SharkBite Raccord de chauffe-eau flexible ondulé en acier inoxydable 3/4 po x 3/4 po FIP x 12 po, raccord de plomberie en laiton Push To Connect, tuyau PEX, cuivre, CPVC, PE-RT, HDPE, SS3088FLEX12LF 3/4 po x 3/4 po x 12 po

Name: SharkBite Raccord de chauffe-eau flexible ondulé en acier inoxydable 3/4 po x 3/4 po FIP x 12 po, raccord de plomberie en laiton Push To Connect, tuyau PEX, cuivre, CPVC, PE-RT, HDPE, SS3088FLEX12LF 3/4 po x 3/4 po x 12 po
Brand: SharkBite
SKU: 0697285028678
Price: 36.29 EUR
Availability: InStock

Brand:SharkBite

3.6/5

€
36.29

Caractéristiques : les connecteurs de chauffe-eau SharkBite disposent d'une température de fonctionnement maximale de 200 degrés F et d'une pression de fonctionnement maximale de 200 PSI ; approuvé pour les chauffe-eau à gaz et les chauffe-eau électriques avec conduit de fumée. Préféré par le professionnel : les outils et raccords SharkBite répondent aux mêmes normes élevées pour les applications de plomberie commerciales et résidentielles ; convient aux réparations commerciales ou aux projets de rénovation domiciliaire ; assure une connexion propre et sans fuite et est sans plomb. Facile à installer : ce raccord de chauffe-eau en laiton réduit le besoin de raccords de transition supplémentaires ; permet une installation rapide et facile, sans outils, sertissage, colle ou soudure requis ; retirer à l'aide d'un clip de déconnexion ou de pinces de déconnexion. Polyvalent : ce raccord flexible pour chauffe-eau fonctionne bien avec les tubes PEX, PE-RT, CPVC et les tuyaux en cuivre. Connecteur de chauffe-eau Sharkbite : ce connecteur de chauffe-eau portable offert en acier inoxydable ondulé vous permet de connecter les chauffe-eau avec des tuyaux existants qui ne s'alignent pas rapidement et facilement ; idéal pour travailler dans des espaces restreints.

Aucune unité disponible

EAN: 0697285028678

Catégories Outils et amélioration de la maison, Chargeurs, Tuyaux, raccords de tuyauterie et accessoires, Tubes/Tuyaux,

Brand	SharkBite
Color	Stainless Steel
Exterior Finish	Brass
Item Dimensions LxWxH	30.5 x 3.2 x 3.2 inches
Material	Stainless Steel,Copper,Pex,Cpvc,Brass
Number Of Pieces	1
Size	3/4 in. x 3/4 in. x 12 in.

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Mikey Mike

These are fantastic

I love Shark Bite Connectors. If anyone tells you they leak, it’s because they didn’t properly put them on. If you seat them properly, they never leak. It is easy to not seat them properly if you’re not careful. There is an orange tool that you can buy that you can slip on to the pipe and you can see how far the shark bite needs to go on. Just slip it on and mark the pipe with a Sharpie. The tool also lets you deburr the end of the pipe. It’s only about $10, but you should have one if you use shark bite connectors. Connect them right and you’ll have no problems.

Scritto da: Paul Singh

Made it a breeze to DIY install a new water heater.

Sharkbite fittings are a no-brainer for novice DIYers. They make it super simple to make connections. I used this one to connect a piece of PEX to the water heater. No need for the 2 or 3 90s. I was able to curve this around the water heater to make the ridiculous cold water connection on the Rheem heat pump water heater which features this connection at the front bottom of the unit instead of the top like all other water heaters.

Scritto da: Thomas B. Ford

Exactly What I Needed

I had to move my hot water heater and was replumbing with PEX. These were the perfect solution and since they are flexible it allows you to move things around a little bit without issues. Extremely simple to install, I just put some teflon tape on the threads of the hot water heater and the PEX just slides in. Highly recommended.

Scritto da: dorothy m troup

just the right type for this application, very good quality.

thank you for being so understanding about returning this item. The first set were the incorrect for this application and these flexible hoses were the right item. BUT...when the plumber came to install, replacing a new hot water heater was not the issue, yahhhhh but a leaking condensation line which drained into our overflow pan under the water heater. Thank you for making it so easy to return these fittings.

Scritto da: Kris Paul

Works like a dream!

Install could not have been easier. Used a pipe cutter, reamer, and marked the install depth, went right on and does not leak!

Scritto da: Jimmy Chiu

DIY ez install.

We have the older version of the sharkbite connector. The inner wall of the connector broke down and we started to see little pieces of black substances. This is the improved version. It’s not as flexible as the previous version. It takes a bit of work to get this on and adjust.

Scritto da: K. Barnes

Sharkbite water heater hosers

Pain in the arse to install ???? hopefully I won't have to worry about changing them again. I couldn't get the previous sharkbites off, so I had to cut it off.

Scritto da: REV

It's a SharkBite...

SharkBites aren't cheap, but are super easy and seem to either leak or hold from the start. I ended up having one of these leak, but it was just a matter of popping the old one off, new one on, and everything has been good. I did remove the insert as I was dealing with copper. If you want a "plug and play" option for your water heater, these are great, but you do pay a premium.

Scritto da: Renza

Easy Installation

Very well made, high quality stainless, easy to curve with no kinking and no need for teflon or thread paste. If you haven't used SharkBite or corrugated connectors before, a few tips. Selecting a longer connector than your measurements will allow you to make larger loops which are easier to maneuver than short tight bends. Also don't forget to clean your 3/4" copper pipe on the SharkBite end and put a mark at 1 1/8" in. When you're ready to make the connection I suggest pushing the SharkBite end first all the way to your mark and then make the connection on the tank side. A final note if you've never used SharkBite connectors, the loose white plastic sleeve inside the end connector should be removed (long nose pliers work fine).

Scritto da: Cathy

Glad Amazon has the 3/4x3/4x12 size

I am so glad that Amazon carries the ¾” x ¾” x 12” Corrugated Stainless Steel Hose. I could not find the 12” anywhere else, and I bought two of the hoses to replace my water tank flex hoses. After two weeks of waiting, the original order was lost somewhere. Thanks for Amazon customer service. Sent me a second package, and received it in one week. The hoses are good. There is no leakage after a month of usage. However, my Sharkbite ¾” disconnect tong does not work on these hoses. The hose is too big to fit in the tong.

Scritto da: SnowSquirrel

Easy to install

By using this corrugated connector eliminated additional elbows and other plumbing parts, took the guess work out of the installation process. Also not soldering or crimping of joints, just push-in and screw-on for peace of mind result, no leak no mess!

Scritto da: Amazon Customer

Was ok

Hard to bend and keep its shape, but did the job. Have prime and was supposed to get it in two or three days but was almost a week late.

Scritto da: Cam2019

Good product but needed Teflon tape

One of the 2 I bought was leaking at the threads despite tightening. Plumbers tape took care of the leak but it shouldn't have happened in the first place.