Pitsco Basic Mousetrap Vehicle Kit (pack individuel) pour 1 étudiant

Brand:Pitsco

3.2/5

58.40

Le kit Pitsco Balsa Wood Basic Mousetrap Vehicle offre aux élèves de la 6e à la 12e année une activité pratique pour concevoir et construire un modèle de voiture qui démontre des concepts scientifiques tels que la vitesse, la force, le mouvement et les lois de la physique de Newton, et il enseigne la conception technique. Les étudiants peuvent construire la voiture à partir du kit et peuvent modifier la voiture pour de meilleures performances et une plus grande vitesse. Le kit comprend une souricière, des morceaux de bois de balsa de 12 et 18 pouces de long, des disques compacts de taille standard pour les roues, des entretoises de roue, des rondelles de butée, des tubes en laiton de 12 pouces, une ficelle ultra-fine et des instructions. Les kits Pitsco 57034 (pack de 10 kits) et 57035 (pack de 30 kits) comprennent également une copie du manuel, Mousetrap Powered Cars and Boats de Doc Fizzix. Le véhicule fini mesure environ 4,5 x 5 x 26,5 pouces (H x L x P). (H est la hauteur, la distance verticale du point le plus bas au point le plus haut ; W est la largeur, la distance horizontale de gauche à droite ; D est la profondeur, la distance horizontale de l'avant à l'arrière.) Un kit de véhicule souricière est généralement utilisé dans un cadre éducatif pour démontrer l'ingénierie et la physique. La construction nécessite de la colle blanche, une règle, un couteau, un coupe-fil et une perceuse ou un outil Dremel (tous vendus séparément). Les produits d'enseignement des sciences intègrent des principes mathématiques et scientifiques appliqués dans les projets de classe. Les enseignants des classes préscolaires, élémentaires et secondaires utilisent des kits et des produits d'enseignement des sciences parallèlement au programme de sciences, technologie, ingénierie et mathématiques (STEM) pour démontrer les concepts STEM et les applications du monde réel par le biais d'activités pratiques. Les projets d'enseignement des sciences comprennent un large éventail d'activités, telles que des expériences pratiques en ingénierie, aéronautique, robotique, énergie, chimie, physique, biologie et géologie. , kits pédagogiques et outils pédagogiques. La société, fondée en 1971, a son siège social à Pittsburg, KS.Qu'y a-t-il dans la boîte ? * Pitsco Balsa Wood Basic Mousetrap Vehicle Kit * Pièges à souris (un par voiture) * Pièces en bois de balsa (3 par voiture) * Disques compacts (4 par voiture) * Entretoises de roue (4 par voiture) * Rondelles (4 par voiture) * Tubes en laiton (2 longueurs par voiture) * Corde ultra-fine (1 longueur par voiture) * Un manuel, Doc Fizzix's Mousetrap Powered Cars and Boats (pack de 10 et 30 uniquement) * Instructions la façon dont les élèves peuvent peindre et décorer leurs véhicules.

Aucune unité disponible
Le véhicule fini mesure environ 4,5 x 5 x 26,5 pouces (H x L x P). Renforce les concepts de technologie, d'ingénierie et de mathématiques lorsque les élèves modifient les voitures en fonction de facteurs qui ont un impact sur les performances. Expose les élèves au processus de conception et les encourage à expérimenter et à modifier le véhicule pour une plus grande vitesse ou distance. Comprend les pièces nécessaires pour construire un véhicule propulsé par une souricière pour enseigner la conception technique. Le kit de véhicule de piège à souris en bois offre aux élèves de la 6e à la 12e année une activité pratique pour concevoir, construire et modifier un modèle de voiture qui démontre les concepts scientifiques de vitesse, de force, de mouvement et les lois de la physique de Newton.
Age Range (Description) 12+
Brand Pitsco
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 202 ratings 4.1 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 17.9 x 4.6 x 0.4 inches
Item model number BG57033
Item Weight 0.4 Pounds
Item Weight 6.4 ounces
Manufacturer Pitsco
Product Dimensions 17.9 x 4.6 x 0.4 inches
Size For 1 Student

3.2

8 Review
5 Star
59
4 Star
14
3 Star
15
2 Star
4
1 Star
9

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Britt
Not the wheels in the image
Clear, flimsy wheels came in this kit. I specifically bought this because I thought the wheels were stronger and looked cool. I was extremely disappointed. The kit is way overpriced for what's with it. The car came together ok with some upgraded wheels.
Scritto da: Jonathon D Leszczynski
This kit works, but you can make it much better with some intelligent improvements.
The directions are great and this is a perfect kit to MODIFY for a racer. Skip using the board you see below the mousetrap as one big board. Instead, glue the mousetrap straight to the two side boards (so the car is as wide as the mousetrap) after you cut off a couple more, mousetrap width pieces, from the big board. Use those additional pieces to stiffen up the frame. Use a pipe cutter to trim the axles and get some nylon washers from the hardware store to fit the axles (I used #10 sized.) The nylon washers help you keep the axles straight. If you really have time, you can drill out a bunch of holes to save weight. I also had some wider CD sized wheels that came from the packaging of 100 packs of DVD's, and those wheels easily accepted a wider rubber band to help provide traction to the drive tires. Also, consider a single front wheel over two, if you can manipulate it.
Scritto da: Mellisa Boan
Science Olympiad parent approved
Bought this for Science Olympiad from seeing other parents using this the year prior. Our child signed up for Mousetrap Vehicle AGAIN! We were not thrilled. Year prior we spent countless hours, days, weeks making the perfect mousetrap vehicle. We built around 3 and our kid’s friends parents build 4 or 5. You could imagine the stress this brought to our family. Well when our kids came home and was so happy about signing up for this endeavor again, we were shocked she didn’t remember the pain and anguish from the last year. I quickly bought this and it was PAINLESS and RELAXING. This is easy and fun, the way it should have been the first time. Instructions are kid friendly. Our 10 years did most of the work. Super convenient!
Scritto da: Jerry Stowers
Fun kit to build!
My daughter had this as a school project so we built it and it worked great, it was a science project about force! She painted it too, great fun!
Scritto da: shoppers voice
It worked. Price is a little high for what it is.
I ordered this on two day shipping, and it came on time for a school project. It was missing one of the plastic CDs, so I just used a junk one that I have. The brand for this product is wrong, this is actually a mousetrap car from DocFizzix.com from years ago, I'd assume that they are just re-branding them and selling off left over stock. As for the quality, its okay. The CDs are flimsy and I recommend using real disks for ease of build. Also I found out that it's actually cheaper to buy this off of their store, for like 15 dollars. After I finally managed to throw it together, it performed okay. This thing works best when you have it on longer and flatter surfaces, unlike my test trials (ie. a shorter hallway and on carpet). So, with all of this considered, I give this a 3/5. Is it worth 20 dollars? No, more like 15, or even 10. I also included some images of the build and the package it came in, some of the images may be poor quality so I apologize.
Scritto da: Mark M.
Good enough for 3rd place out of 25.
My daughter ended up with an 87’ run using this kit for a physics class project. Much simpler than trying to do it from scratch. The resulting car is great for a school project. By design it’s not made to be crashed into a fleet of toy trucks by an 8 year old. It did its job at our home and is destined for the trash can during a cleaning project a year from now ;).
Scritto da: Peter M.
A very worthwhile purchase for the curious minded.
The kit was very well made, and I loved the fact that the holes were predrilled. The instructions would be more helpful if it were a little more in dept, as the last steps were very confusing for me. If you by any chance use this kit for Science Olympiad, then you might face problems with the vehicle not fitting into the even parameters, but this issue could be easily fixed with some modifications. All in all, this was an excellent mousetrap vehicle.
Scritto da: James W Thomas
Sucks.
Wheels don’t stay on. Mousetrap spring broke off. Frame has no support. What a disappointment!

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array