Remplacement de déversoir d'écumoire Blue Devil, déversoir d'écumoire pour piscine - 8 pouces

Brand:Blue Devil

3.4/5

42.75

Garder votre piscine propre n'a jamais été aussi facile avec la porte de rechange Blue Devil Skimmer Weir ! Ce déversoir de piscine a été conçu pour être un remplacement de qualité supérieure pour les écumoires de piscine standard. Le Blue Devil Weir est une partie nécessaire de votre système d'écumoire, gardant les feuilles, les brindilles, les insectes et autres débris hors de la surface de l'eau. L'eau est aspirée au-delà de l'entrée du filtre et maintenue en place par la porte du déversoir mobile pour garder les débris indésirables dans l'écumoire en vue de leur élimination. Le déversoir empêche également l'air déplacé d'entrer dans le filtre et le système de pompe lorsque les gens nagent, permettant au système de fonctionner correctement. Le déversoir Blue Devil Skimmer est si facile à installer ! Tenez simplement votre nouveau déversoir dans l'écumoire, tirez sur le cordon vert pour libérer les piquets de support, et vous êtes prêt à partir ! Le déversoir mesure 8 de large, une taille idéale pour plusieurs marques de skimmer de piscine.

Taille fonctionnelle : la taille de la porte de 20,3 cm de large s'adapte aux écumoires de piscine de 20,3 cm. CONSTRUCTION DURABLE: La construction en plastique solide dure des années d'utilisation. Installation facile : maintenez simplement le déversoir en place et tirez sur le cordon pour libérer les broches pour un assemblage rapide et sans outil. PROTÉGEZ LA POMPE ET LE SYSTÈME DE FILTRE : Empêche l'excès d'air d'entrer dans la pompe et le système de filtre pendant que les personnes sont dans la piscine. Gardez votre piscine propre : aide à écumer la surface de l'eau et à garder les feuilles, brindilles et autres débris dans l'écumoire pour le nettoyage.
Brand Blue Devil
Color White
Country of Origin Mexico
Customer Reviews 4.3 4.3 out of 5 stars 228 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 8 x 5 x 1.3 inches
Item model number B8508
Item Weight 4.8 Ounces
Manufacturer Valterra Products, LLC
Material Plastic
Product Dimensions 8 x 5 x 1.3 inches
Style Above Ground

3.4

9 Review
5 Star
60
4 Star
22
3 Star
11
2 Star
2
1 Star
6

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: VA Beach
Working great for 5 years
I bought this in 2018 and now, in 2023, it's still working great. It's not really showing any signs of wear so I expect it to keep functioning quite a bit longer. I'm very happy with the purchase.
Scritto da: Billy Pilgrim
Perfect fit
The green cord was hard to pull out, but once it was in position, the gate worked great. Huge improvement in water velocity.
Scritto da: K. Batz
Great universal door- doesn't always stay
In previous ones, there was a blue wire to pull to install. This one had little metal pins to pull out once the door was in. The pin heads are small and smooth and can't be pulled out under water. They also pop out often and you have to hope you can find the spring piece. Wish they offered replacement parts.
Scritto da: nrebk
It works
Had to modify it a little to fit but works great
Scritto da: geoffrey johnson
Instructions are real lacking but the weir works fine
It works as a universal fits all per the opening, e.g. if you are replacing the factory fit 8.5in weir need to get an 8in an will have slightly smaller weir flap now. The reason 3 stars is instructions are way too brief unclear. It "installs"/attaches inside your skimmer using its tension rod not unlike shower curtain tension rods. The tension rod is "locked" by 2 pins that the "instructions" say "do not pull pins until installed" which is hard/impossible if you install it where it needs to be to work b/c you cannot get to the pins at that point. Note you will need pliers to pull the pins. What you need to do is insert the Weir into the skimmer and pull the pins while you can get to them, the tension rod will shoot out to the side walls of skimmer, and then slide the weir lower into position. I did mine from inside the pool. Also the weir is hollow and open ended on each side with Styrofoam block inside that I thought was packing material and removed, but actually the styrofoam is needed for the weir flap to work, so I got to install the weir twice ;) . Again instructions are not clear but just think of it as a tension rod system that simply needs to be released by pulling pins (need pliers for that) and simply slide it into the skimmer housing. BTW you can pull the pins before inserting the weir in the skimmer but need to make sure the tension rod at each end is pressed against something solid (pool decking in my case) so it doesnt shoot out and loose spring.
Scritto da: Knarfster
Super easy to install and a bargain
Way cheaper than a hayward part and super easy to install. It was the right size out of the box.
Scritto da: Rajmitch
Ignore the Directions
The directions said to "pull a string" to release the spring-loaded pins which hold it in place. Yet there is no string. What you really have to do is pull these metal pins out of the front (facing the pool) to release the spring. My suggestion is to pull one and then set it in place, then pull the second one out. Other than that, it does what it should.
Scritto da: Vegas Aardvark
Cheap gate
You get what you pay for, I replace this each year as it pops off. Works well, but it doesn’t last very long
Scritto da: Sparky
Works as it should
works as it should

Produits connexes

hot
Xcalibur Oreq LN4000
3.5/5

€ 80.94

Xcalibur Oreq LN4000
3.5/5

€ 80.94

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array