Pince à sertir Malco C4R à 5 lames pour tuyau de descente

Brand:Malco

3.7/5

77.31

Utilisez la pince à sertir Malco C4R pour produire un sertissage qui réduit les coins d'un tuyau de descente en aluminium ou en acier pour créer une connexion mâle pour joindre les sections de tuyau de descente. Les cinq lames de cet outil à main de chantier polyvalent produisent un double sertissage de 1-1/4 po (31,75 mm) de long sans déformer la paroi du tuyau de descente. Le sertissage de type usine garantit que la paroi du tuyau de descente reste carrée pour une connexion étanche et étanche. La connexion est également plus autoportante lors de l'installation. Une butée de fermeture de poignée maintient un profil de sertissage constant. La construction entièrement en acier trempé et la finition nickel-chrome garantissent une longue durée de vie. La pince à sertir Malco C4R est également dotée de la technologie ergonomique RedLine Handle. Une ouverture de poignée conçue complète la course de puissance naturelle de la main de tout utilisateur et maximise le puissant avantage mécanique 7: 1 de la tête à levier composé pour gérer la liaison. Les contours confortables de la poignée, un insert de poignée antidérapant, l'actionnement de la poignée à ressort et un loquet de poignée actionné par le pouce assurent un ajustement et une sensation naturels pour une utilisation confortable d'une seule main n'importe où sur le travail.

Aucune unité disponible
Produire un sertissage qui réduit les coins d'aluminium ou d'acier. Les poignées ergonomiques Redline ne vous épuiseront pas. L'effet de levier composé produit un avantage mécanique de 7 contre 1. Crée un sertissage serré de type usine. Réduisez rapidement les extrémités du tuyau de descente pour créer une connexion mâle.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Malco
Brand ‎Malco
Color Na
Color ‎Na
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 576 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Grip Type ‎Ergonomic
Handle Material Aluminum
Handle Material ‎Aluminum
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 11.75 x 4.25 x 1.25 inches
Item Dimensions LxWxH ‎11.75 x 4.25 x 1.25 inches
Item model number ‎C4R
Item Package Quantity ‎1
Item Weight 1 Pounds
Item Weight ‎1 Pounds
Manufacturer ‎Malco
Material ‎Stainless Steel
Number of Handles ‎2
Part Number ‎C4R
Power Source ‎Hand Powered
Product Dimensions ‎11.75 x 4.25 x 1.25 inches
Size ‎1-Pack
Warranty Description ‎Limited

3.7

13 Review
5 Star
79
4 Star
11
3 Star
5
2 Star
2
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Steve Furiga
Do not hesitate, buy this tool.
I spent a good hour trying to fit downspouts together the way people suggested on youtube using a needle nose pliers and ended up screaming obscenities. "There has to be a tool for this". I looked at some cheaper units but saw the review that compared this tool to theirs. I chose this tool. I have just spent the day putting together a somewhat complicated system of downspouts from canales, (I live in Santa Fe). My goodness, I never thought I would be writing a review about how much fun (comparatively) it was to work with tool. Don't hesitate. If you're going to be working with downspouts get this tool. You won't regret it. Hopefully you can bypass the hour or so of obscenities!
Scritto da: Amazon Customer
Works great
As some have said this device did a small amount of breaking on a couple joints. I do not think the issue is totally the fault of this crimper, but the thin downspout. I higy recommend this product
Scritto da: Retired Music Prof
Great tool for installing your own downspouts
For years I avoided spending the money for a tool like this that I would only need a few times for each different house that we own. I used needle nose pliers to crimp the upstream section of downspout, and it always ended up being a mangle job. It was an embarrassment, but I covered it up with the next section downstream. When I needed to make a new downspout this time, I compared the purchase price of this tool to what it would cost to hire a handyman to do the job. That made the tool look very affordable. This tool works like a dream! It makes neat, beautiful crimps at each corner of your downspout section. Just be careful not to squeeze too hard, because I think it would be possible to cut all the way through the aluminum. I recommend this tool.
Scritto da: RCL
Sturdy but slices through aluminum downspout.
Looked forward to using this tool but disappointed that it sliced through the aluminum downspout when making a crimp. The blades are too sharp and should be blunt.
Scritto da: K F.
Wish I had been using these all along
The media could not be loaded. These are great! Wish I had gotten these sooner, I ended up redoing all of my downspout work with these because I was just using pliers before and ended up with leaks everywhere. I started over and used these. The downspouts fit with each other so much better and no leaks or jagged edges. Practice on a scrap piece first, use gentle pressure to start and go over the same area a few times to make the crimp longer or deeper. The key is to be gentle so you don't cut the metal.
Scritto da: Geez
Not good
They cut through gutter unless you are very delicate with them.
Scritto da: carefulShopper
Made Life Easier,...a Quality Tool that Delivers! ---BUT Overpriced!
****Updated Apr 2015 FYI Avail at local Sears for 19$ all day. Have noticed Amaz is not always the cheapest now on stuff. ----------------------------- Orig Review 2014: I've wrestled with a few downspouts in my time and just completed a two day project on my house. This is first time I popped for buying some gutter crimpers. So glad I did and wondered why I didn't do it decades ago! I researched carefully before buying for a quality tool that would deliver. I used these on steel downspouts and made cutting /sizing /connecting downspouts a breeze and eliminated pinched /cut fingers tips when joining tough cut/ ragged downspout edges. I figure I saved four hundred in doing the job myself so treated myself to this Malco C4R tool. Strong, well built and easy to use. Handles tougher steel downspouts with ease and aluminum without a sweat. The 3 finger over 2 finger configuration is the way to go and pleased as punch at the time & aggravation these saved me. These are so well build I actually just enjoy looking at them and admiring the engineering that went into this crimper. Am looking for other ways of using these crimpers. SIX stars on this Malco C4R crimper!
Scritto da: Jim Johnson
Great product
Works great
Scritto da: Phil
This tool pays for itself
I decided to get this tool as I started doing more downspout jobs. I used to just crimp the ends with whatever barbaric methods I could think of, which didn't give ideal results and also took a minute or two. This tool allows me to crimp a downspout on all 4 corners in about 10 seconds, which makes for a perfect fit to effortlessly slide it into another piece. This tool will pay for itself easily with the time and frustration it saves me.
Scritto da: Martin Daytona
Works Great
It worked great on my downspouts. Cheaper than hiring a contractor, who never show up anyway. Easy tool to use. Great Purchase.
Scritto da: Amazon Customer
Handy to have
Works well for fitting dryer venting together
Scritto da: S. R.
sturdy
This is almost a tool that a fulltime sheet metal workers would love to have. It is great. SR
Scritto da: Alex
Quality product
Very good quality and easy to use.

Produits connexes

hot
hot
WEICON Duo-Crimp n° 300
3.6/5

€ 92.04

WEICON Duo-Crimp n° 300
3.6/5

€ 92.04

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array