POWERTEC 70219 Tuyau de dépoussiérage en PVC (3 pouces x 10 pieds)

Brand:POWERTEC

3.6/5

73.14

Le tuyau de dépoussiérage en PVC de 3 pouces x 10 pieds - POWERTEC 70219 Un tuyau de dépoussiérage pratique, sûr et économique conçu pour améliorer vos systèmes de dépoussiérage et de filtration d'atelier existants. Polyvalence flexible Que vous ayez un aspirateur industriel ou un système de dépoussiérage centralisé intégré dans votre magasin, vous comprenez l'importance d'avoir un tuyau de dépoussiérage super léger, flexible et résistant aux plis qui peut résister aux rigueurs de l'utilisation quotidienne en magasin. Robuste Fabriqué à partir de matériau PVC de haute qualité, ce tuyau ne s'effondrera pas sous la pression de votre dépoussiéreur. La durabilité, la résistance et la facilité d'installation du PVC le rendent idéal pour le contrôle de la poussière en atelier, la collecte de la sciure de bois, la menuiserie et le travail du bois. Caractéristiques de conception innovantes Affiche un corps incroyablement translucide, renforcé par un fil d'acier à ressort en spirale intérieur vous permettant de surveiller les performances de votre mouvement d'air, la collecte des débris et la séparation/filtration des poussières fines. Classé sûr Avec le dépoussiérage, il faut toujours tenir compte des dangers de l'électricité statique et du risque d'incendie. Ce tuyau en PVC présente une construction ignifuge, résiste à la température (jusqu'à 176 °F) et est capable de décharge électrostatique (lorsqu'il est mis à la terre). Il offre également une résistance exceptionnelle aux produits chimiques ainsi qu'aux matériaux acides et alcalins. Spécifications du produit Données Construction : PVC souple renforcé (polychlorure de vinyle) Fil d'acier à ressort spiralé renforcé : Fil d'acier à ressort Taille : 3 pouces de diamètre x 10 pieds de long Épaisseur de paroi : 0. 5 mm / 1/64 Rapport de compression : 3: 1 Plage de température : -50° F à 158° F (court terme jusqu'à 176° F)

Aucune unité disponible
Idéal pour un assortiment de collecteurs de sciure de bois, de conduits de ventilation intérieurs de climatisation et de systèmes de dépoussiérage en PVC de 3 po pour les applications de menuiserie. Parfait pour tout système de dépoussiérage à vue dégagée - vous permettant de surveiller la séparation des poussières/débris et la filtration des vapeurs/fumées. Le tuyau ultra flexible renforcé avec du fil d'acier à ressort offre robustesse et maniabilité. Fabriqué à partir de PVC de haute qualité pour une durabilité, une résistance et une installation facile. Comprend (un) 3 tuyaux flexibles transparents en spirale gauche de 10 pieds de diamètre.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Color Clear
Color ‎Clear
Customer Reviews 4.6 4.6 out of 5 stars 294 ratings 4.6 out of 5 stars
Included Components ‎PVC Flexible Dust Collection Hose
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 36 x 4 x 4 inches
Item model number ‎70219
Item Package Quantity ‎1
Item Weight 3.28 Pounds
Item Weight ‎3.28 pounds
Manufacturer ‎POWERTEC
Material PVC
Material ‎PVC
Measurement System ‎English/Standard
Nominal Wall Thickness 5 month
Part Number ‎70219
Product Dimensions ‎36 x 4 x 4 inches
Size ‎3 Inch
Style ‎10Ft

3.6

8 Review
5 Star
77
4 Star
16
3 Star
3
2 Star
2
1 Star
2

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Curt Spender
Heavy duty
Is heavy duty and better than expected. Easy to use and works great on my shop vacuum system.
Scritto da: Kelly S. Parker
excellent vent line for a bathroom fan
The dummies who installed my office bathroom fan used a 4" flexible foil tube to vent it to the roof. They tried to use foil tape to bridge the gap to the 3" output of the fan. 9 years later, I got up in the suspended ceiling and noticed that most of air was just blowing around that dead space. It is much easier for air to blow through that gap than to go the extra ten feet to make it to the roof. This fits perfectly on the plastic 3" fan output and also on the 3 to 4" adapter. The stiffness of the tube makes it bend perfectly towards the roof vent. I want to find more uses for this excellent tube!
Scritto da: Sabayon Linux User
Nice stuff
Warning, I drilled my opening with a 3 inch hole saw, and this hose would not go through the hole. I needed a 3 1/8" hole for a squeeze fit, or a 3 1/4" hole for a slide fit. I am using it with an inline 12Vdc bilge vent fan. It went on the fan intake and exhaust flanges so tightly, I did not need any clamps (but it did go on). Not cheap, but looks like it should last. Not sure it is fuel proof, so I would not splash fuel on it.
Scritto da: Anne H.
Works!
I am using this in my woodturning shop. I previously used black tubing with the vacuum system. This is much easier to see any clogs - and in fact seems to clog less often - and provides great suction. Would definitely purchase again.
Scritto da: OopsIDidItAgain
Worked perfect
I have an old grinder that works great but was in desperate need of a new hose. This was way too long but the perfect width and I wanted clear. I simply cut it to size and saved the rest, for what I don’t know. Works great!
Scritto da: Mr fix
Powermatic pm2000 dust collector replacement
I replaced the dust collection hose inside my Powermatic pm2000 table saw. The one that came with the saw was two stiff so when I would tilt the blade it would pull it loose and get saw dust inside the cabinet. This one works great! The coils are backwards from the original so it wouldn’t thread on like the original, but not a problem as it pulls right over the threads and stays put.
Scritto da: nj.firefighter
I liked the quality. Durable for my bath vent!
Just the perfect vent I needed for a bathroom remodel. Strong, durable walls that are nice and thick. I used a short piece to flex about the exterior good to bath fan damper. I measured it perfect for a consistent stretch, no wrinkles. Had the fart fun run for a test. Great air flow through a few feet. This vs metal flex that will corrode. This will need to be in a wall until the earth splits open. Just what I wanted for hopefully a very long service life.
Scritto da: HH Steve
Flexible 3" air hose for Powermatic saw
Like another reviewer here, I was looking for a replacement hose for a Powermatic PM2000 table saw. This is it! The answer to the problem of the factory hose being waaaay too stiff, falling off every time the blade is tilted. Perfect solution....highly recommended if you need flexible material.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array