IRWIN Tools 3018004 Jeu de forets à index métallique en oxyde noir, 29pc Pro Case 29pc Pro Case Black Oxide

Brand:Irwin Tools

3.7/5

€
150.80

DESCRIPTION DU PRODUIT Cet ensemble de 29 forets à index en métal à oxyde noir IRWIN comprend des forets avec un traitement à l'oxyde résistant à la corrosion qui aide à prévenir la rouille. Chaque foret a une pointe fendue à 135° qui démarre au contact et coupe avec moins de force. Une tige réduite au-dessus de 3/8 de pouce permet l'utilisation de forets plus gros dans un mandrin de 3/8 de pouce. Cet ensemble de forets IRWIN est livré dans un boîtier en caoutchouc surmoulé pour une protection en cas de chute et comprend un tableau de sélection Tap & Drill pour une référence pratique. AMAZON.COM L'ensemble de forets à oxyde noir industriel Irwin de 29 pièces est une collection pratique et polyvalente qui comprend des forets avec des pointes à pointe fendue à 135 degrés spécialement conçues pour vous permettre de percer efficacement au contact et avec moins de force. La tige réduite au-dessus de 3/8" vous permet d'utiliser les forets plus grands dans un mandrin de 3/8", tandis que les tiges plates au-dessus de 11/64" éliminent le glissement dans le mandrin. Cet ensemble est livré avec une indexation automatique pour un foret facile. d'accès et d'identification, un tableau de sélection de tarauds et de forets pour une référence rapide et un étui pratique en caoutchouc surmoulé pour transporter tous les embouts et protéger l'ensemble. Les 29 forets présentent un traitement à l'oxyde noir qui résiste à la rouille et à la corrosion, et leur taille varie de 1/16" à 1/2" par incréments de 1/64". Contenu de la boîte29 forets : 1/16 - des embouts de 1/2 pouce à 1/2 pouce par incréments de 1/64 pouce et un boîtier surmoulé en caoutchouc qui protège le kit en cas de chute. DU FABRICANT Irwin Industrial Tools 3018004 Coffret industriel de 29 forets, oxyde noir. Irwin propose une gamme complète de forets hélicoïdaux pour métaux, y compris des forets en oxyde noir, Turbo Point, en nitrure de titane et en cobalt. Voir plus

Montant

Ajouter au panier Acheter maintenant

EAN: 0031113081051

Catégories Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Pièces et accessoires pour perceuses, Mèches à torsion, Mèches Forets, Mèches Jobber,

Tableau de sélection Tap & Drill pour une référence pratique. L'étui en caoutchouc surmoulé protège le kit en cas de chute. La tige réduite au-dessus de 3/8" permet l'utilisation de forets plus gros dans un mandrin de 3/8". Chaque foret est doté d'une pointe à pointe fendue à 135° qui démarre au contact et coupe avec moins de force. Ces forets IRWIN ont un traitement à l'oxyde pour résister à la corrosion et aider à prévenir la rouille. Tableau de sélection Tap & Drill pour une référence pratique. L'étui en caoutchouc surmoulé protège le kit en cas de chute. La tige réduite au-dessus de 3/8" permet l'utilisation de forets plus gros dans un mandrin de 3/8". Chaque foret est doté d'une pointe à pointe fendue à 135° qui démarre au contact et coupe avec moins de force. Ces forets IRWIN ont un traitement à l'oxyde pour résister à la corrosion et aider à prévenir la rouille.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Irwin Tools
Brand	‎Irwin Tools
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 589 ratings 4.6 out of 5 stars
Cutting Angle String	135 Degrees
Cutting Angle String	‎135 Degrees
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Titanium Nitride
Finish Type	Titanium Nitride
Finish Type	‎Titanium Nitride
Included Components	‎Bare-Tool
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎11.25 x 7.13 x 3.75 inches
Item model number	‎3018004
Item Package Quantity	‎29
Item Weight	‎5 ounces
Manufacturer	‎IRWIN
Material	Titanium Nitride Coated
Material	‎Titanium Nitride Coated
Part Number	‎3018004
Product Dimensions	‎11.25 x 7.13 x 3.75 inches
Shank Type	Straight
Shank Type	‎Straight
Size	‎29pc Pro Case
Style	‎Black Oxide
Surface Recommendation	‎Aluminum,Brass,Metal,Stainless Steel,Steel,Wood
Tool Flute Type	‎Spiral
Warranty Description	‎Manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Amazon Customer

Hole in one.

The drills are great but the case is a different story. As for the drills, I own a semi truck and most other drills heat up and snap but Irwin do a much much better job. I have drilled through some very hard materials. The case is difficult to open and even worse to close. The metal sounds like a nice idea but a hard plastic vase with a easy open and close lid would be much better. Don’t let the case sway you.

Scritto da: QUARTERBACK

Great product

Very high quality very sharp point will drill very fast with little effect very easy to use very happy with this set.

Scritto da: Jeff Geerling

Awesome for the convenience, but not the best drill bits

I've owned and used an excellent set of Irwin drill bits for a few years, and love how well they work. However, the "loosen the chuck, pull out one bit, tighten the chuck on a new bit" routine gets old when you're doing a lot of drilling and driving, and the smaller bits can be tough to get seated properly in my drill because of the tiny diameter of the shank. I've had my eye on a few different hex shank drill bit sets, and this one in particular seemed to be simple and well built (two traits I like in my tools). The bits are well made and precise, and the quick change chuck works pretty well with these bits, as well as standard magnetic screw bits from a separate kit. I can change bits with one hand, but it's slightly quicker to use two hands. It beats the loosen/tighten rigmarole, hands down! To release a bit, just pull down on the sleeve, and the bit pops up, ready to be removed (it doesn't fall out, either, which is nice). Push in the new bit until it locks into place, and you're set to drill again! The included case is nice, too, since I hate losing a bit or trying to read the tiny text on the bit to figure out the size; I find that if I have a case like this, where every bit has a slot, I'm much less likely to have a bit go missing during cleanup, because I immediately notice an empty slot when closing the case. The only downside to using the quick-change connector is that the bits don't seem to spin perfectly centered/balanced when in the connector, due to an ever-so-slightly loose connection. It doesn't cause much of a problem in normal use, but I like having my drill bits spin perfectly straight, with no wobble. That one downside is more than made up for by the price of this drill bit set, and the convenience of not having to loosen and tighten my drill's chuck many times during smaller projects. [Update 2/9/12: I used the 7/32" bit for drilling through metal (I was drilling slowly to prevent overheating, but even at that speed, the tip was getting hot), and the bit simply started spinning in its hex shank. It looks like the bits are simple drill bits with a little flute on one end, and the hex shanks aren't secured to the bits very well. None of the other bits have had this problem yet, but it makes me more cautious about pushing the bits too hard... The bit still works perfectly *without* the hex shank, but that completely negates the convenience. I'll post back if any of the other bits exhibit this problem. I've taken off one star because of this issue. (See my added picture above.)]

Scritto da: Big Len 5

Good drill bits for the price

I have always had good luck with Irwin products. However, they have become difficult to find in my area as of late. I was happy to find this set of the most common sizes. I drilled 55 steel rivets with the 3/16" bit and at this point, it will need replacement. I did drill 1/4" thick aluminum with the 5/32" bit and it worked fine. This is a good set of drills for moderate use on metal, just as I had intended.

Scritto da: Steve

Best bits in my box!

I’ve owned and operated many hydraulic shops in my life, these Irwin drill bits have saved me many times. Great drill bits. Everyone needs these as go-to bits in their tool box.

Scritto da: stanley Bratt

Good quality precision drill bits

I have used IRWIN drill bits for years along with other brands, I like these better for quality and cost. highly recommended

Scritto da: Joe Kirkpatrick

Good product!

I have used Irwin bits for years. They are not the best I have used, but very good. One thing most people don't do is use pipe cutting oil on the tip of a drill bit when drilling in metal. If you do that, your drill bits will last 2-3 longer than without doing it.

Scritto da: ricardo hernandez

Great quality

This is my second set. Great product

Scritto da: haidi

Five Stars

Eccelent buy, thank you.H.

Scritto da: IGNACIO MORALES

Excelentes herramientas

Vienen en una caja de plástico fuerte con bisagra metálica. Se ven piezas bien construidas y tienen buen filo. El vástago de cambio rápido es también una buena pieza. Para mi me sirve en especial para uso con un desarmador eléctrico. Me gustó la presentación y facilidad de uso.

Scritto da: Carl Kupke

Son buenas pero...

Parecen de buena calidad. Me las recomendó un conocido, pero una se rompió al taladrar concreto, para colgar una repisa...! He usado otros tamaños sin problema y perforan de forma decente.

Scritto da: Gary Forkes

Irwin drill bit. Unacceptable due to run out (wobble).

I would have expected better from Irwin. The drill bits do not run true. The run out on 3/32" bit is 3/64". This bit wobbles very badly in either my hand held drill or in my drill press. Please see the attached video. This bit is one of a set of 11. All of the bits have this run out problem. Oddly a purchase a separate 1/4" bit and it works just fine. Now I have to contact Amazon about getting a replacement

Scritto da: Kabo

Nice

Incredible three day shipping. Irwin always a good tool buy. I'm sure will last for years. Competition equivalent hex sets $60. Great buy