MotorGuide 8M4004173 Katana Hélice à deux pales — 10,25 pouces de diamètre, moyeu de 3,5 pouces — Comprend une goupille, un écrou et une rondelle

Brand:MotorGuide

3.6/5

87.73

Livré avec goupille, écrou et rondelle. A un moyeu de 3,5 pouces, un diamètre de 10,25 pouces, une construction en nylon rempli de verre (ne convient pas aux modèles Hand-Op X3). L'hélice sans mauvaises herbes excelle dans les applications en eau courante, peu profonde et en eau libre. Fournit jusqu'à 30 % d'efficacité de batterie en plus par rapport aux accessoires précédents. Une conception innovante et une technologie de pointe en font l'hélice de moteur de pêche à la traîne la plus puissante et la plus efficace disponible.

Livré avec goupille, écrou et rondelle. A un moyeu de 3,5 pouces, un diamètre de 10,25 pouces, une construction en nylon rempli de verre (ne convient pas aux modèles Hand-Op X3). L'hélice sans mauvaises herbes excelle dans les applications en eau courante, peu profonde et en eau libre. Fournit jusqu'à 30 % d'efficacité de batterie en plus par rapport aux accessoires précédents. Une conception innovante et une technologie de pointe en font l'hélice de moteur de pêche à la traîne la plus puissante et la plus efficace disponible.
Brand MotorGuide
Brand Name ‎MotorGuide
Color Black
Color ‎Black
Customer Reviews 4.5 4.5 out of 5 stars 381 ratings 4.5 out of 5 stars
Included Components ‎End Product and Infromation
Item Package Dimensions L x W x H ‎12 x 9 x 3 inches
Manufacturer ‎MotorGuide
Material other
Material ‎other
Model Name ‎Motorguide Boat Propellers
Number of Items ‎1
Package Weight ‎0.32 Kilograms
Part Number ‎8M4004173
Recommended Uses For Product For Salt Water
Size ‎One size
Suggested Users ‎unisex-adult

3.6

9 Review
5 Star
75
4 Star
13
3 Star
6
2 Star
2
1 Star
4

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: C Wray
Definitely more power.
Definitely more thrust and top speed but definitely more noise and vibration at high speed too. Under normal operation anchoring or moving slowly it is fine. Seems to turn more slowly holding the boat still in mild current. I think the thicker material will be more durable when bouncing off of the occasional oyster rake than the thin edges on the other two motorguide props. I’m happy with it after the first use and think it will prove to be the best of the three.
Scritto da: josiah
Work perfect on my motor guide xi3
Works great with my xi3 and grass ninja 2.0 especially in the thick Florida vegetation.
Scritto da: jim
Installed on a Xi5, need to bring a 3/8" drill bit as the hole is about .005" undersized
works great!
Scritto da: David Zeigler
mild rubbing on motor housing with my older F43 trolling motor
After installation there was rubbing on the motor housing. It may have resolved itself but i made a small modification. The area of rubbing was marked on the prop hub when I removed it. I took a Dremel with a 1/8th inch bit to remove about 1/16th of an inch of material off the "spokes" inside the hub (see image). This was sufficient to allow the prop to rotate freely. Super easy modification. I believe this will be better in the weeds than my 3 blade prop, but I haven't gotten the boat out yet. I doubt I'll notice any improvement in battery life as I never fully deplete my battery.
Scritto da: Paul
Just a prop
It's quiet and runs smoothly. But I'm not seeing the extra power described by others. I have to increase power to achieve the same trolling speed as I did with the original prop. Still works well.
Scritto da: Eric Jeter
More speed
It has more speed than the 3 blade glade they decided to make 2 blade prop again amazing
Scritto da: spike1
MOTORGUIDE 24V 82# PRO
Everybody needs a replacement. Fits perfect and now stored as a back up propeller
Scritto da: Derrick Dixon
not compatible with Intex
looks like a great prop, but unfortunately, did not fit Intex trolling motor 68631, bm4212, which has a 3.5" diameter hub. The hole in this prop is smaller than stock prop's and doesn't go onto lower non-threaded portion of the hub bolt. Would appreciate any recommendations for an aftermarket prop that will fit Intex.
Scritto da: Belinda
Great propeller
Found Amazon to be cheaper than local sellers near me , so purchased through Amazon Al extremely happy with purchase To be frank it’s one bloody good propeller If I had only one small criticism - motoguide should Iinclude the sacrificial anode in with nut supplied with propeller

Produits connexes

hot
Hélice hors-bord VEVOR 3 pales 13,25 x 17
3.5/5

€ 157.56

Hélice hors-bord VEVOR 3 pales 13,25 x 17
3.5/5

€ 157.56

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array