Marinco 11095 Klaxon caché 12 V, OEM

Brand:Marinco

3.5/5

53.26

DESCRIPTION DU PRODUIT Les klaxons cachés encastrables d'AFI combinent un certain nombre de caractéristiques souhaitées en une seule unité, notamment : une installation simple, une grille élégante à clipser avec un tissu résistant à l'eau, un son marin authentique et une mise à niveau facile à installer. AMAZON.COM Produisant un son marin traditionnel, ce klaxon de bateau présente un design encastré et caché et est fabriqué par AFI, l'inventeur des premiers klaxons de bateau sous le pont. La grille élégante du klaxon, qui est vendue séparément, arbore un tissu résistant à l'eau et s'enclenche pour une installation facile. La corne monte de l'extérieur. Spécifications * Espace interne requis : 2 1/4 pouces de haut par 3 5/8 pouces de large par 3 1/2 pouces de profondeur * Intensité maximale : 3 ampères * Classement DBA : 105 à 1 mètre * Fréquence fondamentale : 440 +/- 20 hertz À propos d'AFI Horns AFI est le principal fournisseur d'avertisseurs sonores pour l'industrie maritime, avec plus de 50 ans d'expérience dans la conception et la fabrication d'appareils sonores spécifiquement destinés à être utilisés dans des environnements marins difficiles. L'acier inoxydable est utilisé pour tous les composants critiques tels que les trompettes, le capot du moteur, les diaphragmes et le matériel d'assemblage et de montage. AFI propose une gamme complète de klaxons marins conçus pour répondre à presque tous les besoins, y compris des klaxons électriques et pneumatiques, des klaxons compacts, des klaxons électriques et pneumatiques sous le pont et une gamme complète de klaxons encastrables avec un large assortiment d'options de gril. Garantie du fabricant AFI garantit que ce produit est exempt de défauts de fabrication ou de matériaux à compter de la date d'achat pour une période d'un an. À propos d'AFI AFI fabrique une grande variété de produits qui résistent à l'environnement marin éprouvant. Chaque produit qu'elle fabrique - de ses moteurs et bras d'essuie-glace robustes à une large gamme de klaxons de bateau, d'échelles et de plateformes de bain - est conçu pour résister aux rigueurs de la vie en mer. Même la gamme de meubles et d'accessoires en teck de la société est conçue pour fonctionner à merveille, que vous soyez en route ou à l'abri.

Le gril doit être commandé séparément. Mise à niveau facile, se monte de l'extérieur et la grille du klaxon s'enclenche pour une installation facile. 12 V CC, consommation d'ampères maximale : 3 A. Fréquence fondamentale : 440+/-20Hz. Note dB(A) : 105 dB à un mètre. REMARQUE : Espace interne requis : 2,25 H x 3,625 L x 3,5 P.
Brand Marinco
Brand ‎Marinco
Brand Name ‎Marinco
Color Chrome
Color ‎Chrome
Customer Reviews 4.4 4.4 out of 5 stars 746 ratings 4.4 out of 5 stars
Fit Type Universal Fit
Fit Type ‎Universal Fit
Item Package Dimensions L x W x H ‎7.4 x 6.69 x 3.31 inches
Manufacturer ‎Marinco
Noise Level ‎105 dB
Package Weight ‎0.31 Kilograms
Part Number ‎11095
Size ‎Small
Sport Type ‎Boating
Style Drop-in Without Grill
Style ‎Drop-in Without Grill
Voltage 12 Volts
Voltage ‎12 Volts

3.5

13 Review
5 Star
70
4 Star
16
3 Star
6
2 Star
3
1 Star
5

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Dustin Saiger
Perfect replacement for rusted out horn
My 2016 Robalo Cayman 223 had the horn stop working suddenly. Opened it up, and the horn was a pile of rust failing apart. Ordered this and literally within 15 minutes had the horn swapped and works perfectly. Direct replacement for any bow mounted oval horn with a white or stainless grill. Fit perfectly and two wires just like the factory one. Loudness is about on par as OEM one. Great replacement.
Scritto da: Chris B.
Perfect replacement for stock horn
Bought a used 2005 Bayliner 205 and the horn was not working. This was an was replacement, pry off the cover and three screws and a power plug later our horn is back to working! Have only used for one season so not able to speak to it's longevity but works perfectly so far.
Scritto da: Tracer800
Purchase to replace the same unit that is 14 years old
Direct replacement for the weak one i pulled out of my boat (AFI Model L horn). The unit tested good prior to install in as loud for its size. No Extra modification to mounting holes - direct fit / 14 years later.!!! Did add small piece of window screen material between the cover plate and the horn to prevent insects from building nests (wasps, etc.) in the body of the horn This unit does not come with the White, Black or Aluminum covers. So make sure you keep that from your old unit if you replace it with this one.
Scritto da: sswallow
Worked, but will not hold up over time
Installed this device because it was a drop in for my old one. By the end of the summer it was already dead. Did not hold up to normal use in the ocean. You get what you pay for in this case.
Scritto da: Joe Desanti
Good value
Great option for replacing OEM horn.
Scritto da: GREGORY TEDESCO
Ok
Ok
Scritto da: SunshineStateJG
Easy to install & worked 1st time
This was purchased as a replacement for original horn on 2006 Bayliner. It was an easy fit and worked 1st time. Only niggling aspect is that the original white plastic horn cover did not "Click" back into place on the new horn,(as it had on original horn). So I had to add some adhesive on each of the three locking clips and so far the cover is still holding tight.
Scritto da: Tony. Tente
Great product
Love this horn it was delivered on time highly recommend this product easy to install
Scritto da: Jerry Haggarty
Perfect and as described
Installed it in my 20 runabout boat. Looks great, works awesome.
Scritto da: john chernyk
Factory replacement
Fit perfect I recommend this product !
Scritto da: RT
focntionne très bien
fonctionne très bien.
Scritto da: Erin C Gallant
Good Replacement of Model L Horn for Bayliner 2052 Cuddy Boat
Does not come with grate cover/grill which is odd since there is likely a leak in the original cover plate/grill/thin plastic that caused the original failure. The horn itself is like 3-5mm larger in diameter than the original (plate is teh same though) which made the screw holes shift over to the one side since the side of the horn was hitting the plywood inside the anchor bay. A little shave of the plywood with a drill bit on the inside of the anchor bay allowed the plate holes to line up with the original holes making it a seamless swap. Took approx 5-10 mins to pull out the oldhorn, shave the inner plywood a bit and replace with this horn.
Scritto da: RGB
It’s nice and loud looks good
My boat horn was old and not working this was the replacement model style put it in works like hot damn

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array