Hopkins 43105 Kit de câblage de véhicule simple enfichable

Name: Hopkins 43105 Kit de câblage de véhicule simple enfichable
Brand: ‎Hopkins Towing Solutions
SKU: 0079976431057
Price: 62.08 EUR
Availability: InStock

Brand:‎Hopkins Towing Solutions

3.6/5

€
62.08

En tant que marque numéro un des produits électriques de remorquage, Hopkins Towing Solutions offre aux consommateurs innovation, durabilité et performance depuis plus de vingt ans. Avec les connecteurs en T de Hopkins, vous n'aurez pas à couper dans le système de câblage de votre véhicule. C'est plus rapide et plus facile que de couper et d'épisser et cela gardera intacte l'intégrité du système de câblage de votre véhicule.

Montant

Ajouter au panier Acheter maintenant

EAN: 0079976431057

Catégories Automobile, Accessoires extérieurs, Produits de remorquage et treuils, Accrochements Accessoires, Câblage,

Pas de coupe, de soudure ou de ruban adhésif. Installation simple en 4 étapes faciles. Le système en deux parties permet une installation plus polyvalente ainsi qu'une simple option de remplacement de la prise si l'unité est endommagée. Précâblé pour fournir un virage à droite, un virage à gauche, un feu arrière et sur certains modèles, la fonction de sauvegarde. Les connecteurs en T vous permettent de connecter le système de câblage de votre remorque au système de câblage de votre véhicule.

Brand	‎Hopkins Towing Solutions
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 287 ratings 4.6 out of 5 stars
Exterior	‎Smooth
Is Discontinued By Manufacturer	‎No
Item model number	‎43105
Item Weight	‎7.2 ounces
Manufacturer	‎Hopkins Towing Solution
Manufacturer Part Number	‎43105
OEM Part Number	‎43105
Product Dimensions	‎8.88 x 3.88 x 1.88 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: chkywuky

Light adp

Expensive

Scritto da: brian larson

Fit my Tacoma perfectly

It only took a few minutes to install.

Scritto da: Melissa Robinson

Works perfectly

Was a pleasure using this product fit exactly as expected and came with all mounting hardware great product and great company only wish it had some propaganda for my truck window

Scritto da: Steve

fits my 96 Honda

easy to connect

Scritto da: dig

no good installation instructions

I installed this product on a 04 Honda Element and it will need an extension to reach over the tail gate to a trailer. you will need to remove the right rear seat and unbolt the seat bracket. ( 3 bolts ) you also need to take the seat belt bolt out. take out the screws that hold the interior out and pop off the piece by the seat belt, rear strut plus a corner piece that would be behind the seat. I pried up the molding at the bottom of the door just enough to get the side piece clear. slowly and carefully work you way back from the side door to the rear, if things don't move you might have missed a screw. once the side piece is loose the plug is to the rear and lay the wire under the side piece into the spare tire well. Make sure the doors weatherstrip is on the outside of the plastic when you put it back together. Take your time and don't use too much force.

Scritto da: S. Vaden

Hopkins trailer taillight converter 43105

These adapters convert the five wire taillights of your car to four wire taillights of the trailer. The circuit is actually kind of complicated, but it is sealed inside the housing so it cannot get wet. The only problems I had installing this on the CRV were not related to the harness itself. You have to remove the inner plastic panel on the driver's side to get to the taillight connector, then you have to enlarge the hole in the bottom of the inner fender so that the taillight converter connector can fit through. I used a Unibit drill bit to enlarge the hole, and found a rubber grommet to fit so that it would not wear through the wires. The converter housing can be attached under the car with supplied tie wraps. These days ROHS requires the elimination of lead in connector platings. The plating used on the bullet connectors soon develops a white oxidation that makes it hard to plug the connectors together. The tin/lead platings were much better because they supplied some built-in lubrication. One step forward for mankind, two steps back. SV

Scritto da: Jesus O.

Good product

Facil de installed

Scritto da: crystal

Perfect for non led set up

Works as it should. However if you are running leds this is not the module you want to use. The module back feeds a little which will cause a led to light up when it shouldn’t where as a regular bulb won’t.

Scritto da: working class drone

Fits 2003-2004 honda element

fits perfectly into factory honda wiring harness. no cutting wires / splicing etc. hooked up the trailer and all the lights work flawlessly. i have read this does NOT fit the 2005+ honda element

Scritto da: Tanner

100% recommend!!!

Works as described, comes as described, plug n play

Scritto da: Vincent

Perfect!

Did wath is supose to. Perfect!