0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

iPower Ventilateur en ligne 8 pouces 500 CFM avec contrôleur de vitesse Filtre à air à charbon Conduit de 25 pieds et moniteur d'humidité de la température pour la ventilation de la tente de culture, kits de ventilation noirs 8 pouces, 25 pieds

Brand:iPower

3.5/5

€
641.82

Ventilateur en ligne iPower 8 pouces 500 CFM avec contrôleur de vitesse, filtre à charbon et conduit de 25 pieds et moniteur d'humidité de la température pour la ventilation de la tente de culture

Aucune unité disponible

EAN: 0810000171552

Catégories Outils et amélioration de la maison, Racing Wheels, HVAC, Commandes CVC,

Multifonctionnel : ce combo de ventilation élimine la chaleur et élimine les mauvaises odeurs indésirables dans la tente de culture pour résoudre les problèmes de distribution d'air sans remaniement majeur du système ni frais. Contrôleur de vitesse du ventilateur : vitesse variable, OFF, HIGH, MED, LOW. Pour éviter le risque de griller le moteur du ventilateur, le contrôleur ne s'ajuste PAS en dessous de 50 %. Pré-filtre GRATUIT inclus : Nous vous recommandons de remplacer le pré-filtre tous les 6 mois pour protéger votre filtre. Conduit en aluminium non isolé de 20,3 cm et 7,6 m + 2 colliers de serrage en acier inoxydable : revêtement ignifuge et hélice en fil résistant à la corrosion ; Plage d'endurance de température de 0 à 185 °F. (-18℃ ~ 85℃). Filtre de 20,3 cm : dimensions : 8 conduits à bride x 20 longueur ; Flasque réversible. Pré-filtre GRATUIT inclus : Nous vous recommandons de remplacer le pré-filtre tous les 6 mois pour protéger votre filtre. Ventilateur en ligne de 20,3 cm 500 CFM : pales de ventilateur composites et moyeu central qui réduit le bruit et les vibrations.
Customer Reviews 4.5 4.5 out of 5 stars 771 ratings 4.5 out of 5 stars
Item model number 8 Inch 500 CFM Inline fan with Speed
Item Weight 33.9 pounds
Manufacturer iPower
Product Dimensions 23 x 22 x 13.5 inches

3.5

13 Review
5 Star
73
4 Star
15
3 Star
4
2 Star
3
1 Star
5

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: William & Alicia
As expected
My only complaints are that mine didn't come with the temp/humidity monitor and that the fan didn't connect to the filter without using tape to secure it.
Scritto da: Rickey Black III
Works great!
Great fan a little loud
Scritto da: JohnB
Quiet fan and adjustable and accessible to clean
Exactly what I was looking for. Use it for venting fumes for my welder. Have a shower run to the wall and vent out through a 4” drainage pipe with a dryer vent cover on the outside. Can be taken apart and cleaned. Been using it for about Week. We’ll see how it lasts. Can’t beat the price.
Scritto da: techguy
Works great
I have it hooked up to my laser and it works great to handle the smoke
Scritto da: Howard D. Johnson
Not 190 cfm
The output of this unit.os not 190 cfm but 165 cfm measured with an air velocity measuring instrument purchased from Amazon.
Scritto da: Jayson Myers
Excellent 6" Fan for a 5x5x6.5 grow tent.
Tech stats in case anyone was curious... It draws 44.5 watts at it's lowest possible setting, 46.5 watts in the middle of the MEDIUM setting, 54.5 watts in the middle of it's HIGH setting, and 60.5 watts at MAXIMUM. Supposedly this model is rated at 350CFM...yet when I tested it with my digital Anemometer, that highest number I saw was 260CFM, with no ducting attached, about 6" from the outlet side of the fan. Once you attach a filter and ducting, even with minor bends, I'm sure that number will be reduced even further...BUT...read below..and you'll see how "real world" numbers, not manufacturers "blown out of proportion" numbers defer. Set on MAX 260CFM, MEDIUM 210CFM, and LOWEST setting was 180CFM Now on to the quality stats... The ducting that it comes with as of 12/2020 is the cheapest junk you can buy at Lowes, the fan however far exceeded my expectations. I have a 5x5x 6.5 grow tent, on it's lowest setting(180CFM), using it as SUPPLY AIR, with PVC ducting and (3) short 90° bends...it moves SOOO MUCH air that it is a windy inside the tent and inflates my tent like a balloon and I have to open up the other ports or the door to release the air...I don't think I'll ever need to use any of the other settings, the lowest(180CFM) is PLENTY!
Scritto da: Robert B.
Design Flaw. Very difficult to attach due to unit body width extending beyond brace screw holes
First, this is heavy (metal) and the directions say to affix to masonry/concrete and you will need to do so. The brace / platform at the bottom is too narrow to support the body so attaching it to something is required. Since it has to sit on the floor due to weight it is not my idea of in-line for ducts. So here are the additional purchases I had to make to install this fan because of the design flaw: 1. A stone to affix the fan. 2. Additional duct work 3. Masonry screws (with drill bit included) 4. An 's-shaped' screwdriver short enough to fit between the body of the fan to fasten the screw into the stone. A stubby screwdriver is way too tall, as is any type of adapter for an impact driver. You have maybe an inch from the screw to the body. It is going to be time consuming to screw it in so do this before you go under the house or other area where space or light is an issue. Of course, you will also need a drill in order to drill the holes in the stone or concrete. Additionally, I bought a screwdriver set which attaches to a socket which I thought would work but it was also too tall and could not be used. But I have other uses for this socket-screwdriver tool which I did not know existed. As for the fan itself, it seems to work fine. As I already mentioned, it is heavier than expected. If they had made the fan so you could screw in the screws or made the brace wide enough to support the fan, then I would have given this a much higher rating. A lot of hassle and time to set this up and I wish I would have bought a lighter plastic fan.
Scritto da: MacGyver
Quiet and moves a lot of air.
I bought two of these, one to pull air out of my greenhouse into my house, and one to put air into the greenhouse from my house. This helps regulate the temperature of my greenhouse in the winter. I bought two and one of the fins of one of the fans was broken. It was replaced and the units I have working are great!
Scritto da: Ivor Biggum
Noisy setup
I realize that a fan has to be noisy to blow at these speeds, so I can't be totally unfair. The carbon filter is solid and only a bit of loose charcoal dust inside the chamber. Fan is way less noisy when all is assembled, but I wish the ducting was more insulated for sound. I'll try DIY methods for sound dampening. Other than that, it all does what it's supposed to, but its a bit overpriced for what you get.
Scritto da: trung
Charcoal everywhere
I’m disappointed that I purchased this brand. The 350cfm fan worked fine but the filter had so much charcoal debris inside of it the moment I pulled it out of its plastic bag. It was spilling out everywhere. I tried emptying out as much as I could before putting the white skirt on it to give it a test run. Connected the fan and turned it on for about 5mins, It just ended up filling my dinning room with fine black dust all over the place. This is a health hazard. There’s no way that this is how it’s suppose to work.
Scritto da: Lady Herbalwise
Works like a Champ
Very happy with this ventilation fan kit! Works great, and after running for months now its just as quiet as it was on day one :). Great value for price point.
Scritto da: Terry Trowbridge
Not sure what it is supposed to look like when complete
The fallback, of course, is that you might want a Halloween costume at an HVAC themed party. But gosh, these components are bigger than you might have thought, anyways.
Scritto da: Ken M
Know what size you need before buying.
So, I used this unit in my grow tent. I purchased one a little bigger than I needed for expansion later, its in a 2.3x2.3 grow tent and it rocks. Will buy this monster again if needed. Works exactly as it should. Eliminates all unwanted smells in my man cave grow tent. Very solid, quiet, powerful, and looks great.

Produits connexes

hot
Johnson Controls P170MA-1C Contrôle de pression double, SPST
0/5

€ 343.35

Johnson Controls P170MA-1C Contrôle de pression double, SPST
0/5

€ 343.35

hot
Puits d'immersion Johnson Controls WEL11A-601R, 1/2 NPT
4.1/5

€ 88.86

Puits d'immersion Johnson Controls WEL11A-601R, 1/2 NPT
4.1/5

€ 88.86

hot
MiracleLED 604716 Lumière de porte de garage pour service difficile (lot de 2) 2 pièces (lot de 1) Ampoule 5 W
3.5/5

€ 40.58

MiracleLED 604716 Lumière de porte de garage pour service difficile (lot de 2) 2 pièces (lot de 1) Ampoule 5 W
3.5/5

€ 40.58

hot
Tjernlund SWT Switch It Thermostat sans fil pour ventilateurs de transfert AireShare et autres ventilateurs
1.9/5

€ 203.35

Tjernlund SWT Switch It Thermostat sans fil pour ventilateurs de transfert AireShare et autres ventilateurs
1.9/5

€ 203.35

hot
Middleby (MIDDH) Kit motoréducteur universel, noir
4.1/5

€ 333.68

Middleby (MIDDH) Kit motoréducteur universel, noir
4.1/5

€ 333.68

hot
Johnson Controls A350AA-2C Contrôle de température série A350 avec capteurs de température, plage de température de 90 à 250 degrés F, différentiel réglable de 1 à 30 degrés F
4.1/5

€ 340.56

Johnson Controls A350AA-2C Contrôle de température série A350 avec capteurs de température, plage de température de 90 à 250 degrés F, différentiel réglable de 1 à 30 degrés F
4.1/5

€ 340.56

hot
Nu-Calgon 4216-27 (25 pi x 3/8 po) Cordons d'étanchéité et de calfeutrage Blanc
3.7/5

€ 54.34

Nu-Calgon 4216-27 (25 pi x 3/8 po) Cordons d'étanchéité et de calfeutrage Blanc
3.7/5

€ 54.34

hot
Johnson Controls P100AP-4C Pressostat, ouvert à 170
4.1/5

€ 58.02

Johnson Controls P100AP-4C Pressostat, ouvert à 170
4.1/5

€ 58.02

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu