Raindrip 307050B Tés barbelés, 1/4", 50 par sac, paquet de 50, version originale

Brand:Raindrip

3.8/5

€
34.54

Utilisé pour établir une branche 1/4 à partir d'un tube 1/4 ou deux branches 1/4 à partir d'un tuyau 1/2. La conception à double barbillon permet des pressions d'eau jusqu'à 50 P. S. I. No. R307CT : Type : barbelé, pression nominale : 50 psi, quantité de l'emballage : 5, type de colis : carte n° 307025B : type : barbelé, pression nominale : 50 psi, couleur : Noir, quantité de l'emballage : 25, type d'emballage : sac n° 307050B : type : barbelé, pression nominale : 50 psi, couleur : noir, quantité de l'emballage : 50, type d'emballage : sac

Montant

Ajouter au panier Acheter maintenant

EAN: 0018171070500

Catégories Patio, Lawn & Garden, Jardinage et entretien des pelouses, Equipement d'arrosage, Equipement d'irrigation automatique, Têtes d'arrosage,

La conception exclusive permet une utilisation avec des pressions d'eau plus élevées jusqu'à 50 PSI. Utilisez pour connecter 2 sections de tube 1/4 afin de diriger l'eau vers un autre endroit ou connecter un tube 1/4 à une ligne d'alimentation. Paquet de 50 tés d'irrigation goutte à goutte en polypropylène de 1/4 po.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Raindrip
Brand	‎Raindrip
Color	Original Version
Color	‎Original Version
Connector Type	Barb
Connector Type	‎Barb
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 817 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Black
Exterior Finish	‎Black
Included Components	‎Product Information Guide
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.25 x 4 x 7 inches
Item Dimensions LxWxH	‎1.25 x 4 x 7 inches
Item model number	‎307050B
Item Package Quantity	‎1
Item Weight	0.05 Pounds
Item Weight	‎0.05 Pounds
Item Weight	‎0.8 ounces
Manufacturer	‎Raindrip
Material	Polypropylene
Material	‎Polypropylene
Number Of Pieces	50
Number Of Pieces	‎50
Part Number	‎307050B
Power Source	‎Wind-Powered
Product Dimensions	‎1.25 x 4 x 7 inches
Size	50 Pack
Size	‎50 Pack
Style	‎307050B
Warranty Description	‎Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling.

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: El Supremo

Easy to install if you have a heat gun to soften the tubing first

Actually, it depends on the type of tubing you have. Vinyl tubing is softer than poly and thus is considered easier to work with and easier to force onto the tee without softening Poly tubing may be a bit stiffer at first, but it does have some benefits. It withstands UV rays very well and does not expand, as much, when heated, and in my opinion, is rated for higher pressures and will not pop off the tee as easily as vinyl. But to make your installation easier, heat the end first to soften it. As with everything your mileage may vary,

Scritto da: Airyu

Simple, but Just What I Needed

I purchased these tees as part of a fall landscaping project where I converted my sprinklers to drip irrigation and then ran emitters and soaker hose throughout my front yard to ensure everything is watered efficiently. I needed quite a few 1/4" barbed tees, and this package got the job done (with some still left over for future projects). The tees took some effort to connect to the 1/4" tubing, however I consider that a positive overall as they will also not pop off under stress. The price was competitive (at least compared to my local brick-and mortar shops) and so I was quite glad to save myself the gas it would have taken to pick these up from the store.

Scritto da: Renee

Easy to attach to tube

These are not as thick, and they have a point which makes it much easier to attach to the flex tube, then the others I have bought. I highly recommend especially if your hands are not strong enough or it hurts your hands when you try to put on the thicker ones.

Scritto da: David S.

could be a little better.

They did fit my 1/4 polt just fine. I ended up breaking a couple of them and pushing it on, so not so great.

Scritto da: Trish Raynor

Good quality

These are easy to use. The tapered ends make it easier to get the hose on

Scritto da: Cheryl

install easily

I like the Raindrip connections. I have tried other brands but they don't go in the tubing easily.

Scritto da: Jose Hernandez

Go with the Dig Brand Instead...20% of these leak

I've been using the Dig brand of 1/4" connectors for years, and I tried giving this Rainbird brand a chance because of the reviews and because they were a little bit cheaper. I figured, "What can go wrong" with a simple tee connector. Well, to begin with, these are a little bit easier to install into 1/4" drip tubing because they seem to be an infinitesimal fraction smaller than the Dig connectors. However, about 20% to 25% of these leak after you install them. The leak manifests as a high stream, very faint, spray that shoots out. At first I thought they were leaking at the connection point with the hose due to the slight lack of tightness vs the Dig brand. However, looking at them closely I saw that they have been leaking at VARIOUS, random, points throughout the tee fitting itself. I noticed this immediately upon installing them on various occasions. So there are micro-cracks in some of these. The quality is very obviously deficient. I DO NOT recommend these at all. Go with the Dig brand connectors!

Scritto da: A.

Good product

As advertised