Monarch Rain Chains 20042 Adaptateur de gouttière en aluminium avec revêtement en poudre noire Installation de la chaîne de pluie, standard

Brand:Monarch Rain Chains

3.7/5

37.11

Adaptateur de gouttière en aluminium revêtu de poudre noire de Monarch pour kit d'installation de chaîne de pluie, taille standard améliore le débit d'eau, réduit les éclaboussures et complète votre chaîne de pluie. S'adapte à la plupart des gouttières et est livré avec une plaque de cuivre supplémentaire pour s'adapter aux gouttières plus grandes. Installation facile qui ne nécessite aucun outil.

Aucune unité disponible
Dimensions globales de l'article : le réducteur de gouttière à chaîne de pluie mesure 12,7 cm (L) x 8,9 cm (l) x (7,6 cm) H. Ouverture supérieure 5,1 cm, ouverture inférieure 4,4 cm ; Assurez-vous de nettoyer vos gouttières avant d'installer le kit d'adaptateur de gouttière pour chaîne de pluie sur votre chaîne de pluie extérieure. Installation facile : l'installateur de gouttière se fixe facilement directement sur le dessus des chaînes de gouttière. Le boulon en laiton sur le petit adaptateur de gouttière pour chaîne de pluie a une rainure centrale pour accrocher et fixer les chaînes de pluie pour les gouttières. AUGMENTEZ L'APPEL DE BORDURE : Un installateur de chaîne de pluie, en combinaison avec des tuyaux de descente de chaîne de pluie pour les gouttières, offre un attrait unique qui améliorera l'apparence de votre maison. Complétez le look en ajoutant l'un de nos bassins d'ancrage ou piquets d'ancrage. Construction de qualité supérieure : l'installateur de gouttière pour chaîne de pluie est fabriqué en aluminium avec un boulon en laiton pour accrocher votre chaîne de pluie. Le kit de chaîne de pluie offre un moyen sûr et homogène d'accrocher vos chaînes de pluie à la gouttière. Design fonctionnel : l'adaptateur de chaîne de pluie est conçu pour s'adapter à la gouttière au-dessus du trou de vidange où il y a un tuyau de descente. Le support de chaîne de pluie capte l'eau de pluie et se rétrécit pour diriger l'eau de la gouttière dans les tuyaux de descente de la chaîne de pluie.
Country of Origin India
Customer Reviews 4.6 4.6 out of 5 stars 1,067 ratings 4.6 out of 5 stars
Item model number 20042
Item Weight 4.6 ounces
Manufacturer Monarch Rain Chains
Product Dimensions 5 x 3.5 x 3 inches

3.7

13 Review
5 Star
78
4 Star
14
3 Star
5
2 Star
2
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Juana
Useful
These adapters for use with rain chains were easy to install and use immediately. I had three installed, with the rain chains in about an hour. Waiting for rain so we can watch them in action.
Scritto da: Cary Alburn
A pain to install, but once installed, worked perfectly.
The media could not be loaded. This adapter might work well in a pre-existing downspout hole, but cutting a hole where there wasn’t one was a pain. It would have been helpful if the instructions stated what size hole saw might be appropriate, but it didn’t. I think a 2 1/4” would work, but I only had a 2” and 2 1/2” in my tool box, so I used the larger one—hole saws are expensive. And cutting into a thin aluminum gutter is difficult. The reinforcement plate provided is slightly too wide for a standard 5” K gutter—so I cut off about 1/4” with tin snips so that it would lay flat in the bottom of the gutter. That’s something that the manufacturer should change, to make it easier to install in a 5” gutter—it would still have to be shaved for a 4”, but very few gutter installers install 6” gutters. I then sealed both the adapter and the reinforcement plate with gutter sealant, gluing them in place. My timing was perfect, because the gutter sealant instructions said to wait 24 hours—a driving rain happened 26 hours later. End results: great!
Scritto da: Goldens
Was exactly what we needed
Great fit for our rain chain
Scritto da: Meche
Larger adapter plate very helpful!
This Monarch rain chain install kit was just what I needed for my older gutters. The adapter piece on its own was not big enough to cover the shape and size of my gutter outlet so I put the larger plate through the top hat and glued them together with roof cement then dropped it through the gutter outlet and sealed in place. Kudos to the Monarch manufacturer for furnishing different size plates. I also like that the material is powder coated aluminum because the copper type would cause a corrosive reaction. Photos attached
Scritto da: Amazon Customer
Seems sturdy
I think some water leaks around from the sides but I guess it doesn't make a difference. It seems sturdy enough and u hooked a rain chain that was kinda heavy. Worked well for me.
Scritto da: Robert D.
Necessary to attach chain to gutter.
There were no instructions. Basically you will need a 2" hole saw to punch a hole in the bottom of the gutter. The adapter will just fit through thru. There is no way to attach or seal it to the bottom of the gutter. I used some silicone caulk to seal it and then drilled holes at each end of the adapter and screwed it to the gutter. The installation took 10 minutes - that is after I located a 2" hole saw, caulk and screws.
Scritto da: R S Cobblestone
Works great!
Works great with a Monarch Rain Chain link in my downspout!
Scritto da: JMLMT
Perfect and easy to install
This was so easy to install; drop it into place, and you're done after attaching the rain chain. It took me more time to remove the old spout (merely for aesthetics) and attach chain. A DIY project for sure
Scritto da: Francisco Garcia
Muy resistente
Todavia no lo instalo, pero es muy resistente
Scritto da: Leslie K.
Bad fit
They didn’t fit in my eves troughs. Totally useless and too late to return
Scritto da: Shannell
Superfluous to need
As above
Scritto da: Tinus
Good
Good system for rain chains
Scritto da: Judith A
easy to install addition to the rain chain
essential addition to the rain chain

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array