Irwin Industrial Tools 3046012 Foret à alimentation automatique 3-1/4"

Brand:Irwin Tools

3.6/5

€
63.00

DESCRIPTION DU PRODUIT 2-1/4 de diamètre, mèche à bois à alimentation automatique Speedbor max, 3 fois la zone de coupe et les bords des mèches à alimentation automatique standard, la tige à percussion hexagonale à changement rapide 7/16 s'adapte aux perceuses 1/2 ou plus, convient également à 7/ 16 forets à clé à chocs hexagonaux, pour percer des trous de grand diamètre dans le bois, pas de vis agressif, la tige fraisée avec précision élimine le faux-rond et l'oscillation, forgé en 1 pièce à partir d'acier à haute teneur en carbone pour une résistance maximale dans des conditions de perçage difficiles, idéal pour les systèmes de tuyaux et de conduits, Cardé. DU FABRICANT Irwin Industrial Tools 3046012 Embout à alimentation automatique à 3 couteaux de 2-1/4 pouces. Pour des trous rapides, rugueux ou propres et précis, la vaste gamme de forets à bois d'Irwin offre à l'utilisateur les meilleurs outils disponibles pour chaque application dans la réalisation de ses besoins de perçage du bois.

Montant

Ajouter au panier Acheter maintenant

EAN: 0024721104779

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Pièces et accessoires pour perceuses, Auto-alimentation 13832, Mèches Forets,

Pays d'origine : Chine. Quantité : 1. Type de produit : mèches. Dimensions du colis : 17,78 cm (L) x 10,414 cm (l) x 17,78 cm (H).

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Irwin Tools
Customer Reviews	4.6 4.6 out of 5 stars 52 ratings 4.6 out of 5 stars
Item Dimensions LxWxH	3 x 8 x 4 inches
Item model number	‎3046012
Item Package Quantity	‎1
Item Weight	‎10.1 ounces
Manufacturer	‎IRWIN
Material	Alloy Steel
Material	‎Alloy Steel
Part Number	‎3046012
Product Dimensions	‎3 x 8 x 4 inches
Shank Type	Hex
Surface Recommendation	Wood

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Charles Frazier

SUPER CUTTERS

PLUMBING

Scritto da: David Madsen

Works great

This drill worked great, I had to buy a new and bigger drill to use it. This bit requires a lot of torque, not speed. We used it to drill a 24 inch hole in a carved tree stump. After burning up 2 household drills, we bought a drill that provided high torque and a moderate speed. With that configuration it only took about 10 minutes to get the job done.

Scritto da: Andrew-Joe

Aggressive yet effective

Used this with an old drill press to drill 2 1/4" wide holes for candle votives for our wedding center pieces. The self tapping screw is extremely aggressive at first so be ready. It grips the wood and pulls itself in (or your log upward) with a force that is hard to control. Once the cutting blades make contact, this thing cuts like butter. You will definitely need an air hose or shop vac to clear your sawdust and wood scrapings, especially if drilling vertically. After 40 holes at a depth of 2 1/2", the bit was still as sharp as it came in the box.

Scritto da: NCHiker

Great Bit For Candle Holders

I purchased this bit to make candle holders for a wedding decoration. The type of wood made a big difference in how easily the bit cut through the wood. Overall, the bit worked great and the candles received a lot of compliments! I used these candle holders: Eastland® Votive Holders Clear Set of 72 And the Candles (I averaged a 7-8 hour burn time): Richland Votive Candles White Unscented 10 Hour Burn Set of 72 All three products worked great!

Scritto da: Joseph grasso

Cuts through three 2x8 inch wood beams like butter

Bought this 2-1/4 inch bit to install a central vacuum line in my house.because of the amount of wood being removed i thought it would bog down. Drilling overhead and down holes it didn't bog,nice clean cuts.also comes with a replaceable worm screw.the worm screw pulls it through the wood.works on 1/2 drive chuck drills straight or right angle.

Scritto da: Shawn

It's a beast

Well, with the speed screws in the center its ridiculously aggressive. If you're plowing through lumber I'm sure speed would be desirable, but for drilling a nice smooth hole into a hardwood project, not so good. Yes, you can remove the speed screw, but it leaves 1/4" dowel in the center that bottoms out before drilling through 3/4"...

Scritto da: Chris S.

Almost too powerful, do not drill towards the sun for fear of creating a black hole

If you need to run a lot of drain pipes, and you need holes in the wood to run said drain pipe - buy this thing, or as I call it "the beast". It will rip through wood like Putin through the tears of babies. My tiny non-Putin sized boy-man arms could barely stand the power as it left behind chunks of wood, piles of sawdust, and my Olympic weight lifting hopes and dreams.

Scritto da: Jessica Parker

perfect

great quality better than I expected

Scritto da: Armando GR

Rudas,

trabajan excelente. no dejan los cortes muy finos, pero si lo que necesitas es perforar, son perfectas. Aclaro, no son para taladros portátiles, a menos que tengas un dewalt dcd996 o algo así enorme, no la compres. son para taladro de bando, los pequeño se atascan y calientan enseguida. Inclusive si usas el dcd996, que sea con bateria de 5 ampers, por que de 3amp para abajo se queman las baterías. En sí, una excelente pieza.