SharkBite 1/2 Push to Connect x 1/4" (3/8" OD) Push to Connect Vanne d'arrêt droite, quart de tour, tuyau PEX, cuivre, CPVC, PE-RT, HDPE, 23337-0000LF

Brand:SharkBite

3.7/5

34.91

DESCRIPTION DU PRODUIT Simplifiez vos projets de plomberie avec le robinet d'arrêt droit à compression en laiton SharkBite. Le mécanisme push-to-connect de cette vanne d'arrêt vous permet de contrôler et d'arrêter le débit d'eau vers les appareils ou les appareils pour l'entretien et la réparation. Ce raccord de plomberie en laiton est idéal pour travailler dans des espaces restreints et peut être installé dans des conduites humides. Ces vannes d'arrêt droites push-to-connect sont faciles à installer, compatibles avec PEX, CPVC, PE-RT, SDR-9 HDPE et tuyaux en cuivre, et ne nécessitent aucun outil spécial, colle, sertissage ou soudure pour l'installation. Ces soupapes de compression à emboîtement ont un aspect chromé élégant et conviennent aux réparations commerciales ou aux projets de rénovation domiciliaire. Toutes les valves, clips, joints et adaptateurs SharkBite sont fabriqués et testés aux États-Unis. PAR LE FABRICANT Les raccords à emboîtement Shark Bite sont le moyen le plus rapide et le plus simple de joindre le cuivre, le CPVC et le PEX dans n'importe quelle combinaison - humide ou sec - sans soudure, pinces, unions ou colle. Il suffit d'insérer le tuyau et les dents en acier inoxydable mordent et serrent fermement, tandis qu'un joint torique spécialement formulé se comprime pour créer une étanchéité parfaite. Le démontage est tout aussi rapide grâce à l'outil de déconnexion simple. Ainsi, les raccords et les vannes peuvent être facilement changés et réutilisés. Ils peuvent même être tournés après assemblage pour une installation plus facile dans des espaces restreints. Raccords certifiés à 200 PSI et 200-DegreeF (93-DegreeC). Conception certifiée conforme aux normes de produit ANSI/NSF-61 et ASSE 1061 pour une utilisation dans la distribution d'eau potable et d'eau de chauffage hydronique. Approuvé pour être utilisé sous terre et derrière des murs sans panneaux d'accès

Aucune unité disponible
Fabriqué aux États-Unis : toutes les valves, clips, joints et adaptateurs SharkBite sont fabriqués et testés aux États-Unis. Préféré par le professionnel : les outils et raccords SharkBite répondent aux mêmes normes élevées pour les applications de plomberie commerciales et résidentielles, combinant durabilité et facilité d'utilisation ; disposent d'une finition chromée élégante pour une apparence attrayante. Facile à installer : cette vanne d'arrêt innovante dispose d'une entrée push-to-connect de 1/2" et d'une vanne à bille quart de tour en laiton à passage intégral pour un fonctionnement rapide et facile ; aucun outil spécial, sertissage, colle ou soudure nécessaire ; peut être installé dans des lignes humides. Polyvalent : les raccords à butée droite en laiton fonctionnent bien avec les tuyaux PEX, CPVC, PE-RT, SDR-9 HDPE et cuivre. SHARKBITE BRASS PUSH STRAIGHT STOP: Les vannes d'arrêt droites en laiton sont utilisées pour contrôler et couper le débit d'eau vers les appareils ou les appareils pour l'entretien et la réparation; idéal pour travailler dans des espaces restreints ; retirer à l'aide d'un clip de déconnexion ou de pinces de déconnexion.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Certification ‎Nsf
Color Straight
Color ‎Straight
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 133 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Copper
Exterior Finish ‎Copper
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 2.25 x 1.35 x 4.5 inches
Item Dimensions LxWxH ‎2.25 x 1.35 x 4.5 inches
Item model number ‎23337-0000LF
Item Package Quantity ‎1
Item Weight 0.01 Pounds
Item Weight ‎0.01 Pounds
Item Weight ‎0.16 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎23337-0000LF
Pattern ‎Valve
Product Dimensions ‎2.25 x 1.35 x 4.5 inches
Size 1/2 in. x 1/4 in.
Size ‎1/2 in. x 1/4 in.
Style ‎Straight
Voltage ‎120 Volts
Warranty Description ‎For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

3.7

9 Review
5 Star
76
4 Star
15
3 Star
4
2 Star
4
1 Star
1

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un*

Scritto da: T. J. Craig Jr.
What an easy installation...
We put our old refrigerator in the basement and wanted to be able to make extra ice when needed. I had a 1/2" water line right above that was capped and was able to cut the end and pop on the sharkbite fitting. NO problems, but I was careful... A straight cut, not angled... no burrs on the end of the pipe, I smoothed them off... and made sure the fitting had fully bottomed out. Definitely recommend but proper installation is critical.
Scritto da: Phillip Johnson
Don't call a plumber do it yourself
Don't have solder, flux and a mini torch? Not a plumber or trust your skills when soldering? OK, buy this instead. Reem the copper end with a knife so that there's no burr and slap this puppy on and turn your water on. Just make sure you push this on completely, that's all. As easy as it gets and holds city water pressure no problem. Worth the price so if you need this then just buy it already.
Scritto da: Dustin Pearson
Worked perfect for installing new humidifier on my furnace!
Ran the pex line over there, threw this on the end. hooked up a 1/4' stainless braided hose ('ice maker hose') and it worked perfect. I like having the shut off right there by the humidifier cause it makes maintenance just a little faster. SharkBite fittings work excellent and I have yet to see one fail.
Scritto da: Karen Kent
Very easy to turn and the quick connect hardware was included
Very easy to turn and the quick connect hardware was included. It only took a few spanner turns to seal it. While my application didn't call for such lush looks (these are meant for toilets) the chromed brass is pretty. The clip intended to hide the disassembly ring doubles as a removal tool if you turn it upside down ;3 For anyone worried about it, I removed this from the same pipe twice and it still seals just fine. This particular design should be able to be removed and reinserted a handful of times with no problems.
Scritto da: Eizu
Has Anyone Else Had One Of These Leak?
Sharkbite is a premium brand when it comes to push-on fittings, so I was surprised when I pushed this guy onto some PEX tubing and it leaked. I haven't had that problem with the other Sharkbite brand valves and pressure regulator that I bought. I monitored it for a few days, and it seemed to eventually stop leaking after I fiddled with it a few times. I don't know if it is my paranoia, but it still feels damp at that connection when I touch it. Needless to say, I am replacing this fitting with a crimp on PEX tee fitting, and a compression fitting ice maker shutoff valve. The peace of mind of knowing that our plumbing will not leak was worth the extra expense.
Scritto da: Austin Walker
or pex so they are great to have on hand
Local supply house did not carry these. I was adding a whole home humidifier to my house and the HVAC installer wanted to use a saddle valve. I purchase a sharbite T and one of these valves instead. These can be used for copper, pvc, or pex so they are great to have on hand. Have used several sharbite problems over many years and have never had one leak or any problems.
Scritto da: Machaon
Fast and easy solution for inserting a stop valve into a water line.
Sharkbite is so easy and fast to use. This stop valve makes installation easy. Just cut the pipes/tubing and insert. Really good quality and very functional. We've replaced quite a bit of our 50 year old plumbing with Sharkbite. Nice to be able to repair plumbing without welding or having to use a bunch of tools.
Scritto da: Michael
Wonderful
Great
Scritto da: Juan
Easy way to do it
Wrong size ,send back

Produits connexes

hot
Kohler 8304-KSL-NA Vanne Rite-Temp
4.1/5

€ 163.38

Kohler 8304-KSL-NA Vanne Rite-Temp
4.1/5

€ 163.38

hot
Kohler 28304-KS-NA Vanne Rite-Temp
3.6/5

€ 384.26

Kohler 28304-KS-NA Vanne Rite-Temp
3.6/5

€ 384.26

Découvrez notre réseau international

Nous expédions dans 28 pays plus de 200 000 produits. Restez informé, inscrivez-vous à la newsletter.

Array