Klein Tools 80049 Kit d'outils HVAC avec tournevis de poche 3 en 1, tournevis/tournevis 8 en 1 et thermomètre de poche numérique, 3 pièces

Brand:Klein Tools

3.9/5

€
89.09

Ce kit CVC 3 pièces Klein Tools a tout ce dont le professionnel a besoin. Le tournevis HVAC Pocket 3-en-1 a une pointe dissimulable et un clip de poche pour un rangement pratique dans la poche. Le tournevis/tournevis à entraînement par glissière HVAC 8 en 1 a une tête brevetée unique qui glisse d'avant en arrière pour passer d'un tournevis à tête hexagonale magnétique de 1/4" à 5/16". Le thermomètre numérique prend des lectures ambiantes et de contact direct dans les échelles Fahrenheit et Celsius. Depuis plus de 160 ans, Klein Tools fabrique des outils à main de qualité professionnelle de qualité supérieure qui offrent les performances, la durabilité et la précision nécessaires pour bien faire le travail. Notre famille d'ingénieurs, de travailleurs et d'artisans continue de mettre six générations d'expertise dans chaque outil que nous créons en utilisant uniquement des matériaux de la plus haute qualité, une fabrication supérieure et en maintenant la fabrication aussi près de chez nous que possible. Klein n'est pas seulement le moi de notre entreprise, c'est aussi le moi de notre famille. Et puisque nous sommes une entreprise américaine familiale et gérée par une famille, vous savez que vous pouvez compter sur nous pour être là demain. Klein Tools ne se contente pas de fabriquer d'excellents produits, nous fabriquons d'excellents produits qui répondent aux exigences des professionnels qui les utilisent tous les jours... Depuis 1857.

Montant

Ajouter au panier Acheter maintenant

EAN: 0092644800498

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Outils à main, Tournevis et tourne-écrous, Tournevis,

MULTIPLES EMBOUTS ET TAILLES - comprend 2 tourne-écrous creux et plusieurs embouts de tournevis. HVAC SLIDE DRIVE Tournevis/tournevis multi-embouts 8-en-1. BOUCHON TOURNANT pour un contrôle optimal et précis. Plusieurs embouts en un comprennent #0 Phillips, 1/8" (3,2 mm) à fente et un embout Schrader. RANGEMENT DE POCHE FACILE avec des embouts dissimulables et un clip de poche.

Batteries Included?	‎Yes
Battery Cell Type	‎Alkaline
Brand	Klein Tools
Color	Silver, Black, Orange, Green
Color	‎Silver, Black, Orange, Green
Country of Origin	‎China
Customer Reviews	4.8 4.8 out of 5 stars 2,154 ratings 4.8 out of 5 stars
Head Style	Flat, Phillips, Hex
Head Style	‎Flat, Phillips, Hex
Item Dimensions LxWxH	15 x 10 x 3 inches
Item model number	‎80049
Item Package Quantity	‎1
Item Weight	‎6.3 ounces
Manufacturer	‎Klein Tools
Part Number	‎80049
Pattern	‎Nut Drivers
Product Dimensions	‎15 x 10 x 3 inches
Style	‎Kit

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Amazon Customer

Great quality

I loved the combo deal and the quality of the tools

Scritto da: Omar Jasso

Best screwdriver I ever owned

I work in maintenance and I use this tool almost daily. If you work with AC or just want a really good screwdriver with multiple attachments this is a must buy

Scritto da: John

Handy tool for HVAC

The flat blade is the right size for ground lugs and not to small for contactor lugs on condensing units. The Phillips is the right size for 24v connections. The 1/4 - 5/16 is pretty handy.

Scritto da: Crystal Plunkett

Was happy with tool not missing bit!!!!

I ordered this for my husband for work and he was so glad he needed one but when it says 8 in 1 and you get the interchangeable bit which is great but when it came the bit was missing which was disappointing. Other than that my husband said it was a great tool is why we gave a higher rating.

Scritto da: Rocky Mountain Tradesman

HVAC 8-in-1, purdy good, BUT NOT PERFECT!

This is one of those tools that could have been perfect, but it's not. Still pretty good, (4/5), and my current everyday favorite for work. -Klein, next time just license the Malco flip bit. It is a real pain in the butt to clean the bits of metal and rust out of the 1/4" to 5/16" - you know, the bits of metal that are EVERYWHERE when doing HVAC work... the thing you made the tool for... -I like it better than the Lennox 6 in 1, the Klein doesn't seem to rust up 14 seconds after water is within 37 feet of the tool. -The bit tips don't seem to magnetize as easily either, not sure who came up with that dumb idea that 6 whole electricians on earth use. -It fits in my service pouch pocket, which sounds like a derpy feature until you lose a tool somewhere in the middle of a 250 unit PM and have to stop yourself from exploding in the middle of some poor guys mechanical closet. -Works good in my hands, it's got a good medium size handle, I got square shaped medium sized mits, covered with a good squishy top layer and it doesn't look like it'll break any time soon.

Scritto da: William Vanderhoff

So happy with it

Great product so happy with it I bought 2

Scritto da: Jason L

Great Klein tool.

This is an excellent tool for anyone to have in the HVAC field. It is very handy to have a magnetic 5/16 and 1/4 hex driver. The valve core removal tool is also very handy as well. The other side of the core removal tool is a thermostat screw driver flathead. The Phillips and flathead bit works with every breaker or contactor I’ve had to change or tighten the connections. There is also a 3/8 driver if you remove the bit set sleeve. Made of good steel and fairly rust resistant. Fits in your tool bag but is more convenient to carry in your pocket. Not too bulky and has somewhat decent grip until you get refrigerant oil on your hand then it becomes slippery as most hand tools do. Great purchase. Highly recommended.

Scritto da: Robin Johnson

Works

Use it every day

Scritto da: S Sumner

All i need in 1

Best screwdriver i have ever had. it is pricey and would be better if it was insulated (just to be on the safe side) but as a HVAC engineer this is great

Scritto da: Richard

Absolute must have

Bought this back when I was in HVAC/R school and now I’m working in the field. It’s easily one of my most used tools. The 1/4“ and 5/16” magnetic nut driver feature alone was good for me, but the extras also come in very handy. If you’re looking to cut down on having many individual tools in your bag you absolutely need this.

Scritto da: Shana

Perfect multitool

I bought this for my boyfriend who had been looking for a multitool for awhile. He's an HVAC technician and needed a tool with a Schrader bit but couldn't find anything. He used this tool everyday during the summer and is using it as a regular screwdriver now that it's cold

Scritto da: Considerate

Quality tool with extra bit for removing or installing valves Well serves the purpose used in work having all bits in one tool

Scritto da: Drew.pancoast@hotmail.ca

Magnetic 14” and 5/16

I’ve had this screw driver for a couple years now. I’m a journeyman hvac/r tech of 28 years. I carry this a crescent wrench and meter and I can diagnose most anything. It’s a durable screwdriver. I had to get a new one because mine was stolen by the lil tool ferries.