Heath Zenith HZ-4192-BK Lanterne en aluminium moulé sous pression à six côtés Noir avec verre biseauté

Name: Heath Zenith HZ-4192-BK Lanterne en aluminium moulé sous pression à six côtés Noir avec verre biseauté
Brand: Heath/Zenith
SKU: 0016963841925
Price: 111.16 EUR
Availability: InStock

Brand:Heath/Zenith

3.4/5

€
111.16

DESCRIPTION DU PRODUIT Heath Zenith HZ-4192-BK Lanterne en aluminium moulé sous pression à six côtés, noir avec verre biseauté AMAZON.COM Les lumières activées par le mouvement sont pratiques et économes en énergie, mais elles peuvent être un peu encombrantes et difficiles à regarder dans le l'allée est bien, mais vous ne voudriez pas en mettre un sur votre porche. À moins que ce ne soit l'une des lumières du porche de Heath Zenith, bien sûr. Ces produits vous offrent le meilleur des deux mondes, combinant l'activation du mouvement et la conception traditionnelle d'éclairage extérieur. Le SL-4192 est une lanterne murale à six côtés qui comprend un dispositif de détection de mouvement caché qui détecte le mouvement à 180 degrés. rayon jusqu'à une distance de 30 pieds. Vous pouvez régler la minuterie d'éclairage sur une, cinq ou dix minutes, et le capteur lui-même peut être ajusté pour vous donner plus ou moins de sensibilité (afin qu'il ne s'allume pas à chaque fois qu'une voiture passe). La construction en aluminium résistant aux intempéries signifie qu'il aura également fière allure pendant un certain temps. -Activation. Une minuterie incluse vous permet de régler le mode faible luminosité pendant trois heures, six heures ou du crépuscule à l'aube (une cellule photoélectrique automatique désactive l'appareil à la lumière du jour). Vous pouvez également allumer et éteindre la lumière à volonté via la commande manuelle qui se monte sur un interrupteur intérieur existant. Si vous cherchez à économiser un peu d'argent sur l'éclairage extérieur en installant un détecteur de mouvement, c'est une excellente option qui a gagné n'ai pas l'air déplacé. Nécessite une ampoule à culot moyen jusqu'à 100 watts (non incluse). --Josh DettweilerContenu de la boîteBoîtier de la lampe, détecteur de mouvement DU FABRICANT Lanterne moulée sous pression à 6 côtés avec verre biseauté Voir plus

Aucune unité disponible

EAN: 0016963841925

Catégories Outils et amélioration de la maison, Adaptateurs, Éclairage extérieur, Lampes de patio, Lampes murales,

Aluminium moulé sous pression noir avec verre biseauté ; Dimensions : 7l x 9p x 17,3h. Capteur de mouvement caché à 180 degrés ; jusqu'à 30 pieds de portée de détection et sensibilité réglable. Éclairage à deux niveaux : lumière d'accentuation temporisée à faible niveau ou lumière de sécurité à pleine luminosité. Pour un éclairage extérieur économique et pratique. Lanterne activée par le mouvement à 6 côtés.

Assembled Height	‎17.3 inches
Assembled Length	‎9 inches
Assembled Width	‎7 inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Heath/Zenith
Brand	‎Heath/Zenith
Collection	‎Alexandria
Color	Sand Textured Black
Color	‎Sand Textured Black
Country of Origin	China
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 1,075 ratings 4.3 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish Type	Black
Finish types	‎Black
International Shipping	This item can be shipped to select countries outside of the U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	No
Is Discontinued By Manufacturer	‎No
Item model number	HZ-4192-BK
Item model number	‎HZ-4192-BK
Item Package Quantity	‎1
Item Weight	‎14.4 ounces
Light Source Type	Incandescent,Compact Fluorescent
Manufacturer	Heath Zenith
Manufacturer	‎Heath Zenith
Material	Aluminum
Material	‎Aluminum
Number of Lights	‎1
Part Number	‎HZ-4192-BK
Plug Format	‎A- US style
Product Dimensions	9 x 7 x 17.3 inches; 14.4 Ounces
Product Dimensions	‎9 x 7 x 17.3 inches
Shade Color	‎Black
Shade Material	‎Glass
Special Features	‎Adjustable
Style	‎Country - Cottage
Type of Bulb	‎Incandescent,Compact Fluorescent
Wattage	‎100 Watts
Wattage	‎100.00

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Kevinkar

Good product but switches do corrode over time

I've purchased several of these over the 20 years I've owned my home. They generally work well and, once you install and set them up, they are a "set and forget" product. Except for one thing. That one thing is that the switches they use in these lights do tend to corrode in place over time and if you ever have to change settings on them the switches are locked into place. Even when I get them un-stuck, moving them is still difficult and I've had to replace the entire unit each time that happens since they are now stuck ON all the time or not set the way I want them. They are not super cheap so replacing two at a time is more money than I really want to spend especially since the fixture still works. It's just the switches that have gone bad. This has happened several times over the years so it's not an isolated incident. I even complained to the manufacturer and they admitted this is a problem and are working on it. They sent replacements even though I was out of warranty too so they know this is a problem. It's a decent product with that one switch flaw. If they get that to be more robust it would easily be a 5 star product though I do keep buying them anyway! I recommend them but definitely want you to know you'll have to watch those switches and spray them with contact cleaner on a regular basis and move them back and forth to prevent them from locking in place.

Scritto da: Michael

Perfect

Perfect

Scritto da: Amazon Customer

Model change

Somehow the original design needed the older incandescent bulbs because it pulled current through the bulb to run but not enough to turn it on. LEDs just don't let enough through to run it well. I tried using a 100watt equivalent (15watt actual) and mostly they would work but they would also get random flickers which was annoying and ugly. Since then I've cut out the internal motion stuff and made my own controls since there are 7 of these lights together now. Even with the original wiring using the red wire it would simply make all 7 lights flicker the same way. HOWEVER, this description says these are cast aluminum and they used to be but are now a cheaper pressed sheet metal. Updated descriptions don't say cast aluminum but say 'durable metal' to sort of hide it but the last 4 from Amazon or from big box stores are all going to the new version of pressed metal. Had to find old hardware stores to pick up the last 4 that I needed that were aluminum and were made more heavy duty. This Amazon description has not been updated yet.

Scritto da: Millertime

Excellent motion detection light that works with LED lights!

I installed motion detection lights when I purchased my house in 1994 and they have failed so I needed to replace them with a reliable light that worked the same. I read the previous reports about how others have tried to use LED lights in this light where they didn't use a proper bulb. I have used a high quality dimmable LED bulbs where they work reliably in dimmable fixtures. I use the GE brand sold at Target and other various stores. The footprint of the light is large where I had to chisel a significant larger area on the rock facia where it was mounted on. Stripped the wires back about an inch to provide a solid connection with the wire nuts. I can't stress enough to purchase a high quality dimmable LED bulbs to use where the cheap ones can cause the failure of the circuitry and disable the functionality of the light. The standard settings for the motion detection is too sensitive where anyone who moves around 30 feet away triggers the sensor and illuminates all the lights for about 90 seconds. I really want it to trigger when movement is detected around 12 feet in a perimeter that I have set.

Scritto da: Bermuda Shorts

Great if you use a modified installation

After reading the reviews and examining the product, I realized that installing it using the supplied hardware wouldn't cut it. In order to fit the mounting bracket to my existing recessed single-gang electric box, I had to grind a small amount off the ends of the mounting bracket. For a flush-mount box, this won't be necessary. #6-32 screws are used to attach the mounting bracket to the wall box. I re-tapped the holes in the section of the mounting bracket for the long bolts, which attach to the body of the lantern, to #8-32 and replaced the original lantern mounting bolts with stainless steel #8-32 bolts. I used #8-32 brass knurled nuts to secure the lantern body to the bracket. The holes in the mounting bracket don't line up perfectly with the pass-throughs in the aluminum lantern body. This would make fitting the mounting bolts through the body very difficult while propped-up on a ladder. I carefully adjusted the bends in the mounting bracket to lengthen it until the holes lined-up. I drilled out the pass-through holes in the lantern body to accept the #8-32 bolts. Do not use LED or compact fluorescent bulbs. Using vintage-style incandescent bulbs, in the DualBrite mode, the lantern emits a beautiful glow and then switches to a bright light when triggered by movement in front of the lantern for the period of time you selected.