Penn F93 Series Contrôle du volume d'air pour puits profonds, s'ouvre en cas de chute de pression, pas de robinet de jauge, pas de soupape de décharge de pression F93A-1C

Brand:Johnson Controls

3.7/5

123.04

Les commandes de volume d'air de la série F93 pour puits profonds contrôlent la quantité d'air dans les réservoirs de stockage d'eau résidentiels des systèmes d'eau de puits profonds. Les puits profonds ont plus de 25 pieds (7,6 m) de profondeur. Les commandes de la série F93 maintiennent automatiquement le volume d'air dans les réservoirs de stockage des systèmes d'eau de puits profonds en permettant à l'air de s'échapper du réservoir et dans la pièce environnante lorsque le niveau d'eau dans le réservoir baisse (augmentation du volume d'air). Les commandes de puits profonds F93 ouvrent la vanne d'air en cas de baisse du niveau d'eau du réservoir, purgent l'excès d'air du réservoir à des pressions allant jusqu'à 100 psig (690 kPa). Le F93H est doté d'une soupape de décharge de pression minimale pour éviter d'abaisser la pression du réservoir en dessous de 25 psig (172 kPa). Utilisez ce modèle pour les applications où l'eau peut être rapidement évacuée. Reportez-vous au bulletin de produit des commandes de volume d'air de la série F93 pour les puits profonds (référence 24-7664-3000) pour des informations importantes sur l'application du produit.

Le corps robuste en Noryl (thermoplastique haute performance) résiste aux dommages mécaniques et à la corrosion.
Country of Origin USA
Item model number F93A-1C
Manufacturer Johnson Controls, Inc
Package Dimensions 10.2 x 3.94 x 1.73 inches; 7.05 Ounces

3.7

8 Review
5 Star
79
4 Star
12
3 Star
4
2 Star
2
1 Star
3

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: JS
Water tank switch
Fit great no issues
Scritto da: Beaty Wade Tharp
Fine valve
This style of valve is just fine for its function. My only wish is some ingenious engineer would figure out a way for the air vent portion of the valve to not get plugged up. I.e. some sort of wiper assembly that cleans off the air vent port as the float cycles up/down.
Scritto da: JERED ECKLE
Works like a champ!
Replaced one just like it in style. Immediately started working like it should after a few drain & fills of the tank!
Scritto da: MnBoy
It works.
Turned power off to deep well. Drained the water from the existing metal water tank through faucets. Waited until all the water... then air... left the tank. Closed the faucets. Took the old volume control out and put the new one in. This was a fairly easy procedure. Turned power on and waited for tank to fill. I could hear the air escaping the valve, which I did not hear on the old valve. The tank filled properly and I turned the faucets on to bleed air from lines. Pump runs only a fraction of what it did prior to new valve installation. I think the price is a bit high, but if it helps the pump by running less it is probably worth it.
Scritto da: Patrick
Identical to original.
Works fine but the arms on these floats are not a solid rod and that is what went bad on my old one. The arm bend up . These look identical to my original so i decided to beef up the rod with a piece of 8 awg solid copper wire soldered to the float arm. If not for the weak float arm this device would probably never fail.
Scritto da: Quail Valley Farm
Can't go wrong with Johnson Controls components
This switch closes the air pressure relief valve when the water level in the tank reaches the appropriate level. The switch was failing and dripping water in the pump house, non-stop. This is the exact same brand/model I replaced, and the one that failed was on the tank when I purchased the property in 2003, demonstrating its longevity. Given this is a farm tank, serving a home with a pool, and the property, it gets a significant workout. I suspect that because the well is inside of a structure, this switch and other components last somewhat longer than they would if the well system was exposed to the elements.
Scritto da: Mark Williamson
Says Penn, not Johnson controls.
Using it as a spare, not installed yet.
Scritto da: Roark
Works very well and has “secret” ability. :)
Perfect replacement for my deep-well system. Something not mentioned in the description is this has an *optional* outlet for gauge/pressure switch that is pre-threaded. If you dont need this feature, simply do nothing. This threaded recess does NOT by default connect to the tank-side pressure. If you want this feature, simply drill a small (tiny is fine!) hole in the threaded recess and screw your gauge or pressure switch in. That little hole connects the gauge to the pressure side of things. This means one unit can fill the role of two. Simply drill the hole to allow connection of a pressure switch or gauge. Neat!

Produits connexes

hot
York S1-02435329000 Pièce de rechange
3.9/5

€ 452.79

York S1-02435329000 Pièce de rechange
3.9/5

€ 452.79

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array