Ordinateur de vélo 8 fonctions Planet Bike Protege 8.0

Brand:Planet Bike

3/5

60.65

DESCRIPTION DU PRODUIT Ordinateur de vélo Planet Bike Protege 8.0 À PROPOS DE PLANET BIKE En novembre 1996, Planet Bike a été fondée à Madison, Wisconsin. À bien des égards, Planet Bike a commencé comme une expérience sociale qui s'est consacrée à faire des affaires d'une manière différente. Au lieu d'être juste une autre entreprise qui développe et vend des produits avec comme objectif final le profit, Planet Bike voulait aider à apporter des changements positifs pour les gens, leurs communautés et l'environnement. Bien qu'il s'agisse d'une simple machine, les gens de Planet Bike ont toujours cru que le vélo avait un grand potentiel pour aider à améliorer le monde et la vie de ses habitants. Dès le début, ils ont adopté un objectif d'entreprise alternatif qui cherche à aider plus de gens à faire du vélo en faisant des communautés des lieux plus conviviaux pour les automoteurs. En reversant 25 % des bénéfices de l'entreprise à des causes qui promeuvent et facilitent l'utilisation du vélo, Planet Bike espère avoir un impact. Au-delà des expériences sociales, Planet Bike est né du cœur d'un cycliste dans le but de fabriquer des accessoires de vélo innovants, de haute qualité et pratiques. En termes simples, ils s'efforcent de concevoir et de développer les meilleurs produits de vélo au monde. Au cours de la courte histoire de dix ans de l'entreprise, ils ont apporté d'importantes innovations de produits au sein de l'industrie du vélo. Les avancées incluent l'ordinateur à 4 lignes qui est maintenant un standard dans l'industrie et la première lampe HID autonome au monde. Pas mal pour une entreprise qui a commencé il y a dix ans comme une opération d'un seul homme. Aujourd'hui, bien qu'elle soit encore une petite entreprise, Planet Bike continue d'évoluer et d'améliorer sa gamme de produits dans le but de toujours s'efforcer de créer des accessoires qui facilitent la conduite de leurs vélos. Depuis 1996, le soutien financier de Planet Bike au mouvement cycliste populaire s'élève à 500 000 $. D'ici 2010, ils se sont fixé pour objectif de donner 1 million de dollars à des organisations qui se consacrent à faire de l'Amérique un endroit plus convivial pour les cyclistes.

Comprend un kit de montage de fil de 82 cm pour la roue avant. L'aimant s'adapte à des rayons plats jusqu'à 4 mm. Convient aux guidons de 25,0 à 31,8 mm. L'écran LCD MacroMonitorTM à 4 lignes affiche jusqu'à 5 éléments de données en un coup d'œil. Vitesse actuelle, comparateur de vitesse, temps de trajet, distance parcourue, double odomètre (pour 2 tailles de roues), vitesse moyenne, vitesse maximale et horloge. Testé pour garantir la qualité et la durabilité. Fabriqué avec des matériaux de haute qualité. Fabriqué selon des méthodes durables.
Battery Cell Composition ‎Alkaline
Brand Planet Bike
Brand ‎Planet Bike
Brand Name ‎Planet Bike
Color White
Color ‎White
Country of Origin ‎China
Customer Reviews 4.0 4.0 out of 5 stars 112 ratings 4.0 out of 5 stars
Display Type ‎LCD
Human Interface Input ‎Buttons
Included Components ‎Planet Bike Protege 8.0 Bike Computer
Item Dimensions LxWxH 4 x 4 x 4 inches
Item Dimensions LxWxH ‎4 x 4 x 4 inches
Item Package Dimensions L x W x H ‎4.2 x 2.8 x 1.7 inches
Item Weight 0.2 Pounds
Item Weight ‎0.2 Pounds
Manufacturer ‎Planet Bike
Material ‎Plastic
Model Name ‎Planet Bike Protege 8.0 Bike Computer
Mounting Type ‎Handlebar Mount
Number of Items ‎1
Outer Material ‎Aluminum
Package Weight ‎0.2 Pounds
Part Number ‎8001
Screen Size 4 Inches
Screen Size ‎4 Inches
Sport Type ‎Cycling
Suggested Users ‎Unisex-adult
Warranty Description ‎Limited lifetime

3

6 Review
5 Star
61
4 Star
12
3 Star
7
2 Star
4
1 Star
15

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: JimM
Good, but not perfect
I used this on a couple of Bacchetta Giro recumbent bikes (20 and A26). The wire to the sensor is just long enough for this. It might get a little tight if you are tall and have your handlebars set high, but I have a few inches to spare. I like this because I can see all of the parameters I want to monitor on one screen: current speed, trip distance, average speed, trip time, and maximum speed. I have no use for displays that scroll or cycle through readings. I also prefer a wired system like this so that interference and connecting are not an issue, as well as avoiding extra batteries and extra battery drain. There are a few issues I have with this, most of them minor. 1) The "button" mechanism where you slide the computer in its mount to change the display is not great. It is a little awkward compared to a normal button. It can also get stuck, so that a push to change the display turns into a "push for 3 seconds to clear the trip data" instead. Since it always comes out of sleep mode in the first display, and I always want to use the third display, this gives me several opportunities per ride to clear my trip odometer and statistics. 2) It appears that the time it takes to detect that I have stopped is not removed from the trip statistics. This means that average speeds are a little lower if you make many stops. 3) The display update interval is about three seconds. I know that I could have written the firmware to get this down to one second or less. This is fairly minor, but can be annoying. 4) A second one of these that came with a bike I bought has trouble with the entire computer being reset unexpectedly. This doesn't happen often, and may be associated with getting wet; I haven't completely figured it out yet. A fresh battery did not solve it. 5) On both of my computers, the display often has a dark blemish at the bottom, probably at the ground connection. This is cosmetic, as it does not obscure the characters on the display. I think it may only happen for a while after powerup. 6) The setup routine is tedious and prone to errors. This is probably unavoidable, and should be rarely encountered. 7) Data and calibration are not saved through a battery change, so you need to be very sure to save your calibration setting and to write down your odometer reading before changing the battery. In the case of my second unit which has reset problems, this means that chunks of the odometer reading are lost because it resets without warning. Overall I can recommend this, and given the lack of options in wired computers, I would probably buy it again.
Scritto da: M. Meyer
4-line display is excellent; button design less-than-optimal
The primary selling feature of this computer is the unique multiline display. I love having all relevant info available at one glance without having to mess with buttons while riding. The text seems large enough to read at a glance. I didn't see other products with this design, so I definitely recommend the product for this feature. The only shortcoming in this product's design is that the function button (used to reset trip meters or switch the 4th display line between clock, averages, etc.) is integrated into the housing such that you push the entire casing forward to activate it. What that means is that the entire computer literally slides in the mount. The rubbing plastic action isn't particularly smooth, and I wish they had just put a regular button on the lower bottom edge of the housing instead. This strange design does leave the impression that the computer is not held as securely as one would like, although I have not observed any danger of the computer working loose from the mount during my 1 month of road/path riding. So, unless you find another product with as good a display, I would not consider this shortcoming a deal-breaker.
Scritto da: Excptn28
Reliable and convenient functions
Have one of these on another bicycle. Tried other models but they had problems registering (for a road bicycle). This model has worked steadily for over 800 miles total. I like being able to see the total distance traveled and the trip time without having to change modes, and being able to read those numbers while moving.
Scritto da: Tonny García Viñas
The unit resets very easy, 2
Problems; 1. The unit resets very easy, 2. the display is not very intuitive, most resets to "0" instead of blank witch is easier to read. 3. The sensor should come with tw levels of raisers to accommodate mounting on MTB and road bikes i had to reduce the gap between the sensor and the magnet 3 times before it started working, still i don't know if the distance is correct. 4. No back-light making the unit impossible to read at night Pro; 1. Great price. 2. Lots of metrics; you get distance, time, speed, max speed, average speed, a arrow pointing up or down to indicate if you're traveling above or below the average speed, time of day ( always on ) odometer ( total distance ) adjustable to all wheels circumference. 3. built is good and design is appealing, it doesn't look out of place or cheap.
Scritto da: Jennifer P.
The new one is great, just programmed it and slid onto the previous ...
This was a replacement for one that stopped functioning after 3 yrs. The new one is great, just programmed it and slid onto the previous mount. Very fast delivery on an international shipment.
Scritto da: david w zimmerling
Five Stars
works like a treat.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array