces époxy, ensemble de 5 minutes, seringue de 0,85 once, transparent, (lot de 2) Lot de 2

Name: Gorilla 2 pièces époxy, ensemble de 5 minutes, seringue de 0,85 once, transparent, (lot de 2) Lot de 2
Brand: Gorilla
SKU: 052427006363
Price: 35.63 EUR
Availability: InStock

Brand:Gorilla

3.6/5

€
35.63

Gorilla amène l'époxy à un nouveau niveau - le niveau Gorilla dur. Avec sa résistance supérieure aux solvants et à l'eau, l'adhésif époxy Gorilla est incroyablement solide et durable pour les réparations domestiques et automobiles. La seringue facile à utiliser maintient la résine époxy et le durcisseur séparés, de sorte qu'il est facile à distribuer et ne durcira pas avec le temps. La formule en deux parties qui comble les lacunes lie facilement l'acier, l'aluminium, le verre, le bois, la céramique, les carreaux et la plupart des plastiques. De plus, il sèche dans une finition idéale et cristalline qui rend les projets impeccables. Mode d'emploi : 1. Préparez votre zone de travail et la surface : Il est recommandé d'utiliser l'époxy Gorilla dans un endroit bien aéré. Préparer la surface : pour améliorer l'adhérence, rendre rugueuses les surfaces lisses avant de coller. Ensuite, nettoyez et séchez toutes les surfaces à coller. 2. Mélanger l'époxy Gorilla : retirer le capuchon noir. Avec la pointe pointant vers le haut, coupez ou cassez l'extrémité de la pointe des seringues. Avec la pointe toujours dirigée vers le haut, éliminez l'air et assurez une distribution uniforme en poussant lentement le piston jusqu'à ce que la résine et le durcisseur soient à la pointe. Poussez le piston pour distribuer des quantités égales de résine et de durcisseur sur une surface propre, jetable et contenue. Mélanger les deux parties pendant environ 20 secondes, jusqu'à ce que le mélange soit homogène. 3. Application : une fois le mélange terminé, appliquez l'époxy Gorilla dans les 5 minutes. Le mélange époxy continuera à s'épaissir et la force de liaison diminuera au fur et à mesure que vous attendrez pour l'appliquer. 4. Serrage : pour atteindre une force de liaison maximale, serrez le projet ensemble et ne le dérangez pas. Temps de durcissement importants : réglage : 5 minutes pour appliquer et positionner la manipulation : laisser durcir pendant 30 minutes sans être dérangé (pas de poids ni de manipulation) durcissement final : prévoir 24 heures pour le stockage du poids porteur : pour fermer, tirer légèrement le piston vers l'arrière. Essuyez l'embout avec un chiffon sec et alignez l'encoche sur l'embout et le capuchon. Fermer hermétiquement. Cliquez sur le lien Gorilla en haut de cette page pour voir d'autres produits raffinés de la société Gorilla glue.

Aucune unité disponible

EAN: 052427006363

Catégories Industriel et scientifique, Produits de nettoyage et d'entretien, Epoxies, Epoxies chargées de métal,

Seringue facile à utiliser ; des barils séparés de résine et de durcisseur empêchent l'époxy de durcir, plus la seringue distribue uniformément et comprend un capuchon pour de multiples utilisations. ensemble de 6 minutes; beaucoup de temps de repositionnement pour un ajustement parfait. Sèche clair; idéal pour une finition propre et facile. Idéal pour les réparations difficiles nécessitant une adhérence durable, un remplissage des espaces et une résistance aux solvants. Solide, permanent, rapide et comblant les lacunes ; idéal pour plusieurs applications de surface.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Gorilla
Brand	‎Gorilla
Color	‎Gorilla 4200101-2 Epoxy
Compatible Material	Aluminum,wood,ceramic,automotive,glass,steel,plastics
Compatible Material	‎Aluminum,wood,ceramic,automotive,glass,steel,plastics
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 15,977 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Full Cure Time	‎24 Hours
Included Components	‎Pack of 2
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Form	Ounce
Item Form	‎Ounce
Item model number	‎4200130
Item Package Quantity	‎1
Item Volume	‎2.1 Fluid Ounces
Item Weight	‎2.64 ounces
Manufacturer	‎Gorilla Glue
Material	ALL
Material	‎ALL
Package Information	‎Syringe
Part Number	‎4200130
Product Dimensions	‎11 x 8 x 1 inches
Size	‎2 Pack
Special Feature	Clear,Strong
Special Feature	‎Clear,Strong
Special Features	‎Clear,Strong
Warranty Description	‎1
Water Resistance Level	‎Water Resistant

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: MedicFirefighter

Works better.

This works better than the other glues and adhesives that I’ve used that have been “specifically” designed for jewelry making and crafting. Have always been thrilled with Gorilla Glue brand. Should’ve used it to start with instead of dorking around with the other stuff.

Scritto da: Haley JoAnna

Soooo strong

My kid can destroy anything and he's only 1. I used this to stick fidget spinners to a peg board and he can't pull them off at all! He keeps trying though!

Scritto da: TheEngineer

Sets Fast - Challenging to Mix Well for Large Repairs

In the bathroom, we have cultured marble countertops and a matching (vertical) surround on the jacuzzi-style tub. While removing the tub surround to do some plumbing repairs, a hairline crack formed on one end of a 6ft panel, reaching roughly 2 ft in length. Rather than replace the panel, I decided to epoxy a 3/8" plywood splint to the back of the panel, to maintain alignment of the two sides and hopefully prevent the crack from propagating further. I've used Gorilla adhesives before for woodworking projects, so I chose this epoxy product for the job. My plan was to spread a thin layer of mixed epoxy on the back surface of the panel and then lay the plywood directly on it to form the splint. So - My product-use experience: The Gorilla Epoxy package instructions call for first inverting the syringe and bleeding air out of both sides, to assure smooth flow of the two components. Makes sense. These materials are very viscous however and one side cleared faster than the other, suddenly shooting a blob of liquid out the end - It was startling and was met with a few choice words as I scrambled to clean up the tile floor. The tiny plastic mixing stick (found between the two plungers and essentially a fat toothpick) is nearly useless when you have a large area to cover and need to rapidly blend a lot of epoxy - remember that this stuff has a 5-minute set time. I smeared it around rapidly with the stick, but I doubt the result was homogeneous. When I set the plywood on top, I immediately moved it around clockwise, then counter-clockwise to better-smear/blend the two components. I then set full 1-gal paint cans on top of the plywood, as there is no easy way to clamp this together, and I gave it 24 hours to cure. The next day, there was some clear, mildly sticky bleed-out along the edges of the plywood. It looked sloppy, but that side isn't visible once the panel is installed so... Fortunately, the epoxy seems to have fused the plywood to the stone panel fairly well. I doubt that I achieved the intended 3300psi bond strength, but this panel serves a largely a cosmetic service so there's not really much load on it. I wouldn't call the process "easy-to-use", but the plywood splint looks like it's doing its job and the panel is now reinstalled. The hairline crack is barely visible, so as long as the panel doesn't move any more, we should be good. Close-enough I guess. Rating: They lose stars for the difficulty of following their instructions, but They get more stars for making a product that sticks well even when the directions aren't followed

Scritto da: M.

Mostly good.

Good epoxy. It takes over night to really harden so don't think you're done after 5 minutes. Pushing epoxy and harder out at same time is wasteful and difficult. I cut the two plungers apart and things are much more controllable.

Scritto da: Robert Yarger

Darn good

Used to set magnets into wood. Starts setting in about 5 minutes. Mixture usable for about 10 minutes. Missing a star because sets in 5 minutes means the same as "2×4" or "gross earnings before taxes."

Scritto da: ed k

strong hold

This worked great for what I bought it for. I had a little trouble pushing the plungers on both tubes as needed but other than that it was easy to mix and apply.

Scritto da: Dude

Works great

Always had good experiences with this product

Scritto da: virginia risley

Wonderful

Great product easy to use no no

Scritto da: Eric

Very little quantity!

Good overall product but very little quantity, barely enough to make a couple of repairs. And quite expensive for that little package. Also, make sure to wear latex gloves when using this because you will most likely get some on your hands or other parts. Also use a long stick. Messy stuff!

Scritto da: Jamie blancard

Works great on Ceramic

This exceeded my exceptions and more! I had shattered a ceramic Mrs Claus teddy bear ornament last Christmas and thus shattered my own heart and possibly that of my Mother’s. I gathered up the shards, determined to fix it only to have it sit on my desk for 11 months and get broken twice more. I finally ordered the glue and put my mind to getting it fixed. It’s not perfect and there are definitely some missing chunks but she is back to her old self looking as sweet as ever

Scritto da: Amazon Customer

Strong, dries clear and can be used on multiple surfaces.

I have never had to use epoxy glue before, but this is the absolute best. It dries clear and easy to use. I had to glue the spout on my China coffee spout which broke off during delivery. This glue is strong and wait for about 5 minutes, the job is done. I would be surprised if otherwise. It is also waterproof. Highly recommend it. You won't be disappointed.

Scritto da: David Horkoff

Reliable!

This did exactly what I bought it for, gluing plastic to metal. You get what you expect with this product.

Scritto da: mimi

Excellent

People wrote reviews saying its hard to put the cap on it for future use, I believe they didn't know which was the cap to close it. The black center piece you break off before using is the cap. I had no problems putting the cap on to store for later use. Very good product