Orbit 34784 Raccord de réparation PVC-Lock Flex, 3/4, 3/4"

Brand:Orbit

3.5/5

35.06

Du fabricantOrbit est la première entreprise d'Amérique du Nord pour l'arrosage résidentiel. Avec une présence dans plus de 180 pays et 6 continents, nous offrons l'écosystème le plus complet de solutions pour les robinets de tuyau, les tuyaux, les extrémités de tuyau, le sous-sol, l'égouttement, le brouillard et la protection de la cour. Depuis plus d'un demi-siècle, nous sommes à la tête de l'industrie en matière de solutions innovantes, accumulant plus de 100 brevets actifs et de nombreux prix de reconnaissance de l'industrie. De PVC-Lock, Blu-Lock et Drip-Lock, qui sont un moyen extraordinairement rapide de connecter les tuyaux d'arrosage et les tubes d'égouttement, à nos contrôleurs intelligents B-hyve les plus vendus et à la pointe de la technologie, nous avons modernisé l'industrie, établi le standard pour les meilleures pratiques d'irrigation résidentielles et a rendu l'arrosage extérieur efficace pour les ménages du monde entier. Hydro-Rain est l'homologue commercial et agricole de pointe d'Orbit, avec des offres BUILT FOR SPEED conçues spécifiquement pour les entrepreneurs et les producteurs professionnels. Ensemble, Orbit et Hydro-Rain forment une unité commerciale au sein de la division Gardena du groupe Husqvarna, comprenant collectivement le plus grand fabricant d'arrosage résidentiel au monde. Parce que garantir l'accès à une eau douce sûre pour les communautés est une priorité mondiale, nous sommes fiers d'affirmer notre engagement à fournir un écosystème complet de solutions intelligentes, couvrant les applications DU ROBINET À LA FERME, alors que nous poursuivons continuellement la vision de CHANGER LA MANIÈRE D'EAUER DANS LE MONDE .

Aucune unité disponible
Pour une pression non constante, non principale, enfouissement direct, irrigation extérieure à l'eau froide uniquement. 18 pouces de longueur. Ne restreint pas ou ne comprime pas lors de la flexion. Idéal pour les angles irréguliers ou les obstructions. Solution de réparation ultime : permet de connecter rapidement un tuyau mal aligné.
Customer Reviews 4.4 4.4 out of 5 stars 283 ratings 4.4 out of 5 stars
Item model number 34784
Item Weight 8 ounces
Manufacturer Orbit
Product Dimensions 17.75 x 1.75 x 1.75 inches

3.5

8 Review
5 Star
71
4 Star
13
3 Star
7
2 Star
4
1 Star
5

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Robert J. Gerndt
Can be glued in and used for constant pressure
The design of "O" Rings and Shark Bite is for convenience, but a better design would be simply to have standard PVC glued joints and then take away the stipulation of non-content pressure.....which means of course it is designed for use downstream of solenoid valves on sprinkler systems, which see pressure only when that zone is on. I called and was told I could glue it. It is rated for 100psi. Glueing was not a problem. And of course, no leaks and no worry of leaks on my constant pressure 45 psi line.
Scritto da: Eric Snow
Worked good.
Much better than sticking severe elbows and couplings together.
Scritto da: Kindle Customer
Poor instructions
Written installation instructions inadequate. I viewed a Youtube video on installation and followed it exactly but still had a leak on one end. The instructions say nothing about how to stop a leak after installation. I guessed the problem was incomplete seating on the leaking end. I fitted Channel Lock pliars on the connection at the leaking end and hammered the pliars toward the pipe being connected until that end properly seated. Turned on the water (40 PSI) and no leak. BTW, I had also purchased the Orbit release tools and pipe bevel in case I had to reinstall the flex repair pipe but thankfully l did not have to use it.
Scritto da: pwcwa
Had a had a leaking joint
Had a leaking right angle joint. Able to access line to and from for over 18 inches. Cut out joint and appropriate amount and unit fit right in with no problem and no leak
Scritto da: Steven S.
Works great but needed 1” for 3/4” PVC
Use OD measurement for correct sizing. Purchased 3/4” connector for 3/4” ID pipe. Connector was same OD size as pipe I was trying to connect to. My existing pipe was too large to slip into Orbit connector. Returned and bought 1” connector which went on easy as directed without any leaks.
Scritto da: Gary Shriver
Love It!
I use to use the ones that slid in and out but this was awesome! Kinda wished it was flexible enough to turn a complete circle to do a short run but it didn’t. Easy fix anyway. Glad I found this.
Scritto da: Hazard Area
Worked Great
This 3/4" item bends 90 degrees and easily. Don't know what others are talking about -- maybe 1" is very stiff. I roughly measured, cut off one end, shoved on the unit after wetting pipe with soap water and deburring, measured carefully for the final cut, and did the same, and both ends went on smooth and easy. No leaks although I roughed up the pipe a bit digging up the dirt, but used very fine sandpaper to remove any ridges, and if there is a leak, it is super slow. I also bought the Orbit 35809 PVC Lock Release Tools that had a deburring tool, and three lock release tools for different size pipes, just to have on hand if I screwed up. The deburring tool worked fine with no skipping and roughing up the edge.
Scritto da: Barry
Great repair item
Allowed me to repair a pool leak without having to call the expensive pool company.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array