Lit pour tout-petit Dream On Me Brookside en noir, certifié Greenguard Gold, certifié JPMA, design bas au sol, finition non toxique, rails de sécurité, fabriqué en bois de pin

Name: Lit pour tout-petit Dream On Me Brookside en noir, certifié Greenguard Gold, certifié JPMA, design bas au sol, finition non toxique, rails de sécurité, fabriqué en bois de pin
Brand: Dream On Me
SKU: 0693892468562
Price: 176.47 EUR
Availability: InStock

Brand:Dream On Me

3.4/5

€
176.47

Le lit pour tout-petit Dream On Me Brookside est idéal pour cette période de transition difficile lorsque votre tout-petit devient trop grand pour son berceau, mais qu'il est trop petit pour un lit pleine grandeur. Sûr, coloré et élégant, c'est un ajout bienvenu à toute chambre de tout-petit. Vous craignez que votre tout-petit entre et sorte du lit ? La conception basse du Brookside permet à votre tout-petit de gérer cela facilement. Pour plus de sécurité, le Brookside est livré avec deux rails de sécurité latéraux en bois. Les pieds centraux assurent une plus grande stabilité. Facile à assembler, le Brookside est fabriqué à partir de bois de pin néo-zélandais durable. Il présente un design de cadre moderne aux lignes épurées. Laissez votre LO choisir parmi une douzaine de finitions non toxiques éblouissantes allant du rose fard à joues et du gris galet au bleu poussiéreux et au bleu royal pendant que vous concevez la chambre de vos rêves. La sécurité n'est jamais un souci avec le Brookside. Il est certifié JPMA et est testé pour le plomb et d'autres éléments toxiques pour respecter ou dépasser les normes de sécurité gouvernementales et ASTM. Les dimensions du Brookside sont de 53L x 29W x 28H pouces. Il pèse 19 livres et la limite de poids maximale est de 50 livres. Choisissez n'importe quel matelas de berceau standard certifié Greenguard Dream On Me non toxique pour un ajustement parfait.

Montant

Ajouter au panier Acheter maintenant

EAN: 0693892468562

Catégories Théorie de la santé, Mobilier, Lits d'enfant et lits de bébé, Lits pour tout-petits,

SPÉCIFICATIONS DU PRODUIT : Les dimensions du Brookside sont de 53L x 29W x 28H pouces. Il pèse 19 livres et la limite de poids maximale est de 50 livres. Choisissez n'importe quel matelas de berceau standard certifié Greenguard Dream On Me non toxique pour un ajustement parfait. Finitions éclatantes : explorez une variété de thèmes de chambre pour tout-petits avec le Brookside. Il est disponible en 12 couleurs de peinture éblouissantes, non toxiques et à base d'eau, du rose blush au gris galet en passant par le bleu royal. Mélangez et assortissez avec d'autres meubles lorsque vous concevez l'espace spécial de votre tout-petit. SÉCURITÉ GARANTIE : La sécurité est notre priorité absolue et le Brookside ne fait pas exception. Il est certifié JPMA et est testé pour le plomb et d'autres éléments toxiques pour respecter ou dépasser les normes de sécurité gouvernementales et ASTM. Design moderne : les lignes épurées et la conception contemporaine du cadre de Brookside en font un ajustement idéal pour tout thème de design. Construit en bois de pin de Nouvelle-Zélande, il est facile à assembler et constitue un meuble durable et robuste. Facilitez le temps de transition : le lit pour tout-petit Brookside est livré avec un design bas au sol pratique qui permet à votre enfant d'entrer et de sortir facilement du lit. Deux rails de sécurité latéraux en bois rendent le lit plus sûr, tout comme les pieds centraux, assurant la stabilité.

Assembly required	Yes
Batteries required	No
Brand	Dream On Me
Care instructions	Wipe with Dry Cloth
Color	Black
Country of Origin	China
Customer Reviews	4.3 4.3 out of 5 stars 554 ratings 4.3 out of 5 stars
Department	Baby-boys
Import	Imported
Included Components	Toddler Bed
Item model number	648-BLK
Item Weight	19 Pounds
Manufacturer	Dream On Me
Maximum recommended load	50 Pounds
Product Dimensions	53 x 29 x 28 inches
Room Type	Nursery Room
Size	53x29x28 Inch
Size	53x29x28 Inch (Pack of 1)
Warranty Description	30 days limited warranty.

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Angel Hawkins

Built to last

My baby girl love sleeping in her new bed just as much as she like to bounce on it she is a 30 lbs baby and the slack hasn’t given in it took a while to put together but it was still super easy to do so

Scritto da: Tracy Randle

Good product

Sturdy and baby loves it

Scritto da: brittany w.

Nice bed but two people assembly!

I had trouble putting this bed together to start the headboard centerpiece is made of like a cheap very thin piece of pressed board so hopefully she won't be able to put a hole in it by like kicking it or something cause I could've snapped it in half with my own bare hands if I wanted to, during assembly I had to make sure my kids weren't playing with it. there is also two legs that are in the center of the bed that hold up the two rails which are not one piece each is two pieces so 4 pieces total I had to drill self drilling screws they had no holes started for me or anything I ended up using power tools it was too hard to hand screw with a screwdriver and I was second guessing because I didn't want to put in holes in the wrong spot the directions were a bit confusing at times definitely do not look at the pictures as the main cause it looked like they wanted a bracket that holds the rails together, on the rails, but the next step showed it looking like it was on the foot not the rails...some of my pieces didn't have like the stickers with part numbers on each piece (like A1 and D1) so I would know what was what it literally took me three hours to build this bed all by myself I should've waited for my husband but I was impatient I put my sons twin bed together by myself and their cube organizer so I thought I could handle this bed but I was partly wrong I mean I eventually figured it out but it was a pain... the slats for the bed as well I would put two in and two would fall out I had to have my son help me at one point the slats didn't all go in nicely either some of them I had to twist to get in...overall I think now that it's together it's a fairly nice bed but much easier with two people than one for some reason the black was the most expensive I paid $100 and I do not feel it was worth that much probably more like the $70 that the white one costs the only thing I was really surprised by was shipping was super fast I ordered on February 17th and it said I would receive March 3-12 and I got it February 19th or 20th so that was nice we'll see how it holds up I hope that it does after all the work putting it together! I wish I would've looked around a little more but it's not terrible it'll do the job for a little while at least..

Scritto da: Maria

Missing screw

Assembly was decent. The slates were a bit of a challenge having to do it alone. I am missing a screw but not to worried since I can use the bed with one railing instead of both.

Scritto da: Nash

Looks great in my daughters room. Easy to put together

Nothing to dislike

Scritto da: Nicholas Z

Perfect transition for your little one…

It’s smaller than a crib bed combo, also makes your little one feel like a big kid to have their own “big kid” bed. Has thick wooden slats to support the mattress unlike some of the graphic character beds on here. Also allows you to take their crib mattress and put it on this bed saving you money until it’s time to transition them to an actual twin/full sized bed.

Scritto da: Natasha

Great bed for the price!

***I will say first off if your toddler is very proned to jumping on the bed or is rough in that sense with stuff the slates will break. I'd recommend have a 1/4 thick piece of mdf cut to put over the slates for extra support.**** A very nice product for the price. All screws, bolts, and wood pieces came in the package. Everything in tact. The pieces are are labeled according to the instructions. The instructions were very clear. They have the bolts labeled as letter in the instructions, but my bags were not labeled. So make sure you are putting the right screws in the right spots. The "hardest" part was putting the slates into the otherside. A little bit of a pain. One person can assemble this, but two can be useful for the slate part. You may need a drill or a Phillips screwdriver, just becareful with the drill so you don't split the wood. All in all a good product for the price. Beautiful finish on it too.

Scritto da: Nathaly

100% recommended- Amazing bed

The bed took 1 hour to build, color is exactly as pictured and aesthetically pleasing when completely built. Great value for your money I weigh 160lbs at the moment I have laid on the bed on my own and with my 5 year old next to me. I sit on this bed when we work on homework.great.value.