POWERTEC 110460 3 x 21 bandes abrasives

Name: POWERTEC 110460 3 x 21 bandes abrasives
Brand: POWERTEC
SKU: 0709619854638
Price: 38.04 EUR
Availability: InStock

Brand:POWERTEC

3.5/5

€
38.04

Présentation de la bande abrasive en oxyde d'aluminium de 7,6 x 53,3 cm de grain 40 de POWERTEC. Ce lot de 10 de qualité supérieure a été conçu pour vous fournir un ensemble économique de bandes abrasives durables et hautes performances. Fabriqués avec un grain d'oxyde d'aluminium (A/O) à couche ouverte, ils agissent comme un outil polyvalent idéal pour poncer, façonner, décaper et donner une finition lisse à de nombreuses applications de travail du bois. De plus, ces courroies fonctionnent exceptionnellement bien avec les métaux légers et non ferreux, mélangeant les soudures, la fibre de verre, le plastique et le caoutchouc. Chaque ceinture affiche un support en tissu de poids X et possède une forte liaison résine sur résine avec des coutures bien conçues pour des résultats durables. Que vous soyez un professionnel ou un bricoleur, ces bandes abrasives robustes sont compatibles avec beaucoup de vos Ponceuses incontournables, y compris : Craftsman, Makita, Skil, Wen, Ridgid, Porter-Cable, Black+Decker, Bosch, Triton, Hitachi, Metabo, et plus encore. Spécifications : taille de la bande abrasive : 7,6 x 53,3 cm. : 40Matériel : Oxyde d'aluminium à revêtement ouvert de qualité supérieure (A/O) GrainDos : Dos en tissu de poids « X » solide Petites imperfections• Grain 240 – 400 : Fournit une finition lisse super finePOWERTEC est un fabricant professionnel de machines à bois de haute qualité, d'accessoires de travail du bois et d'un large assortiment de pièces de rechange OEM. Nous nous engageons à dépasser les attentes, tout en apportant les meilleures innovations, technologies et développements de produits à l'industrie.

Montant

Ajouter au panier Acheter maintenant

EAN: 0709619854638

Catégories Sets de batteries et chargeurs, Pièces et accessoires pour outils électriques, Pièces et accessoires pour outils de finition, Pièces et accessoires pour ponceuse électrique, Courroies,

Grain : disponible dans une large gamme de grains uniformes - 40/ 60/ 80/ 100/ 120/ 150/ 180/ 240/ 320/ 400 Grit. Artisanat : ces bandes abrasives de 7,6 x 53,3 cm sont fabriquées dans un matériau résistant à la chaleur et à l'humidité, et ont été conçues avec des coutures conçues de manière experte qui ne se cassent pas sous la pression. Qualité supérieure : fabriqué avec notre support revêtu de poids X supérieur, un grain d'oxyde d'aluminium à couche ouverte et une impressionnante résine sur résine qui assure des performances durables. Utilisation : fonctionne avec un assortiment de ponceuses à bande et d'applications – fournissant un outil de décapage et de ponçage robuste pour le bois, l'aluminium, la fibre de verre, le caoutchouc, le plastique et les métaux non ferreux.

Batteries Included?	‎No
Batteries Required?	‎No
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 1,781 ratings 4.4 out of 5 stars
Grit Description	‎Coarse
Grit Rating	‎40
Included Components	‎Sanding Belt
Is Discontinued By Manufacturer	‎No
Item model number	‎110460
Item Package Quantity	‎1
Item Weight	‎15.8 ounces
Manufacturer	‎POWERTEC
Material	‎Aluminum
Part Number	‎110460
Product Dimensions	‎8.8 x 3.1 x 2.9 inches
Size	‎40 Grit
Style	‎3" x 21", 40 Grit, AO, 10 PK

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Kindle Customer

Good quality sanding paper for belt sander

Worked great for sanding my bed.

Scritto da: jimmy cook

Good quality

Worked fine for me. Will buy again.

Scritto da: Travis

Good value but poor longevity

The price is right but you get what you pay for. I picked up a pack of these and have been wearing through them pretty darn quickly (5-10 min of use). There are also a lot of red debris from the sandpaper that comes off that you have to keep cleaning off the surface you are sanding.

Scritto da: RufusW

Great value compared to buying in big box store

These work very well, and are very well made. I only took 1 star off because they don't seem to track as well as some of the name brand belts I've used, and take a little extra fiddling to stay aligned properly. Otherwise a fantastic value and I would definitely purchase again. Would give 4.5 stars if possible

Scritto da: Mike

So far so good

Sanded things, didn't fall apart instantly. Which was a pleasant surprise

Scritto da: Paul Mazurek

Great price

Along with this purchase also buy the rubber block sandpaper uncloger ,it will make your paper last 3 or more times longer and works great Amazon has them ( it works on all types of paper and sanding machines

Scritto da: jerry Chmielewski

Are better than anticipated

These stay together well, as in not a single belt has broken on me.

Scritto da: Marion

No problems

There are negative reviews on this product that are unfounded, unless you're using your belt sander to grind nails. Used one belt, and little of a second, to strip four layers of 20 year old paint and sealer off a stairwell landing down to bare wood in under two hours, after giving up using paint stripper. Used a new one today to take rogue saw marks out of freshly ripped lumber without issue.

Scritto da: mr t a

cheap

arrived on time good value for money haven't tried them yet

Scritto da: Mr. J. M. Glover

good quality

bought these to use on my sander that just takes sheets (not a band sander). I cut these in half and they fit on perfect. made from good thick material not thick paper backing, very rough.

Scritto da: Royce G.

Amazing value and much better quality then I expected

When I started using these sanding belts I noticed a significant difference right away. The fit is slightly looser than other belts, Im not sure if this is by design on whatnot, but they worked extremely well. Not a single belt overheated or tore, and they lasted for longer then other pads that I've ordered. Best of all, they just sanded so efficiently and didnt wear down. They just kept going and didnt clog up or need to be replaced. I've re-ordered more for my next project, I've been using the 80 and 120 grit. My project was to refinish the pine wooden walls in my office. I started the project using mastercraft sanding belts but was gonig through them very quickly so I needed to find something cheeper. I was expecting these to cost less but and very surprused that they out performed the ones I was using.

Scritto da: Christopher Doig

Good product

Used to refinish an old deck. Effective at removing wood. Nice finish (felt smoother than an 80 grit). Durable and held up well with regular sanding...only damage to the belts was inadvertent high screws that would catch. More durable than what I had purchased from the local hardware store.

Scritto da: paul newman

one of the best belts I have used

I used these belts to remove the latex stain on a 20' x30' deck. At the end of the project I washed the belts with mild detergent/ water solution to remove fouling. They are good as new and ready for next sanding project. I highly recommend. P.S. make sure they are properly installed on belt sander noting direction of rotation indicated by arrow on inside of belt.