Orbit 35809 Outils de déverrouillage en PVC, mixte

Name: Orbit 35809 Outils de déverrouillage en PVC, mixte
Brand: Orbit
SKU: 0046878358096
Price: 26.67 EUR
Availability: InStock

Brand:Orbit

3.4/5

€
26.67

Du fabricantOrbit est la première entreprise d'Amérique du Nord pour l'arrosage résidentiel. Avec une présence dans plus de 180 pays et 6 continents, nous offrons l'écosystème le plus complet de solutions pour les robinets de tuyau, les tuyaux, les extrémités de tuyau, le sous-sol, l'égouttement, le brouillard et la protection de la cour. Depuis plus d'un demi-siècle, nous sommes à la tête de l'industrie en matière de solutions innovantes, accumulant plus de 100 brevets actifs et de nombreux prix de reconnaissance de l'industrie. De PVC-Lock, Blu-Lock et Drip-Lock, qui sont un moyen extraordinairement rapide de connecter les tuyaux d'arrosage et les tubes d'égouttement, à nos contrôleurs intelligents B-hyve les plus vendus et à la pointe de la technologie, nous avons modernisé l'industrie, établi le standard pour les meilleures pratiques d'irrigation résidentielles et a rendu l'arrosage extérieur efficace pour les ménages du monde entier. Hydro-Rain est l'homologue commercial et agricole de pointe d'Orbit, avec des offres BUILT FOR SPEED conçues spécifiquement pour les entrepreneurs et les producteurs professionnels. Ensemble, Orbit et Hydro-Rain forment une unité commerciale au sein de la division Gardena du groupe Husqvarna, comprenant collectivement le plus grand fabricant d'arrosage résidentiel au monde. Parce que garantir l'accès à une eau douce sûre pour les communautés est une priorité mondiale, nous sommes fiers d'affirmer notre engagement à fournir un écosystème complet de solutions intelligentes, couvrant les applications DU ROBINET À LA FERME, alors que nous poursuivons continuellement la vision de CHANGER LA MANIÈRE D'EAUER DANS LE MONDE. .

Montant

Ajouter au panier Acheter maintenant

EAN: 0046878358096

Catégories Outils et amélioration de la maison, Sets de batteries et chargeurs, Outils à main, Sets d'outils,

Les raccords qui ont été exposés à une pression d'eau excessive et/ou à des coups de bélier peuvent être difficiles à retirer. Utilisé pour installer des systèmes de gicleurs en PVC - conçus pour être utilisés avec le PVC Schedule 40, Schedule 80 et Class 200. Fonctionne sur les raccords PVC-Lock de 1 pouce et 3/4 pouce. Libère les raccords PVC-Lock du tuyau en PVC.

Brand	Orbit
Color	Mixed
Exterior Finish	PVC
Item Dimensions LxWxH	1.75 x 3.9 x 7.25 inches
Item model number	35809
Item Weight	0.01 Ounces
Manufacturer	Orbit
Material	Pvc
Number of Pieces	1
Product Dimensions	1.75 x 3.9 x 7.25 inches; 0.01 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Shemers

3/4" works great, 1/2" not so much

I used the 3/4" fittings to pressure test a pvc assembly that was going to be hard to get to once installed. I used a cap on one end and a threaded adapter on the other. I bought a hose adapter that fit on the threaded end so that I could pressurize it. After testing I was able to remove the cap and the threaded adapter using the removal tool. The connectors went on and came off easy. They don't leak at all. That's the good news. The bad news is that when I tried something similar with 1/2" pvc the connector went on and sealed just as well, but they do not come off very easily. I was able to get the removal tool all the way in, but the little metal teeth in the connector were still dug in to the pvc. I was able to get the connector off by twisting and pulling, but it chewed up the end of my pipe. I have tried multiple fittings and 2 sets of release tools with the same result. I have also tried putting the connector on and removing immediately without ever pressurizing to see if the problem was from over pressurizing. It still scored the end of my pipe. I was hoping that I could use these to make a temporary seal that I could latter remove and glue a permanent connector in its place. With the pipe so badly scored, I think I will have to cut off the end first to get a good glue seal. I have not tried the 1" size yet.

Scritto da: S.S.

Very Useful Tool!

Set up a backup, satellite sprinkler system from the spigot in the backyard. When disconnecting that system in the late fall, this tool makes it a cinch. slide down into the connector and turn and you're disconnected in seconds. Everything reconnects with no issue, either. Worth the minor investment to save a ton of time.

Scritto da: LLP

Must have for Orbit pvc connectors

We used a few of the Orbit 3/4 quick couplers for non pressure pvc line. They are very easy to use and seem to work great. The Orbit release tool is a pretty much must have if you ever plan on taking them apart again. Only used the 3/4 tool so far. The tool is easy to use and releases the connecting barbs without any trouble

Scritto da: Hazard Area

Worked Great

I was fixing a 3/4" underground pipe with the 18" locking flexible pipe sold on this site, and wanted these tools in case I made a mistake and wanted to remove the flexible pipe. I didn't have to use the lock release took, but did use the deburring tool and it worked like a champ. What sold me on this kit is that they threw in the deburring tool with the lock release tools, which I thought was great.

Scritto da: 1 Bama Boy

Get the job done!

Perfect tools for the job. Worked on 3/4 PVC irrigation plumbing. Had my leak fixed in 15 minutes.

Scritto da: Theguyoverthere

Works great

I messed up and tried using a PVC Lock Slide to patch a puncture in my black 1 inch sprinkler line. It didn't work at all. The Orbit 35809 PVC-Lock Release tool set worked great and as advertised. It take a bit of practice to finagle it all the way into the lock slide side, but once pushed all the way, the pipe came right out. Now I can return the wrong part and get the correct one.

Scritto da: Judy Caunter-Crawford

Consider two sets of you need to replace an manifop

They work great. Use it to attach manifolds so we do not need to cut pipe when replacing manifolds. But we needed two to release manifold since the pipes are inches away from each other

Scritto da: S Moore

Do not mistake for eco-lock release tools

I mistook these for eco-lock release tools... not compatible.

Scritto da: Groot

Built with cheap plastic around the extremely sharp flimsy tin/stainless ...

Built with cheap plastic around the extremely sharp flimsy tin/stainless they use to slide into the fitting. For the most part, I ended up cutting off the existing fitting and putting a new one on rather than using these. The plastic started peeling off after first use.