Outil de coupe Champion BlackGold XG12-39/64 Silver & Deming 1/2 Shank Drill : MADE IN USA

Name: Outil de coupe Champion BlackGold XG12-39/64 Silver & Deming 1/2 Shank Drill : MADE IN USA
Brand: Champion Cutting Tool Corp
SKU: 0846035046053
Price: 43.31 EUR
Availability: InStock

Brand:Champion Cutting Tool Corp

3.6/5

€
43.31

DESCRIPTION DU PRODUIT Outil de coupe Champion Les forets Brute Platinum XL12 Silver & Deming sont les meilleurs forets hélicoïdaux pour les professionnels qui cherchent à percer des trous de grand diamètre dans des matériaux durs. Ils sont fabriqués aux États-Unis en acier rapide de qualité supérieure pour un perçage plus rapide et une durée de vie plus longue. Le point de partage 118* permet à l'opérateur de percer des trous précis et précis. Les perceuses XL12 sont idéales pour les services de maintenance, les ateliers d'usinage, les ateliers automobiles et d'autres industries. DU FABRICANT Les perceuses Champion Silver et Deming sont largement utilisées dans les services de maintenance, les ateliers d'usinage et dans les environnements de construction. Les perceuses Silver et Deming sont parfaites pour les perceuses et perceuses portatives où la capacité du mandrin est de 1/2 pouce.

Aucune unité disponible

EAN: 0846035046053

Catégories Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Pièces et accessoires pour perceuses, Mèches à torsion, Mèches Forets, Mèches Jobber,

Outil parfait pour les services de maintenance, les ateliers d'usinage, les ateliers automobiles et d'autres industries. Idéal pour percer l'acier, la tôle d'acier, l'acier inoxydable, la fonte, le titane, les alliages nimoniques, le manganèse et d'autres matériaux résistants. Tige réduite 1/2 plate pour une utilisation dans les perceuses portatives ou les perceuses à colonne où la capacité maximale du mandrin est de 1/2. Le traitement de surface BlackGold retient le lubrifiant pour un perçage plus lisse et plus long. Percez plus vite et pénétrez plus précisément grâce au point de partage 118*. Les perceuses BlackGold Silver & Deming à usage intensif ont une résistance et une durabilité supérieures à celles des perceuses S&D standard.

Brand	Champion Cutting Tool Corp
Brand	‎Champion Cutting Tool Corp
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 598 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Platinum,Silver
Finish Type	Platinum,Silver
Finish Type	‎Platinum,Silver
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1 x 1 x 1 inches
Item Dimensions LxWxH	‎1 x 1 x 1 inches
Item model number	‎XG12-39/64
Item Package Quantity	‎1
Item Weight	‎5.6 ounces
Manufacturer	‎Champion Cutting Tool
Material	High Speed Steel
Material	‎High Speed Steel
Measurement System	‎Inch
Part Number	‎XG12-39/64
Product Dimensions	‎1 x 1 x 1 inches
Shank Type	Straight
Shank Type	‎Straight
Size	‎XG12-39/64
Surface Recommendation	‎Stainless Steel,Steel
Tool Flute Type	‎Straight

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Darian Boghosian

Works great

I purchased this to drill holes through a medium duty truck frame and it worked excellent.

Scritto da: Tri Guy

Large bit

Bought this bit to install a gasket into my smoker. The hole was cut but was not necessarily the cleanest cut. I was able to get it installed and then used heat caulk. The bit did not show any wear after the drilling of my smoker so it appears to be sturdy.

Scritto da: Questors

Just What I Needed

I bought this for a simple computer case modification. I do not regret the decision to buy it. The good: The bit is sharp and in two uses has maintained its edge. I am not an expert on metals and engineering, but it seems to be a quality item. Thus far both times it has been used, the bit has cleanly cut through the thick aluminum of my custom made case. It comes with its own bit holder for storage rather than just a blister pack. I found this convenient for placing in the tool box. The size of the bit and the holder make it easy to find in the toolbox later. The smaller diameter shank enables this bit to be used on smaller drill chuck sizes though as any bit, will not fit all chucks. Ensure your drill can hold this bit before you purchase. It is a large diameter bit, even though the shank is smaller, it is also still a fairly large diameter. What could be better: I am not a metallurgist, so unless there could be some improvement there, I can find nothing that could make this a better product than it is. Readers should note, all drill bits dull after a time of use, but most can be sharpened.

Scritto da: sciguy

Cannot recommend despite being made in USA!

The two I got were strange bits (both 21/32", one a free replacement from Amazon.) I wonder about quality control, it almost seems as if there is something wrong with the geometry of the bit. They feel sharp, and the first few holes drill fine, but after

Scritto da: Tony

Good bye China. Hello USA

Another China vs. USA. I paid about the same for this single 3/4” US made bit, a I paid for a six bit Chinese set. Difference is, the USA made bit perform flawlessly in all materials, including hard steel. The Chinese ones may be good for wood and plastics, but not serious metal work. I buy the bit size I need, and gladly pay the “Champion” price, knowing I will be satisfied, instead of getting a junk set I can’t use.

Scritto da: Ki

The bit might need to be heat treated so the bit won't chip

The bit was OK but while drilling on one of the cutting edges there was a small Pease that chip off it still cut but the bit might need to be heat treated so that will not happen.

Scritto da: DLC

So far so good

Very sharp bit, has performed flawlessly so far.

Scritto da: jonathan ml

Awesome

Drill everything just like butter. Highly recommend. Used it to drill in my truck frame to install a front mounted hitch.

Scritto da: John Swanson

Went through my F350 frame like butter ...

Went through my F350 frame like butter ... gonna keep this one safe ... Thank God for Home_Made AMERICAN Tools !!!

Scritto da: Amazon Customer

This drill bit is good Quality.

I ordered the 17/32 drill bit to do a small job. It came sharp and looks to be of good quality. it did the job I needed and stayed sharp through all the holes.

Scritto da: Al

You get what you pay for

Awesome american made drill bits, they work great

Scritto da: Tommy

Quality not cheap

Drill about 30-40 hole in 5/8 steel with hand drill before i chipped the corner, my fault .Still cut .I was impressed. Would by again