InterDesign Porte-savon mural en plastique à ventouse auto-drainante pour évier de cuisine - 2,5 x 3,5 x 6, transparent 1

Brand:iDesign

3.2/5

24.91

Gardez votre savon à portée de main avec le porte-savon à ventouse iDesign ! Le porte-savon pour douche est parfait pour une utilisation dans votre évier de cuisine, votre cabine de douche ou votre baignoire. Cet économiseur de savon est fabriqué en plastique transparent et durable pour fournir des années d'utilisation de qualité. Le porte-savon pour douche est conçu avec une ouverture unique pour permettre un drainage facile de l'eau pour garder le savon au sec et prolonger sa durée de vie. La ventouse fournit une aspiration sur les surfaces lisses non poreuses telles que les carreaux, le verre, la fibre de verre et certains métaux. Ce porte-savon pour évier de cuisine contient des barres de savon, des éponges et des gommages dans la cuisine, la salle de bain principale, la salle de bain des invités et la salle de bain des enfants. Le porte-savon de salle de bain mesure 2,5 x 3,5 x 6, parfait pour votre maison. Avec iDesign, vous pouvez vivre simplement tous les jours.

Aucune unité disponible
TAILLE IDÉALE - Mesurant 2,5 x 3,5 x 6, le porte-savon en barre est idéal pour ajouter un accès facile au savon en barre dans votre évier de cuisine, votre cabine de douche ou votre baignoire. Durable et élégant – Fabriqué en plastique transparent durable, le porte-savon de douche est conçu pour des années d'utilisation de qualité ; la conception transparente vous permet de visualiser facilement le contenu en un coup d'œil. VIDANGE FACILE - Ce porte-savon à suspendre au mur est votre solution pour garder les pains de savon au sec et prolonger leur durée de vie; le porte-savon de cuisine dispose d'une ouverture unique qui permet un drainage facile. VENTOUSE FORTE - Ayez toujours votre savon à portée de main; ce plateau d'évier de cuisine est doté d'une ventouse qui se fixe à toute surface lisse non poreuse, comme les carreaux, le verre, la fibre de verre et certains métaux. PORTE-SAVON - Le porte-savon à ventouse pour évier de cuisine iDesign est idéal pour une utilisation dans la cuisine, la salle de bain principale, la salle de bain d'invités, la salle de bain des enfants, les douches ou les baignoires ; ce porte-savon auto-videur contient des pains de savon, des éponges et des gommages.
Brand iDesign
Color Clear
Country of Origin China
Customer Reviews 4.1 4.1 out of 5 stars 1,440 ratings 4.1 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item model number 24400
Item Weight 0.1 Pounds
Item Weight 1.6 ounces
Manufacturer iDesign
Material Plastic
Mounting Type Wall Mount
Number of Pieces 1
Product Dimensions 2.5 x 6 x 3.56 inches
Product Dimensions 6"L x 3.5"W
Shape Cup
Special Feature Durable

3.2

8 Review
5 Star
64
4 Star
12
3 Star
9
2 Star
4
1 Star
11

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Brian D
Great Long-lasting Soap Holder
This soap holder lasted 10 years of daily use! Never had an issue with suction and it holds the soap well.
Scritto da: Steve
Get what you pay for.
Suction cup does not hold up very long.
Scritto da: B. Thompson
Streamlined soap dish
Like the design, bought three for all the sinks in my house, two of the suction cups aren’t doing a great job.
Scritto da: Mad Master
This simple holder can save a lot of money for users of expensive bar soaps
I got this soap holder to protect my expensive soap from unnecessary moisture from the shower head. I use Grandpa's Pine Tar Soap, and at 4 dollars a bar, I knew I need protection for it. In the past I left bar soap in the built in tub caddy, this resulted in the bar of soap getting blasted with water spray and becoming soft and dissolving away after only a few uses, leaving a mess of soap scum and residue. After that I tried storing it inside a plastic box, however the cracks between the lid and the bottom allowed water to leak in. This form a pool of soap destroying water inside the box. These issues caused me to stop using bar soap for years. After learning about the harsh chemicals and xenoestrogens in the shower gel I was using, I switched to back to bar soap. I was still left with the problem of protecting my soap from unwanted water. After thinking about it for a minute, I knew I needed a holder that kept the soap as far away from the water as possible. This was perfect. The holster has strong suction cup that you can slap onto any wall. When you are done lathering, you can put the soap safely out the way while you rinse. You can easily hang multiples of these so that everyone can have separate bars of soap. You'll want to mark these if everyone is using the same kind of soap. As the soap gets smaller, there is a small chance it might slip out through the gap in the middle, which is there to drain any water that gets inside. There is a small nub of rubber sticking out from the suction cup for easy removal. The holder itself is wide and deep, easily capable of holding a very large bar. All of the soap residue is contain within the holder for easy cleanup. This holster has extended the life span of my soap considerably, and I couldn't be more pleased. For the price of one bar of soap, you can save yourself from wasting dozens.
Scritto da: Amazon Customer
decent
suction is okay, fell down a couple times.
Scritto da: AC
Best soap holder ever
If you still use bar soap and don’t like for it to sit in a puddle of water this IS THE ANSWER!! I found this type of product about a decade ago and I’ve searched for years to find more. Once I found this one I ordered several more. I’m certain the few extras I bought will last me the rest of my life unless I give them away LOL!!! It easy to keep clean and keeps the soap clean and dry.
Scritto da: Paul
Warped suction cup----does NOT stay On
the plastic is nice and clear----but the Suction cup is FLAT.....NO dome shape... it does not stay on for more than 2 minutes...useless...
Scritto da: THM
It Does the Job
The surface you're attaching these to needs to be completely flat, and very clean. Make sure to clean the surface, and the suction cup with rubbing alcohol and allow to dry. Use distilled, or reverse osmosis treated water to wet the surface prior to attaching. I have 5 of these and they will rarely fall off the surface they're attached to. Keeps soap dry between uses and extends the life of the bar.

Produits connexes

hot

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array