0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

NEIKO 10037A Jeu de forets pour gaucher, forets en acier rapide avec revêtement en nitrure de titane, forets à torsion inversée, tailles SAE, jeu de 15 pièces 15 PC TITANIUM - MAIN GAUCHE

Brand:Neiko

3.3/5

€
63.65

Ensemble tout-en-un : ce kit est livré avec les forets disposés dans un étui de rangement en métal à fort impact. Chaque bit a une fente de taille spécifique pour une identification rapide et une organisation, une portabilité et une sécurité faciles dans votre maison, garage ou atelier. LA BONNE TAILLE : Notre kit de forets polyvalents pour gaucher est disponible en ensembles SAE de 5, 13 et 15 pièces. Choisissez le jeu de mèches à grande vitesse qui répond à vos besoins en matière d'extraction de vis. Chaque ensemble constitue un excellent ajout aux outils automobiles ou domestiques. PIÈCES POLYVALENTES À GAUCHE : La conception spéciale à gauche est idéale pour une utilisation avec des perceuses réversibles avec extracteurs de vis pour retirer les fixations, vis, boulons et goujons cassés lors de réparations à domicile, de projets de garage automobile, de travaux professionnels, etc. Forets en titane de qualité : ces forets sont fabriqués en acier rapide avec un revêtement en nitrure de titane, offrant une dureté de surface élevée pour aider à pénétrer les matériaux résistants. L'acier réduit également la friction entre le foret et la pièce. Ensemble de mèches torsadées : chaque mèche en acier dispose d'une pointe coudée, d'un style torsadé et d'une pointe fendue à 135 degrés pour un centrage automatique précis. Conçus pour augmenter la vitesse de coupe, ces forets empêchent de marcher pour éliminer rapidement les copeaux et les particules.

Montant
Ajouter au panierAcheter maintenant

EAN: 837013100379

Catégories Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Pièces et accessoires pour perceuses, Mèches à torsion, Mèches Forets, Mèches Jobber,

Ensemble tout-en-un : ce kit est livré avec les forets disposés dans un étui de rangement en métal à fort impact. Chaque bit a une fente de taille spécifique pour une identification rapide et une organisation, une portabilité et une sécurité faciles dans votre maison, garage ou atelier. LA BONNE TAILLE : Notre kit de forets polyvalents pour gaucher est disponible en ensembles SAE de 5, 13 et 15 pièces. Choisissez le jeu de mèches à grande vitesse qui répond à vos besoins en matière d'extraction de vis. Chaque ensemble constitue un excellent ajout aux outils automobiles ou domestiques. PIÈCES POLYVALENTES À GAUCHE : La conception spéciale à gauche est idéale pour une utilisation avec des perceuses réversibles avec extracteurs de vis pour retirer les fixations, vis, boulons et goujons cassés lors de réparations à domicile, de projets de garage automobile, de travaux professionnels, etc. Forets en titane de qualité : ces forets sont fabriqués en acier rapide avec un revêtement en nitrure de titane, offrant une dureté de surface élevée pour aider à pénétrer les matériaux résistants. L'acier réduit également la friction entre le foret et la pièce. Ensemble de mèches torsadées : chaque mèche en acier dispose d'une pointe coudée, d'un style torsadé et d'une pointe fendue à 135 degrés pour un centrage automatique précis. Conçus pour augmenter la vitesse de coupe, ces forets empêchent de marcher pour éliminer rapidement les copeaux et les particules.
Brand Neiko
Country of Origin China
Customer Reviews 4.3 4.3 out of 5 stars 2,165 ratings 4.3 out of 5 stars
Cutting Angle String 135 Degrees
Finish Type Titanium
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 14.17 x 9.06 x 7.87 inches
Item model number 10037A
Item Weight 0.01 ounces
Manufacturer Ridgerock Tools Inc.
Material Alloy Steel
Product Dimensions 14.17 x 9.06 x 7.87 inches
Shank Type Straight
Surface Recommendation Metal,Steel
Tool Flute Type Spiral

3.3

13 Review
5 Star
63
4 Star
18
3 Star
9
2 Star
4
1 Star
6

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Zero Signal
A great trick to have in your toolbox
If you've ever broken off a bolt below the surface, you know what your choices are: Try to tap it out with a punch, drill it out, use a bolt extractor, weld a nut onto it, etc. One that often gets overlooked is using a left hand drill bit. Since most bolts are right-hand thread, drilling with a left-hand bit does two things at once: It weakens the bolt which reduces the pressure on the outside holding it in place, and it provides a twisting force in the direction that unscrews the bolt. Often this is enough to get the bolt out by itself. If not, you either keep drilling or you use a screw extractor in the hole you just created. Very rarely do I have to go any further. This set of bits will handle small and medium-sized bolts and screws, and it does so well. The bits themselves have a tendency to get dull but they're not difficult to resharpen. Since I only drag them out when I break a bolt, they don't get a lot of use and thus last a long time. Would they survive in a machine shop? Maybe not. The metal is fairly soft and it doesn't take much to chowder up the cutting lips. But they've been in my home shop for 10 years and are still going strong. I use them sparingly, but when I need them they usually solve the problem quickly.
Scritto da: Blinds Guy
Worked
The smallest bit broke on me however the next size up did the trick in removing a broken bolt.
Scritto da: Steven Motley
Does the job
Used this to remove a broken bolt holding a strut in place. It did the job. Broke 1 drill bit during the process. But for the price have to say we'll worth it
Scritto da: J. Hoffman
Start small, use lube
These worked great. Broke a bolt off while putting a transmission back together. Started with the small bits and worked my way up in size. Did this about 3 times before the drill bit finally grabbed the bolt end and unscrewed it. My part is saved (minus a bolt). Used drill oil too keep bits from dulling. Bought the 13 piece set for nearly 1/2 the price.
Scritto da: KrakMonkE9
Godsend
I purchased these to remove some badly stripped screws, some of which had broken off heads. They worked perfectly, and efficiently drilled holes into the steel screws to permit me to insert and use some spiral flute extractors. After use, the drill bits were in great condition and showed very little wear.
Scritto da: robert jordan
good product
A good product for the cost. Worked well.
Scritto da: Gabe
Pretty good bits for the price
These bits got me out of several sticky situations with broken fasteners, i like that there is a few different sizes even tho i only use like the smaller ones for starting holes. they Dont break very easy about the only thing that would make these 5 star is coming with a lifetime warranty.
Scritto da: SiteReader
Got me out of a jam--recommended
I do most of my auto repair by myself––age 73, so no novice, but not a pro by any means. I had broken off two of the five valve cover bolts on my '02 Honda Accord while tightening down. (Watched too many videos on the subject and tried to use my 1/2-inch torque wrench, which just wasn't made for a light 7 foot-lb. setting. Next time, it's back to the old "feel" method.) These are 6 mm (just under 1/4-inch) bolts that have a flange on them that prevents tightening them down too deep into the aluminum head. So I suspected they were not jammed into the threads. They should come out easy if I could get a drill into the bolt center and reverse thread out. I tried my set of Grabit brand easy-outs, but it just made a mess of things. You set your drill on reverse and use one end to drill a pilot hole (they call it "burnishing"). Then you flip the bit over and use the other, reverse-threaded end to try to grab the bolt and screw it out. I tried the #1 and #2 Grabit bits, but no go. I suspect these are only good for soft metal, because I spent nearly an hour drilling and very little metal was removed. They just left a rounded depression in the top of the broken bolt. Their promotional videos always show it being used on wood screws, which are softer than automotive bolts. I switched to a nice set of titanium drill bits that I reserve for metal, no wood--trying 7/64, 1/8, 9/64, 5/32, and 11/64. Nothing would remove much steel. I haven't used this set much at all, so could not believe that every bit was dull. I began to suspect the bolts were made of a hardened steel, and might require carbide bits. Called a mechanic friend who told me he wouldn't do it, but knew a shop that could weld on a small nut and take it out. (Visions of big bucks began dancing in my head.) But he also said his brother had just used reverse drill bits to solve a problem on his motor cycle. Figured I'd give it a try, and almost drove down the local AutoZone to buy their set of 5 reverse bits for $9.99. Then saw that Amazon had this set of 13 reverse bits for only 3 bucks more, and I've had good luck with some Neiko products. So I waited the two days for Prime delivery, and so glad I did. Right away, I noticed the Neiko 1/8" reverse bit was really removing some metal. I had to also try 9/64 and 5/32 before it grabbed into the chewed up bolt head, and easily turned it out. The second bolt which I hadn't bolloxed up with a Grabit and other drill bits, just wound right out on the first try. Boy was I happy. Problem solved. This method should work for the rare bolt that has broken off this way, not because the thread is frozen or welded in there like you find on exhaust manifolds and other places--that's a whole other story. But for a small bolt that broke off the way mine did, I swear by this product.
Scritto da: brian matthews
Four Stars
solid product
Scritto da: Kindle Customer
Rubbish
The drills where blunt and broke at first use. A total waste of money. I had to pay customs duty to the Post Office of £12.00 to even get the things!
Scritto da: David Horn
Five Stars
They do the job I wanted them for.
Scritto da: Roberto
Good
Good
Scritto da: David
Found them quite useless.
Most of the drills broke on the first try out. Found them quite useless.

Produits connexes

hot
DEWALT DW1923 Foret hélicoïdal à pointe pilote en oxyde ferreux doré 23/64 pouces
3.5/5

€ 26.30

DEWALT DW1923 Foret hélicoïdal à pointe pilote en oxyde ferreux doré 23/64 pouces
3.5/5

€ 26.30

hot
Foret YG-1 D2GP en acier rapide Gold-P Jobber, finition TiN, tige droite, spirale lente, 135 degrés, diamètre 3-15/16 x longueur 5-3/8 (lot de 1)
0.1/5

€ 21.83

Foret YG-1 D2GP en acier rapide Gold-P Jobber, finition TiN, tige droite, spirale lente, 135 degrés, diamètre 3-15/16 x longueur 5-3/8 (lot de 1)
0.1/5

€ 21.83

hot
Chicago Latrobe 69870 Série 2550 Série de forets en acier au cobalt avec boîtier en métal, revêtement TiN, pointe fendue à 135 degrés, pouce, 29 pièces, 1/16 - 1/2 par incréments de 1/64
2.4/5

€ 600.79

Chicago Latrobe 69870 Série 2550 Série de forets en acier au cobalt avec boîtier en métal, revêtement TiN, pointe fendue à 135 degrés, pouce, 29 pièces, 1/16 - 1/2 par incréments de 1/64
2.4/5

€ 600.79

hot
Big Horn 18960 # 9 perceuse conique à vis uniquement après-vente remplace W. L. Fuller 20100187
3.7/5

€ 22.97

Big Horn 18960 # 9 perceuse conique à vis uniquement après-vente remplace W. L. Fuller 20100187
3.7/5

€ 22.97

hot
Century Drill & Tool 26210 Foret Cobalt Pro Grade 5/32
3.9/5

€ 21.51

Century Drill & Tool 26210 Foret Cobalt Pro Grade 5/32
3.9/5

€ 21.51

hot
BOSCH CO14B Ensemble assorti de 14 forets à métaux Cobalt M42 14 pièces. Jeu de forets
3.7/5

€ 68.28

BOSCH CO14B Ensemble assorti de 14 forets à métaux Cobalt M42 14 pièces. Jeu de forets
3.7/5

€ 68.28

hot
Drill America - DWDMM16.00 Foret en acier rapide de 16,00 mm, série DWDMM
4.1/5

€ 39.84

Drill America - DWDMM16.00 Foret en acier rapide de 16,00 mm, série DWDMM
4.1/5

€ 39.84

hot
Viking Drill and Tool 5700 0 Type 240-UB 135 degrés Split Point Magnum Super Premium Jobber Foret (lot de 12), 1/4 1/4 in
4/5

€ 66.48

Viking Drill and Tool 5700 0 Type 240-UB 135 degrés Split Point Magnum Super Premium Jobber Foret (lot de 12), 1/4 1/4 in
4/5

€ 66.48

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu