Kenney KN607C/10V1 Tringle à rideau de douche à tension tendance Blanc 24 à 40 pouces Blanc 24 à 40 pouces

Brand:Kenney

3.1/5

35.01

La tringle à rideau de douche Kenney Twist & Fit No Tools Stall Tension est réglable de 24 pouces à 40 pouces de large, ce qui en fait une excellente solution pour les douches compactes, debout ou de cabine. Fabriqué en acier robuste, il est conçu pour être à la fois durable et résistant à la rouille. Les couleurs et les finitions à la mode facilitent la recherche d'anneaux et de rideaux de douche assortis au reste de votre salle de bain. Les embouts antidérapants et anti-rayures n'endommagent pas votre mur ou votre carrelage. Les embouts comprennent des anneaux de verrouillage pour maintenir votre rideau de douche contre le mur, évitant ainsi les courants d'air. Twist and Fit facilite l'installation - sans avoir besoin d'outils. Pour installer, étendre contre les deux murs et tourner pour fixer en place.

Aucun outil n'est nécessaire pour l'installation, ce qui rend cette tige facile à installer : aucun outil, aucun perçage, aucun dommage. Les embouts antidérapants et anti-rayures aident à protéger votre mur et vos carreaux contre les dommages au fil du temps. Fabriqué en acier robuste, il est à la fois durable et résistant à la rouille. Disponible en plusieurs couleurs et finitions pour coordonner avec le décor de salle de bain existant ou nouveau. La tringle à rideau de douche Kenney Twist & Fit No Tools Tension en blanc est réglable de 24 à 40 po de large pour s'adapter aux ouvertures de douche compactes et debout.
Assembly required Yes
Batteries required No
color White
Country of Origin China
Customer Reviews 4.1 4.1 out of 5 stars 5,404 ratings 4.1 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
Finish types Rust
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item model number KN607C/10V1
Item Weight 10.5 ounces
Manufacturer Kenney Manufacturing
Maximum recommended load 25 Pounds
Product Dimensions 38 x 1.5 x 1.5 inches

3.1

12 Review
5 Star
62
4 Star
13
3 Star
9
2 Star
3
1 Star
13

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: DeeBreezy
Works well once you get it installed
I purchased two of these for my walk-in-closet to hang my necklaces on. These are EXTREMELY DIFFICULT to install, I'd much rather use the spring tension type. Although once installed they do seem to be very sturdy, however I would not recommend these and will not purchase again.
Scritto da: Roy
Does the job
Useful for actual curtains and not just for showers
Scritto da: DENE
Works perfectly
Stylish and functional, stays in place. Highly reccomend
Scritto da: MamaDrama
Keeps falling down
When I took the plastic off of this it literally sprang apart and things went flying. I couldn't find any real directions other then two spots that had turn arrows. I've hung many tension rods over the years so this appeared to be a typical one. I tracked down the pieces that fell and hung it up. An hour later CRASH. I've put this thing up 25x and it just keeps falling. My hubby ended up putting a double sided Command tape on each end so it's been up since but like..... C'mon!!!
Scritto da: JP
Stylish and functional
Perfect matte black curtain rod to complete our bathroom renovation!
Scritto da: A Simple
Works fine for kitchen window
I am using this to hang curtains on a kitchen window between two cabinets. Rod diameter was a bit large for the curtains I bought and had to pull rod pieces apart in order to push curtains into place. Tensioning by twisting works fine. Plain white design fits nicely with the decor.
Scritto da: Wednesday
how to adjust tension? Challenging packaging/label and, seemingly, no tension
poorly packaged, shrink wrapping was difficult to remove, peeled off in half inch strips... there is a label I can't remove... I turned it to the back of the shower. The wrapping took far too long to peel off a piece at a time but, it had torn so the rod slid out in the box... difficult to tell if the slight scratches on it were manufactured or from the lack of protection in the shipping box. you can twist the rod out to be longer than the distance from wall to wall but there is no "tension" effect that allows me to compress the rod to put it in place so it will have sufficient tension, I tried twisting it in place, the instructions are confusing, that didn't work either It works for me because I purchased it to hold the shower caddy and items hand washed allowed to drip in the shower and the rod rests on the top of the formed shower. for that purpose it is attractive and serves the purpose but, I'd recommend the HabiLife shower curtain rod I purchased for the layered fabric curtain, more expensive but far better quality and, tension worked well, easy to install
Scritto da: Armyne Peterson
Terrible Rod
Bought this rod for my bathroom. It rusted within a month. Fell off the wall three times already. Going to replace it cause every time I see the rusting it angers me at how poorly the quality is.
Scritto da: J masse
Not worth it
I would not recommend this product as it is not a spring loaded shower curtain it is hard to put up and tend to lose its ability to stay up after a little while. I am constantly fighting with it when it falls down. Spend the extra couple dollars and buy a better shower curtain rod.
Scritto da: Lorraine J Dermott
Good width and easy to install, awful stickers stuck to rod
Good width and easy to install, the only thing I would make different is they stuck stickers to the actual rod itself making them very difficult to remove and a struggle to get off, otherwise it would have just looked nasty to leave them on. Perhaps they should put the stickers on the outside wrapping and not the rod itself.
Scritto da: jabmanthehutt
Works great for me
A fair number of reviews were negative, which gave me pause. However, I still wanted a black rod, and the price was right, so I thought I'd give it a shot. I have not been disappointed, and this is the 2nd one I ordered. It was easy to install, and it holds some pretty good weight (have a rather heavy shower caddy on one rod). Just put one end where you want the bar, then extend the other end on an downward angle, about 2 or 3 inches below your target. Now this is the important part, give it a really tight turn in the direction indicated on the sticker. Really tight. Then push it up into a horizontal position. That may require some effort, but it will work. Neither of the rods have fallen once, and I have a teenage and an early 20something who are not delicate with objects. I would personally recommend this product.
Scritto da: Susan B
Good quality, easy installation!
The brushed nickel finish works with my bathroom fixtures. Happy with quality. The packaging is a bit annoying though, specifically the plastic wrap around the rod.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array