0
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister
0

Total:€ 0.00

Voir le panierVérifier
LoginRegister

Red Devil 1170 Outil de pointage en plexiglas, 1 paquet

Brand:Red Devil

3/5

€
34.50

DESCRIPTION DU PRODUIT Un moyen rapide et facile de tracer et de casser des feuilles de plastique acrylique. Utilisez-le pour créer une marque de rayage très nette et précise sur la surface, puis pliez le long du scribe et cassez-le proprement. Plusieurs passages sont nécessaires pour atteindre la profondeur requise. Veuillez lire attentivement les instructions de l'emballage. Manche en plastique moulé, lame en acier super tranchante. Utilisation sur plexiglas, acrylique et plastique. Cliquez sur le lien Red Devil en haut de la page pour magasiner dans la boutique de la marque Red Devil. DU FABRICANT Un moyen rapide et facile de tracer et de casser des feuilles de plastique acrylique. Manche en plastique moulé, lame en acier super tranchante. Utilisation sur plexiglas, acrylique et plastique.

Montant
Ajouter au panierAcheter maintenant

EAN: 0075339011706

Catégories Outils et amélioration de la maison,

Ne pas utiliser avec Lexan. Utilisez pour tracer le plexiglas, puis accrochez-vous à la ligne de coupe. Pour plexiglas, acrylique et plastique. Lame en acier super tranchante. Rapide et facile.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Red Devil
Brand ‎Red Devil
Color Red
Color ‎Red
Customer Reviews 4.0 4.0 out of 5 stars 3,751 ratings 4.0 out of 5 stars
Handle Material Plastic
Handle Material ‎Plastic
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 7.9 x 3.7 x 1.2 inches
Item Dimensions LxWxH ‎7.9 x 3.7 x 1.2 inches
Item Length 7.9 inches
Item Length ‎7.9 inches
Item model number ‎1170
Item Package Quantity ‎1
Item Weight 0.06 Pounds
Item Weight ‎0.06 Pounds
Item Weight ‎1.01 ounces
Manufacturer ‎Red Devil
Material Steel
Material Steel (Blade)
Material ‎Steel
Part Number ‎1170
Product Dimensions ‎7.9 x 3.7 x 1.2 inches
Size ‎1 Pack

3

13 Review
5 Star
54
4 Star
17
3 Star
13
2 Star
6
1 Star
11

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Mala
Perfect tool
Easy to use on acrylics. Used it to cut acrylic sheets and the scissors were not strong enough. This was all I needed.
Scritto da: S. Bond
Takes muscle
This eventually got the job done but it takes way more strokes than indicated. After breaking off the piece I needed, I also had to sand the edge with a sanding block, fine grit, to get a nice edge. I used it on polycarbonate clear plastic sheeting, 1/16" thick. It did the job of replacing old plexiglass on a 65-year old anniversary clock.
Scritto da: Amazon Customer
Not too thick
Not for 1/8 or thicker.
Scritto da: Sue S.
Not great
Seems like there's a bit of a debate here in the reviews section. On one hand, a lot of people found this tool to be a piece of junk. On the other hand, some people say that you have to know what you're doing and use the tool properly. I guess count me in the first group. I bought this to cut think pieces of acrylic to size - I just needed to trim off like half an inch, and this tool was suggested when I bought the acrylic as "people also bought." It seemed like a good idea. The tool itself came well-packaged and as advertised. There were really not great instructions. When I tried to use it according to the instructions that were given, I was able to execute as described - I drew a guide line and then repeatedly used the tool to etch a notch into the acrylic. Unfortunately despite multiple passes, I never was able to create an actual groove deep enough to be able to snap the trimmed edge off cleanly. I do echo the recommendations to practice first on a spare piece of your material. It takes a bit to get the hang of it. In the end I wound up using a very sharp set of scissors to get the job done. This purchase was indeed a disappointing waste of money.
Scritto da: Beth Nunes
Did okay
Product did what it was supposed to do but then you need to use very sharp scissors to finish the job…
Scritto da: relchip_rrea
Not For a Novice!
I am giving this four stars because using it as described on the package, it didn't work well for me. I believe that someone with more experience and skill would be better at rating this. I had difficulty keeping the cuts straight, so the scoring depth might have been too shallow and inconsistent. I ended up with broken edges on two of the three cuts, which I attribute mostly to myself. However, if you have not done this before, it is not easy, so be aware!
Scritto da: Ronald Schafer
Great for cutting down PMMA ND Filters
Ordered myself a Matte Box For my Mirrorless Camera, and needed filters. Only found super expensive or very low priced sets made of PMMA. The PMMA filters were also larger than what my matte box would support. Idea! Find a tool to cut them down. Well it worked. See photos from when I fitted the filters after cutting. Also took a small Dremel and ground down the edges. This worked out perfectly for my small project, well worth the cost of the tool. Overall the tool fits good in the hand. Even has a small hole in the top of the handle for you to hang on a hook. Hope this was helpful.
Scritto da: KernsGibbs
It works
I build picture frames for my wife's artwork, and have struggled cutting the plexiglass. I clamped a heavy T square to the plexiglass and scored along the edge 10 plus times. On my first attempt, I hadn't scored the edges enough, so it was a jagged break. On my second attempt, I carefully scored the edges, in both directions, and had a very clean break. NOTE: this is a scoring tool, not a cutting tool, so follow the directions.
Scritto da: Chris W.
Almost useless
Does not track well and is not near sharp enough to do the job. My full utility knife was much better and that’s not saying much
Scritto da: david cook
It works
Yes it cuts perspex, but by scoring!! You need to repeat the score multiple times, it's not like cutting butter!! And use some meaningful effort
Scritto da: JJ
Does the job!
Used it to score plexiglass, works well
Scritto da: T bone
Five Stars
worked a treat, no splitting of plastic sheet using this tool.
Scritto da: René Gagnon
Bien pour le prix
Usage pour maison

Produits connexes

hot
Gatco 4055 Elevate Crochet pour peignoir Chromé Crochet simple Crochet simple chromé
3.8/5

€ 37.72

Gatco 4055 Elevate Crochet pour peignoir Chromé Crochet simple Crochet simple chromé
3.8/5

€ 37.72

hot
EASTMAN 60030 Robinet à boisseau sphérique droit en laiton 3/4" FIP x 1/2" OD
3.6/5

€ 43.82

EASTMAN 60030 Robinet à boisseau sphérique droit en laiton 3/4" FIP x 1/2" OD
3.6/5

€ 43.82

hot
BOSCH 85297MC 1/2 po. x 11/16 po. Fraise ronde à pointe de carbure
2.5/5

€ 56.31

BOSCH 85297MC 1/2 po. x 11/16 po. Fraise ronde à pointe de carbure
2.5/5

€ 56.31

hot
Pochette à outils et clous de charpentier Style n Craft à 10 poches avec pince à ruban, pochette à outils en cuir robuste, pochette en cuir pleine fleur parfaite et durable, jaune avec coins en cuir noir (93924)
3.4/5

€ 113.27

Pochette à outils et clous de charpentier Style n Craft à 10 poches avec pince à ruban, pochette à outils en cuir robuste, pochette en cuir pleine fleur parfaite et durable, jaune avec coins en cuir noir (93924)
3.4/5

€ 113.27

hot
Tuyau d'air Metabo HPT, 3/8" x 50-Ft, polyuréthane de qualité professionnelle, sans raccords (115157M)
1.9/5

€ 93.92

Tuyau d'air Metabo HPT, 3/8" x 50-Ft, polyuréthane de qualité professionnelle, sans raccords (115157M)
1.9/5

€ 93.92

hot
Broan-NuTone FG800RGBS Haut-parleur Bluetooth avec couvercle/grille LED à changement de couleur personnalisable pour ventilateurs de salle de bain, installation facile pour bricolage, plastique, blanc, carré
3.2/5

€ 139.09

Broan-NuTone FG800RGBS Haut-parleur Bluetooth avec couvercle/grille LED à changement de couleur personnalisable pour ventilateurs de salle de bain, installation facile pour bricolage, plastique, blanc, carré
3.2/5

€ 139.09

hot
Greenlee 859-4 JEU DE PRISE-2-4 PVC (859-4)
2.5/5

€ 1114.88

Greenlee 859-4 JEU DE PRISE-2-4 PVC (859-4)
2.5/5

€ 1114.88

hot
Lbc Bakery Equipment 50800-103 Poignée de porte à loquet LRO
0/5

€ 390.51

Lbc Bakery Equipment 50800-103 Poignée de porte à loquet LRO
0/5

€ 390.51

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array

Total:€ 0.00

Voir le panierVérifier

Catégories

Toutes les catégories
Menu Catégories Près Chariot

Menu