Nilight Lot de 3 bandes lumineuses de lit de 152,4 cm 270 LED avec interrupteur marche/arrêt pour camionnette, SUV, camping-car, bateau, 2 ans de garantie

Brand:Nilight

3.6/5

39.29

Large application : peut être largement utilisé pour la lumière d'auvent de camping-car, la lumière de lit de camion, la lumière LED de marchepied, la lumière de porte latérale, etc. Conception flexible et durable : la bande lumineuse est dans un boîtier étanche IP67, protège bien la bande contre les gouttes de pluie, la saleté et le sable. super durable et flexible avec une durée de vie allant jusqu'à 30 000 heures. Raccordement électrique facile et sûr : livré avec un câble répartiteur, un fusible à lame en ligne de 5 A, un interrupteur marche/arrêt, un câble d'extension, du matériel de montage pour tous vos besoins de câblage. Veillez toujours à la sécurité du circuit pour votre conduite sur route. Installation rapide : Décollez et collez, le ruban adhésif avec un rehausseur d'adhésif résistant aux ongles pour une forte adhérence. Vous pouvez également ajouter le matériel de montage inclus pour plus de sécurité. Luminosité impressionnante : la bande lumineuse 3PCS comprend 270 puces LED PCS 5050-SMD, émet une lumière blanche super brillante 3900LLM 6000K pour éclairer l'ensemble de votre lit de camion.

Aucune unité disponible
Large application : peut être largement utilisé pour la lumière d'auvent de camping-car, la lumière de lit de camion, la lumière LED de marchepied, la lumière de porte latérale, etc. Conception flexible et durable : la bande lumineuse est dans un boîtier étanche IP67, protège bien la bande contre les gouttes de pluie, la saleté et le sable. super durable et flexible avec une durée de vie allant jusqu'à 30 000 heures. Raccordement électrique facile et sûr : livré avec un câble répartiteur, un fusible à lame en ligne de 5 A, un interrupteur marche/arrêt, un câble d'extension, du matériel de montage pour tous vos besoins de câblage. Veillez toujours à la sécurité du circuit pour votre conduite sur route. Installation rapide : Décollez et collez, le ruban adhésif avec un rehausseur d'adhésif résistant aux ongles pour une forte adhérence. Vous pouvez également ajouter le matériel de montage inclus pour plus de sécurité. Luminosité impressionnante : la bande lumineuse 3PCS comprend 270 puces LED PCS 5050-SMD, émet une lumière blanche super brillante 3900LLM 6000K pour éclairer l'ensemble de votre lit de camion.
Brand Nilight
Brand ‎Nilight
Color White
Color ‎White
Country of Origin ‎China
Cover Included 3PCS 60” LED Truck Bed Light Strip
Cover Included ‎3PCS 60” LED Truck Bed Light Strip
Customer Reviews 4.6 4.6 out of 5 stars 3,136 ratings 4.6 out of 5 stars
Exterior ‎Painted
Fit Type Universal Fit
Fit Type ‎Universal Fit
Item model number ‎TR-09
Item Weight ‎1.59 pounds
Light Source Type LED
Light Source Type ‎LED
Manufacturer ‎Nilight
Manufacturer Part Number ‎TR-09
Model ‎TR-09
Number of Pieces 3
Number of Pieces ‎3
Package Dimensions ‎9.72 x 8.23 x 2.09 inches
Position Left
Position ‎Left
Remote Control Included? No
Remote Control Included? ‎No
Vehicle Service Type SUV, Truck, Pickup Truck
Vehicle Service Type ‎SUV, Truck, Pickup Truck
Voltage 12 Volts
Voltage ‎12 Volts

3.6

13 Review
5 Star
77
4 Star
12
3 Star
6
2 Star
2
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Chandler Hasemeyer
2018 Ram 2500 camper shell
Installed on 2018 Ram 2500 crew cab. The adhesive is just ok. Recommend using 3M double sided foam tape or Loctite caulk. Finding 12V constant power supply in the rear on my truck proved impossible. I ended up running the lines all the way to the main fuse box under the hood, using a fuse tap onto a 5A constant power fuse. Works super well, anytime I need light in the truck bed I’ll hit the small button switch I mounted just inside the tailgate on the driver side of the bed. Uses so little power I can stay lit for hours. For $30 and a couple hours of fishing wire for power, very pleased with it!
Scritto da: MulliSC
Added Lights To SnugTop Shell - 2015 Toyota Tundra
Wanted more lighting in my Toyota Tundra SnugTop shell as the dome light does not light up the entire length of the bed/shell. I wanted to connect this to my dome light already wired into the shell. Easy peasy, except when you mis-wire the connection to the LEDs and blow several fuses and get smoke to come out of the dome light. Whoops. Here I should mention that I have an electrical engineering degree. It was a purely stupid mistake on my part. Burnt up the original dome light so had to replace that as part of this upgrade. See my review of that good dome light if you need one. Before I wired things up, I added velcro to the back of the strip. About 5 locations with 2-3 inches of velcro. I wanted to see if the strips with Velcro would stay put attached to the carpet on the roof of the shell. It is very low pile carpet covering the entire interior of the shell that is very common for these shells. My plan was to ride around with them attached to see if they held. They did not. The disconnect happened between the adhesive of the LED strips and the adhesive of the velcro. My solution was to put a strong epoxy along the backs of the strips and the velcro. While I was at it, I added velcro to most of the length of the strips. That worked and is still working great about 3K miles later. I wired the strips into the dome light but only for the power, not to work with the auto on/off of the dome light. I hid the switch above the shell's access window/door that is easy to get to and turn on when needed, even when the car is not running. (direct power to the battery). You will notice in the pictures I only have two strips hung. That was plenty of light in the shell. The other strip is available to use where I want with it's plenty long cord. I can plug it into the attached strips and use it outside the truck. Good for extra light when camping, as I have a tent that attaches to the back of my truck, so plenty of light in the tent. See my review of that awesome, Napier Truck/SUV tent. The extra light is great and was easy to rig it up, especially after I figured out what a dumbaxx mistake I made with the wiring! Get these and add some light somewhere. More importantly, have fun!
Scritto da: kal-el
Best money I have spent!!
I have a 2020 Ram with a truck topper and decked drawer system. The decked system almost covers up my factory bed lights. I took a chance on these, and man are they bright, almost to bright, nah they are great easy to install and easy to hide. If you want to see in your bed these are a must!! Great product!!!
Scritto da: Theodore davis
They work great and were relatively easy to install
Many of the negative reviews I read mentioned the adhesive strip not sticking well, and it doesn’t. That’s not a bug, it’s a feature. The adhesive acts as a second hand for the installer. The adhesive helps to hold long enough to guide and clip the lights. Grant it I have only installed these two weeks ago so longevity may affect my review later and I will update my review as time goes on. But these lights are a much higher quality than what I actually expected for the price. They are brilliant, they are bright, and they were pretty easy to install. I recommend tapping one of your rear taillights for power, as you presumably will have Bly be using them when you headlights are already on. Be sure not to accidentally tap the reverse light in the fixture because you won’t have power unless you are in reverse. No matter how you tap or where you tap for power, you will need either a multi meter (which are expensive) or just get a cheap hot wire indicating tool, I got mine at an auto parts store for $9. The self tapping metal screws make installing pretty simple but don’t over tighten because the clamps are soft like silicone which is also on purpose. I gave this a 5 star because price for quality great. I’m just waiting to see how long they last to report back here. I hope this helps the reader of this review.
Scritto da: Alex
Awesome lights
Exactly what I needed, fit snug as a bug under the bed side rail, bright, had to modify the wiring to keep everything hidden and routed properly but overall very pleased
Scritto da: Kelly bouman
Bright….but you’ll have to drill holes
It looks really good and it is bright! But you’ll have to drill holes if you want it to stay. Kit comes with brackets and self tapping screws
Scritto da: Tyler
Extremely bright and true white
I love this product so much, it is a true white compared to the blue or pink off shade of cheaper brands. It is easy to install and is probably my favorite led step out there. I used it instead of my old underglow to give my entire truck a glow
Scritto da: isaac
Love them!
They take a while to install it you want to do it cleanly. But if you put in the effort they look fantastic. I really like all the different settings and the different color options. And the remote works well and also works from quite a surprising distance!
Scritto da: Casey
Lights in truck Box
Works well so far. Looks good. Had it installed by shop. No issues
Scritto da: G. Bandura
Happy with them
Nice and bright and no issues after almost a years use
Scritto da: M
Bedlight strip
Easy to install. Exactly as described. Really bright. Easy to cut to size.
Scritto da: Todd F.
You need longer power supply wire and your own wiring eyelets
The only bad thing is you need double sided body tape for the switch
Scritto da: Jim
Well built
I’m using these on my overlander for awning, annex and tent lighting. Good quality and easy to set up

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array