Rouleau de ruban adhésif TapeCase 423-3 UHMW – 3 po x 108 pi. Ruban de réduction des grincements avec adhésif acrylique à haute adhérence. Rubans de réduction de friction 36 verges 3 pouces translucides 1

Brand:TapeCase

3.4/5

162.11

Le ruban résistant à l'abrasion TapeCase 423-3 UHMW est un adhésif autolubrifiant, compatible avec les métaux peints ainsi que les plastiques. Le ruban adhésif à haute adhérence offre une performance efficace dans le contrôle des grincements et des cliquetis causés par le frottement des matériaux métalliques ou plastiques. Ce ruban adhésif acrylique est un choix privilégié dans les industries de la fabrication, de l'automobile et de la distribution pour les applications d'usure par impact et de glissement. Ce ruban offre également des applications de réduction de frottement, d'insonorisation et de résistance à l'abrasion dans les environnements domestiques et industriels. Le ruban acrylique fin nécessite peu d'entretien mais est plus durable que les rubans PTFE.

Spécifications : le rouleau de ruban adhésif robuste mesure 3 po de largeur et 108 pi de longueur et a un ruban de 0,005 po d'épaisseur. Longévité : ce ruban résistant aux frottements offre une adhérence durable pour un usage industriel et général. Le ruban de réduction de grincement nécessitant peu d'entretien dure plus longtemps que les rubans PTFE dans les applications où la lubrification n'est pas possible. Applications : ce ruban adhésif acrylique offre une excellente adhérence et des liaisons solides pour protéger les goulottes métalliques, les boîtes en carton ondulé, les convoyeurs et les rails de guidage. Le ruban à haute adhérence est utilisé dans les industries de la fabrication, de la distribution et de l'automobile. Réduction des grincements : le ruban insonorisant adhère aux surfaces métalliques, en bois ou en plastique normales et contaminées, qu'elles soient lisses ou peintes. Il aide à minimiser les grincements et les cliquetis causés par les vibrations ou l'usure des métaux. Ruban en polyéthylène : le ruban résistant à l'abrasion est conçu pour créer un effet de plan de glissement qui permet des contacts de surface sans aucune usure. Le support du ruban offre un mouvement fluide et sans frottement.
Brand TapeCase
Color Translucent
Item model number 3-36-423-3
Manufacturer TapeCase
Material Polyethylene, Acrylic
Number of Items 1
Product Dimensions 5.25 x 5.25 x 3 inches; 0.18 Ounces
Special Feature Strong

3.4

13 Review
5 Star
66
4 Star
16
3 Star
8
2 Star
3
1 Star
6

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: Homeplate Ump
Now I can slide my EZ chair
I just moved to a new place with faux wood flooring in the living room (vinyl covered flooring). My old favorite swivel arm chair has a metal circular base, and NO WAY will it slide or budge an inch over this new vinyl flooring. So I invested in a roll if this "slick" tape and took 15 minutes to tightly wrap the entire metal circular base of the chair just like the handle of a baseball bat (like we used to do as kids when we taped our new wood bats). Now the chair can be slid across the floor just like it's on real smooth natural wood. Very happy with the 7 bucks spent!
Scritto da: M. Welk
Needed this for Slideing tape.
I have used reinforced heat resistant Teflon tape before , that works good but is often thicker than need. This tape is not thick , the thickness is more like a primo packaging tape. I could have used a slightly thicker one, but this will make a better sliding surface without changing things much. I used it on a wood-on-wood drawer , and it solved the problem, the drawer now slides easier and no longer damages the surfaces. The adhesion is good enough to peel the photo finish off , and still allowed for some lift and reset positioning prior to pressing it down. Looks like it would also be removable. Adhesion is a great balance.
Scritto da: C. Pinkney
Great surface for computer mouse feet
Roll seems small for 15ft, but the tape I got is thin, so I’m trusting it is that length. In any case this low friction tape makes for a great resurfacing of computer mouse feet. I just stuck it on the existing feet on both a Logitech and Apple mouse and then used a very sharp craft knife to carefully cut around the feet to remove the excess. The knife has to be really sharp as this stuff is quite tough. Seems to stick well and has less friction than the original mice feet even when new, which is good. Better and cheaper than buying model specific feet and only took a few minutes to cut out. Even if they eventually wear down or unstick I have plenty of tape left to make more.
Scritto da: Ragnar
Works well
As advertised.
Scritto da: gbyoung
An 18mm width IS NOT 1/2" like its supposed to be.
Kinda miffed at the (IMHO) bogus advertising. Haven't tried it yet, so we'll see if it works..... especially for the price of the stuff.
Scritto da: LewisT
Drawer slide use
I have a older chest of drawers that the drawers slide wood on wood. This was very annoying to open and you had to drag the drawers. Installing this tape made the drawers slide effortless. Definitely recommend.
Scritto da: John M. Wong
Good low friction tape
Good grease-less solution for eliminating friction and wear between sliding parts.
Scritto da: mike king
Tape was of good quality and works well for my application.
Tape was of good quality and works well for my application. Fast shipping and tracking info was fast and up to date. A+
Scritto da: Ian Terry
Solved a problem - worth the cost
This could be thought of as the world's most expensive sticky tape, but it solved a problem of sticky wooden drawers (redwood runners on a redwood cabinet frame.) It transformed the performance of the drawers giving a smooth opening and closing with no stickiness. The traditional remedy of candle wax don't compare with this high-tech tape which sticks securely and has the appearance of being very durable. I'll get back to you in ten years with a progress report :-)
Scritto da: Mr. Justin Evans
My BMW 3 series had a frustrating squeak caused by ...
My BMW 3 series had a frustrating squeak caused by the felt on the top of the doors rubbing against the door frame when the car was slightly less than perfectly clean. Installed this and the squeak has gone away completely transforming my car. I've had it in place now for a month and it's still as new.
Scritto da: Fraser
Not Flat
This tape was not flat off the roll. One side was stretched , came off the roll puckered. The tape wasn't rolled up flat on the reel or it wasn't packed properly. Maybe stored in a poor environment, too hot. I was slicing it thinner to get 4 - 7/64" strips 8" long, had to use up 6' to get something usable. I suggest you look for something better than this tape for a low friction surface.
Scritto da: JMJR
A good value for low-friction tape
I mistakenly ordered this tape thinking it was anti-slip tape due to the "high tack" line in the description, only to realize it was low-friction tape. I will still come up with uses for it such as wood working jigs and tool fences.
Scritto da: CNC Guy
Great product!
Used this tape to get rid of an unpleasant sound in my sliding blinds. Worked out really well.

Produits connexes

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array