POWERTEC 110090 Courroies abrasives 4 x 24 pouces

Brand:POWERTEC

3.4/5

42.21

Présentation de la bande de ponçage en oxyde d'aluminium de 4 po x 24 po de grain 80 de POWERTEC. Ce lot de 10 de qualité supérieure a été conçu pour vous fournir un ensemble économique de bandes de ponçage durables et hautes performances. Fabriqués avec un grain d'oxyde d'aluminium (A/O) à couche ouverte, ils agissent comme un outil polyvalent idéal pour poncer, façonner, décaper et donner une finition lisse à de nombreuses applications de travail du bois. De plus, ces courroies fonctionnent exceptionnellement bien avec les métaux légers et non ferreux, mélangeant les soudures, la fibre de verre, le plastique et le caoutchouc. Chaque ceinture affiche un support en tissu de poids X et possède une forte liaison résine sur résine avec des coutures bien conçues pour des résultats durables. Que vous soyez un professionnel ou un bricoleur, ces bandes abrasives robustes sont compatibles avec beaucoup de vos Ponceuses incontournables, y compris : Craftsman, Makita, Skil, Wen, Ridgid, Porter-Cable, Black+Decker, Bosch, Triton, Hitachi, Metabo, et plus encore. Spécifications : taille de la bande abrasive : 10,2 x 61 cm. : 80Matériel : Oxyde d'aluminium à revêtement ouvert de qualité supérieure (A/O) GrainDos : Dos en tissu de poids « X » solide Petites imperfections• Grain 240 – 400 : Fournit une finition lisse super finePOWERTEC est un fabricant professionnel de machines à bois de haute qualité, d'accessoires de travail du bois et d'un large assortiment de pièces de rechange OEM. Nous nous engageons à dépasser les attentes, tout en apportant les meilleures innovations, technologies et développements de produits à l'industrie.

GRIT : Disponible dans une large gamme de grains uniformes - 40/ 60/ 80/ 100/ 120/ 150/ 180/ 240/ 320/ 400 Grit. Artisanat : ces bandes abrasives de 10,2 x 61 cm disposent d'un matériau résistant à la chaleur et à l'humidité, et ont été conçues avec des coutures expertes qui ne se cassent pas sous la pression. Qualité supérieure : fabriqué avec notre support en tissu X-Weight supérieur, un grain d'oxyde d'aluminium à couche ouverte et une impressionnante résine sur résine qui garantit des performances durables. Utilisation : fonctionne avec un assortiment de ponceuses à bande et d'applications – fournissant un outil de décapage et de ponçage robuste pour le bois, l'aluminium, la fibre de verre, le caoutchouc, le plastique et les métaux non ferreux.
Amperage Capacity 11 Amps
Amperage Capacity ‎11 Amps
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Brand ‎POWERTEC
Country of Origin ‎China
Customer Reviews 4.3 4.3 out of 5 stars 740 ratings 4.3 out of 5 stars
Grit Number 80
Grit Number ‎80
Grit Type Medium
Grit Type ‎Medium
Included Components ‎POWERTEC 110090 4 x 24" Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper For Portable Belt Sander – 10 Pack
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10 x 4 x 4 inches
Item Dimensions LxWxH ‎10 x 4 x 4 inches
Item model number ‎110090
Item Package Quantity ‎1
Item Weight ‎1.5 Pounds
Manufacturer ‎POWERTEC
Material ‎Aluminium
Part Number ‎110090
Product Dimensions ‎10 x 4 x 4 inches
Size ‎80 Grit

3.4

13 Review
5 Star
70
4 Star
14
3 Star
3
2 Star
2
1 Star
11

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Randy Browning
Can’t speak to longevity, but they work.
I’ve used one of the 40 grit belts, so I’ll generalize in this review. I purchased a Bauer 10amp 4x24 belt sander from Harbor, and these fit perfect. I’m working on a sap filled 16” pine disk so the medium causes the belt to gum up (it would not matter what belt you use), but it cleans up well by using a brass wire brush on the belt while running the sander. The finer the grit the more it will clog, but again that’s with any belt. The paper track material is thick and does not show any signs of separation, and the 4” width helps it track straight. The cost per belt is less than half of any big box belt, and only 70% of the offerings at Harbor, which were thin and no where near the accurate grit density.
Scritto da: Amazon Customer
Update after I use
Received on time. Have not used yet but seem to be well made. Will update after I use
Scritto da: jon fredricks
good service
good quality and price
Scritto da: D Lee
Belts Break!!
Poor seams!! Every belt used (4 in all) broke after several minutes of deck sanding with a Makita sander. On the 4th try I had to disassemble the sander to remove the broken belt. Upon closer inspection it is obvious that the seam tape is failing. See photo. Clearly this is a faulty design that has not been adequately tested by the manufacturer. My remaining belts will be trashed.
Scritto da: Warren Y.
solid sandpaper
I used this sandpaper to sand down uneven transition height between sheathings in a mobile home subfloor. The sandpaper is strong and i only used up 3 of these for the entire mobile home. One thing i learned is that if you're looking to take down surface quickly on plywood... go with a 60 or 36 grit paper. 80 is still too fine to take down uneven surface quickly. You'll be there all day although at the end of the day, the job actually gets done.
Scritto da: fishing buddy
Look good.
They look, were shipped promptly. Priced right. I just have been too busy to try them out. Want to work on half log benches stained and coated with epoxy. Used for the first time yesterday, work great.
Scritto da: Tandy Norris
They eat wood as they should.
They work great on my belt sander.
Scritto da: andres cardenas
Very week glue
I sand around 70-100 cabinet doors a day, and these sanding belts only lasted 7-13 doors per belt. I would imagine they would be amazing once you break in the belt, but you won't get to that point.
Scritto da: Vic
Works very well. Did the job I needed it to.
Have a small woodworking shop in my garage my wife and I make different things out of wood. The sandpaper came in very handy works well fits good on the machine. Longevity is OK. Value is good. Did what I needed it to do and I’m still using them.
Scritto da: Hyrule Cofee
Inconstant quality
I bought 4 packs of those sand belt. 2/4 of them was ok and does a great job. The 2 others broke after 5 minutes of sanding. The blue junction between ends is weak for them. So you get a chance of a good or really bad belt.
Scritto da: n
Don't buy these Sanding belts
They work for a while, but fall apart (catastrophically) within a few minutes of use. Other brands do not, so its not the fault of the sander. The belts start to come apart and tend to jam the sander. Do NOT use these. I tried to return an unopened package, but was (sadly) 2 days late and the return window is closed. I will never use Powertec products again.
Scritto da: Jorge Adrian Fernandez Campos
Muy mala calidad
Que lastima de la calidad del producto, llego en tiempo y el precio muy accesible pero lamentablemente al utilizar las bandas se despegaron de inmediato, no duro ni tres minutos de uso y se despegaba, utilice otra para ver si era un defecto en esa unidad, pero al parecer el pegamento no tiene la adherencia necesaria y se despega, lo cual puede ocasionar un accidente a quien está manipulando la lijadora
Scritto da: Chris R.
Garbage, never had so many belts break so quickly.
These belts are garbage and do not last more then 10 mins before snapping. I even went out and bought a quality belt to test my Sander before posting this. It worked perfect for 30 mins, put another on of these back in and snapped in less then 10 mins.

Produits connexes

hot

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array