Lutron Maestro MA-L3T251HW-WH, MA-L3T251HW-WH, gradateur/minuterie numérique unipolaire 300 watts avec plaque murale, pour ampoules incandescentes et halogènes, gradateur/minuterie blanc avec plaque murale

Brand:Lutron

2.8/5

92.63

Remplacez un interrupteur par la combinaison gradateur et minuterie Maestro et bénéficiez des avantages supplémentaires de deux commandes sans occuper l'espace supplémentaire sur votre mur. Le gradateur Maestro regroupe plusieurs fonctionnalités dans une seule commande, comme un fondu différé, ce qui vous donne le temps de quitter une pièce en éteignant lentement la lumière. Les lumières douces et brillantes sur le côté du gradateur indiquent la commande d'éclairage préréglée et servent également de voyant lumineux dans une pièce sombre. La partie Maestro Timer de cette commande vous aide à économiser de l'argent et de l'énergie en éteignant automatiquement les lumières et les ventilateurs après une durée prédéfinie. Utilisez l'interrupteur du robinet pour allumer et éteindre la minuterie, et utilisez la bascule sur le côté pour régler la minuterie sur l'option de temporisation souhaitée, entre 5 et 60 minutes. Des voyants orange faiblement allumés indiquent le temps restant avant l'extinction. Le gradateur Maestro et le contrôle de la minuterie sont parfaits pour les salles de bain, en utilisant le gradateur sur les lumières de la vanité et la minuterie sur le ventilateur d'extraction. L'utilisation d'une minuterie sur les ventilateurs d'extraction aide à réduire la croissance de l'humidité et de la moisissure dans les salles de bains. Pour un look propre et soigné, utilisez la combinaison du gradateur et de la minuterie Maestro, et économisez de l'argent et de l'énergie.

Plaque murale coordonnée incluse. Parfait pour la salle de bain et tout endroit où un économiseur d'espace est nécessaire. Idéal pour les rénovations - pas besoin de couper de l'espace supplémentaire dans la boîte. La minuterie a des voyants orange qui indiquent le temps restant avant l'arrêt. La minuterie peut être réglée pour faire fonctionner le ventilateur ou la lumière pendant 5 à 60 minutes avant de s'éteindre automatiquement. Combine un gradateur et une minuterie pour automatiser l'éclairage. Le produit fonctionne uniquement avec des ampoules à incandescence et halogènes ; ne pas utiliser avec des ampoules LED.
Actuator Type Rocker
Actuator Type ‎Rocker
Amperage Capacity ‎2.5 Amps
Batteries Included? ‎No
Batteries Required? ‎No
Brand Lutron
Brand ‎Lutron
Color White
Color ‎White
Country of Origin ‎China
Customer Reviews 3.7 3.7 out of 5 stars 37 ratings 3.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Protection Rating IP00
International Protection Rating ‎IP00
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 1.5 x 2.8 x 4.2 inches
Item Dimensions LxWxH ‎1.5 x 2.8 x 4.2 inches
Item model number ‎MA-L3T251HW-WH
Item Package Quantity ‎1
Item Weight ‎5 ounces
Manufacturer ‎Lutron
Mounting Type Wall Mount
Mounting Type ‎Wall Mount
Number of Items ‎1
Operating Voltage 120 Volts
Operating Voltage ‎120 Volts
Operation Mode Automatically
Operation Mode ‎Automatically
Part Number ‎MA-L3T251HW-WH
Product Dimensions ‎1.5 x 2.8 x 4.2 inches
Style ‎Dimmer/Timer w/Wallplate
Switch Style Rocker
Switch Style ‎Rocker
Unit Count ‎1 Count
Voltage ‎120
Wattage 300
Wattage ‎300

2.8

10 Review
5 Star
46
4 Star
11
3 Star
18
2 Star
17
1 Star
9

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Amazon Customer
Works with LED Dimmable light bulbs
I installed 1 of these and it worked so well I bought a second one for an upstairs bathroom. It works fine with the newest dimmable LED bulbs (E.G. Sylvania brand bought at WalMart). Set the level, and it 'remembers' it every time you turn it on. It does require at least 2 bulbs in the circuit, and 3 is better. The problem is that with only one bulb, the light stays on (dim) when it should be off. But with the higher load it works fine. I like how it brings up and down the light levels rather than immediate on and off. The fan timer works as expected and as desired. I set mine for 10 minutes, and a single press gives me 10 minutes of run time. A 'double press' turns the fan on until it is turned off with another press, a nice feature. Of course, the best feature (and the reason for buying this) is that it fits in a one-gang electrical box. I searched long and hard and this is the only combo light-switch/fan-timer that I could find in this form-factor. Installation was extremely easy. Be sure to ground the unit else the dimmer may make an annoying whining noise.
Scritto da: RCJHKU
Switch is fine, description is poor
Disappointed I had to come back to Amazon and buy a wall plate because the Lutron MA-L3T251 does not come with the plate. The switch should come with a plate. 1. The switch can be over $60, should have a plate 2. Switch is a custom color, most people will want the plate. 3. A plate is pictured in the switch ad. 4. The listing says (upon checking) wall plate is not included but hidden deep in the horribly written "Product description" Also note the switch behavior is not quite as advertised. "Two taps" to full bright is deceiving. One tap is a slow rise to bright, 2 taps is a faster rise to bright. "Press and Hold for 10-second fade off" seems to do nothing. It fades to off no matter what at the same rate. There is brief mention of this in the "Product description" run on sentence but the fan will cycle down with a minute left. It will then cycle back up until time runs out. Seems unnecessary and can't be good on fan motors.
Scritto da: SoTacMatt
Great switch, don't use with LED bulbs.
The switch does exactly what I want, but takes some getting used to. I replaced a double switch, so it fit right where the old one was. The LED's are kinda dim, which you don't necessarily want them too bright. For me, the light switch is the top. I had recently switched all my bulbs to LEDs. DON'T USE LEDS WITH THIS SWITCH. We had to go back to incadesant bulbs. At first I wasn't sure the fan worked. I finally left it alone and it was fine. I haven't had mine long enough to possibly experience some of the issues others did.
Scritto da: amr612
Pricey, but highly functional
A little pricey, but all the functionality is worth it. We are slowly replacing all the switches in our house with these. The timer switch allows you to choose how long the fan will run so you know it will turn off on its own. The light switch allows you to turn the lights on to full brightness with 2 taps. You can set a special light level and that level will be used when you turn on the switch with 1 tap. Turn off immediately with 1 tap, or press and hold to set an amount of time the light will stay on and then gradually turn off. This is great for bathrooms if you get up in the middle of the night -- you can set it to turn off in 5 or 10 (or however many you wish) seconds so you can see your way back to bed and then it will turn itself off.
Scritto da: Ken
Works well, just kind of pricey
I think this is too expensive, but it works well and is in line with other options (of which there are few). I have no opinion of the install because we had an electrician install it for us (and run new 14/3 wire so we could separate the exhaust fan from the bathroom light, which was the purpose of this purchase).
Scritto da: Arden Rynew
Another Lutron quality product.
I've only given this 4 stars since it doesn't fully fit my needs. I needed a timer switch plus a separate On/Off switch. No one makes that combination. I'm sure a lot of people buy the new Panasonic Bathroom Fan Combo's and need such a combo switch..... I hope Lutron reads this.
Scritto da: Christopher Larson
Works fine with incandescent
Works well as specified. Would be 5 stars if they offered this product to dim LED. That apparently is not available in this configuration (timer + dimer in single gang). Works fine with incandescent, intermittent flashing with LED at full light.
Scritto da: dmpete
it still flickers like it is trying to come on
When the light is off, it still flickers like it is trying to come on. It has been double and triple checked but the configuration is correct according to the instructions included. The fan that runs on the timer switch works great.
Scritto da: jerry b
Just what I needed
Have this switch wired so the top switch is for the light and the timer is for the exhaust fan. Couldn't be happier.
Scritto da: Amazonuser
Confused installation instruction
Very confused. In the device,the top brass wire terminal is labeled as line or live. But in the instruction sheet, it describe the bottom black terminal as live.

Produits connexes

hot
Lutron Toggler LED+ Gradateur
3.6/5

€ 51.27

Lutron Toggler LED+ Gradateur
3.6/5

€ 51.27

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array