Nicholson - 07851N Lime à main pour tour à angle long, modèle américain, coupe simple, rectangulaire, fine, longueur 12 12 pouces [ N/A ] pouces [ N/A ] pouces Fine 07851N

Brand:Nicholson

3.3/5

54.67

La lime à main pour tour à angle long Nicholson a une forme rectangulaire et des dents de modèle américain à coupe unique des deux côtés pour lisser et façonner les surfaces droites dans le travail au tour ou le limage d'établi. Les dents de modèle américain à coupe unique de la lime ont de longs angles pour un limage rapide avec une finition lisse lors de la finition, de l'affûtage et de l'ébavurage. Il n'a pas de dents sur les bords pour protéger les surfaces adjacentes. La soie peut être utilisée avec une poignée en option pour une prise sûre (vendue séparément). Les limes à main sont utilisées pour enlever la matière et lisser et façonner les pièces. Ils ont des dents de coupe orientées vers l'avant et coupent lorsqu'ils sont poussés sur une pièce fixe ou en rotation. Les dents à coupe unique ont des rangées simples coupées en diagonale sur toute la largeur de la lime. Les dents à double coupe ont deux séries de rangées coupées dans des directions opposées. Les fichiers de modèle américains ont trois degrés de grossièreté. La coupe grossière, également connue sous le nom de coupe bâtarde, convient à l'enlèvement efficace de matériaux lourds où la finition n'est pas un problème. Medium, également connu sous le nom de seconde coupe, offre un enlèvement de matière et une qualité de finition moyens. Fine, également connue sous le nom de coupe lisse, offre la finition la plus lisse. Les limes à motif suisses ont huit degrés de grossièreté, de 00 (grossier), 0 (moyen) et 1 à 6 (fin à fin), offrant une finition plus lisse et plus précise que les limes à motif américaines équivalentes. Nicholson fabrique des outils à main et des accessoires pour outils électriques. . La société a son siège social à Sparks, MD.

Tang à utiliser avec une poignée en option (vendue séparément). Dents à angle long pour un limage rapide avec une finition lisse. Dents à coupe unique pour la finition, l'affûtage et l'ébavurage, et aucune dent sur les bords pour protéger les surfaces adjacentes. Fichier de modèle américain pour l'enlèvement de matière de non-précision. Forme rectangulaire pour lisser et façonner les surfaces droites dans le travail au tour ou l'établi.
Brand Nicholson
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
Grit Type Fine
International Shipping This item can be shipped to select countries outside of the U.S.
Item Dimensions LxWxH 12 x 1 x 0.2 inches
Item model number 07851N
Manufacturer Nicholson
Product Dimensions 12 x 1 x 0.2 inches; 13.6 Ounces

3.3

13 Review
5 Star
61
4 Star
23
3 Star
6
2 Star
4
1 Star
6

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Larry
Looks good
It looks good but only time will tell if it lasts. There is no country of origin any place on file or package.
Scritto da: D. Michael McIntyre
Not very impressive at all
Other reviewers have pointed out that these come complete with some black gunk packed into the teeth from the factory, and the safe edges aren't really safe, because the way they're cut leaves enough residual tooth on the edges to cause serious damage to any surface. My file was no exception. A file card removed the black gunk easily enough, and a few passes over a grinding belt left the edges truly safe. It might not be the same as Nicholson from back in the day, but it still seemed like a pretty good lathe file. I was really eager to try a true lathe file, because I had recently watched a video imploring me to experience the difference. Well, color me not impressed. The first thing I used the file to do was deburr the edge on a cast-iron face plate I had just faced off. I just did a little search to see if there is some standing advice out there about filing cast iron, and I found absolutely nothing to convince me that I was an idiot for trying this. Well, the cast iron pretty much destroyed the teeth on the file in just a few passes. I don't have any easy way of adding a photo, because I'm writing from my desktop, and I take pictures with my phone, but the teeth look like I took a hammer to them, and just bashed them in They're warped and mangled beyond all use. That whole side of the file is almost totally worthless now, and it took just a few seconds to destroy it. I'm really not impressed at all. I'm going to keep looking for a good lathe file. This is barely serviceable. The one remaining good side seems to be doing okay on mild steel and brass.
Scritto da: Mark Oleszko
A pleasure to use!
A distinct pleasure to use a good quality, sharp file! It is a bit large for some of my projects, but perfect for others. I will need to shop for one about half size.
Scritto da: Tom1903
Works well enough
The file teeth aren't as well formed as my old "Made in USA" Nicholson files, but it works reasonably well. I've only used it on soft materials so far.
Scritto da: Robert A., Philadelphia, PA
Perfect file for use on a lathe
Well made and sharp file. 45 degree filing teeth work well for lathe work. Remember to always use a file handle to protect yourself from kickbacks.
Scritto da: Tad
Good file, but it is surprisingly large for the work I do
This is a good sharp file, designed specifically for lathe work. I don’t reach for it as often as I should because it really is too big for my 9x20 lathe. Be careful about skating off to the side, with the sharp slant of the teeth.
Scritto da: Larry K. Schweitzer
I have a 14" lathe and the length is fine for that
Works well, even on aluminum if you keep it a little wet with WD-40. I did damage one face using it on hard stainless steel. I have a 14" lathe and the length is fine for that.
Scritto da: Amazon Customer
Excellent file for lathe work
I bought both the course and fine 14 inch lathe files. Excellent quality. It's so much more satisfying using one of these on a lathe rather than a 10 or 12 inch hand file. Single cut leaves a fine finish. Get the size 00, 5-3/4 inch Nicholson Metal Ferruled Wooden File Handle. Fits perfect and has a nice traditional look and feel.
Scritto da: Kenneth
Not as pictured
I was looking for a straight sided lathe file this is tapered and quite course. The sides of the file are not smooth either; there is overcut on the sides causing it to gough the adjacent surfaces when breaking edges on the lathe.
Scritto da: RB
Seems good
Worth the price
Scritto da: Amazon Customer
Order this twice and both times received the wrong style of file
Both times received a rough cut half round file not a lathe file at all
Scritto da: mr salty
Five Stars
Nice- as listed lathe file.
Scritto da: Mohammad Keshoofy
Five Stars
works great.

Produits connexes

hot
Forney 70321 Lime bâtarde plate 25,4 cm
2.8/5

€ 37.87

Forney 70321 Lime bâtarde plate 25,4 cm
2.8/5

€ 37.87

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array