Simpson Cleaning 40224 Tuyau de nettoyeur haute pression Morflex Series 3300 PSI, utilisation d'eau froide, diamètre intérieur, naturel, 25 pieds (1/4")

Brand:SIMPSON

3.8/5

€
69.67

La technologie MorFlex est utilisée pour une grande flexibilité et une résistance à la torsion, une tresse en polyester légère pour une manipulation facile. Le tuyau MorFlex est équipé de raccords filetés avec une conception à double joint torique pour s'adapter aux connexions de 14 mm et 15 mm et comprend un connecteur de tuyau fileté de 14/15 mm. La gaine extérieure en polyuréthane ne marque pas, résiste à l'abrasion et est conçue pour s'adapter à la plupart des nettoyeurs haute pression à gaz avec des raccords filetés standard. Jusqu'à une température maximale de 140°F, ils sont utilisés comme remplacement de tuyau d'origine ou comme extension d'un tuyau existant. Accessoire limité à 90 jours

Montant

Ajouter au panier Acheter maintenant

EAN: 0879399001680

Catégories Patio, Lawn & Garden, Outils électriques extérieurs, Pièces de rechange et accessoires, Pièces détachées et accessoires pour nettoyeurs haute pression, Hoses,

Durabilité : des protecteurs de courbure de 10,2 cm à chaque extrémité du tuyau prolongent la durée de vie de l'accessoire ; la gaine extérieure en polyuréthane se nettoie facilement ; Alimentez votre pistolet de pulvérisation de nettoyeur haute pression, votre pistolet à mousse de lavage de voiture et d'autres accessoires de nettoyeur haute pression. Construction de qualité : la technologie MorFlex donne un tuyau d'eau très flexible et résistant aux plis ; la tresse légère en polyester facilite la manipulation et la gaine extérieure en polyuréthane ne marque pas et résiste à l'abrasion pour une durabilité améliorée. Fonctionne avec la plupart des nettoyeurs haute pression : ce tuyau de nettoyeur haute pression MorFlex est équipé de raccords filetés M22 standard avec un double joint torique pour s'adapter à presque tous les nettoyeurs haute pression à gaz ou électriques, y compris ces modèles Simpson – 60763, 60551, 61016, 61083, 61118. Facile. Connexions : ce tuyau comprend des raccords de tuyau filetés M22 standard de l'industrie et peut être utilisé avec des nettoyeurs haute pression jusqu'à 3300 PSI ; Utilisez-le en remplacement ou, avec l'adaptateur inclus, comme extension de votre tuyau existant. Compatible avec l'eau froide : le tuyau de nettoyeur haute pression de la série MorFlex est conçu pour des températures d'eau allant jusqu'à 140 degrés Fahrenheit ; il est idéal pour tous les besoins résidentiels ou commerciaux pour nettoyer les surfaces, telles que les patios, les terrasses, les revêtements, les véhicules, etc.

Brand	SIMPSON
Color	Natural
Country of Origin	USA
Customer Reviews	4.7 4.7 out of 5 stars 1,014 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	10.25 x 2.75 x 10.25 inches
Item model number	40224
Item Weight	2.2 Pounds
Manufacturer	FAIP North America
Material	Polyester
Maximum Pressure	3300 Pound per Square Inch
Product Dimensions	10.25 x 2.75 x 10.25 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Luigi bambino

Fits perfectly.

this hose arrived in two days and fits perfectly. My power washer is back in business!

Scritto da: Abdelrahman Aly

so far so good

works great and it comes with an adapter that (luckily) realized needed to be removed before it would connect to my pressure washer

Scritto da: Luanna McPherson

has standard quick connect

item is well made and worth the money spent

Scritto da: Jeff Miller

Good factory replacement substitute

I saved quite a bit of $ by purchasing this one rather than the manufacturer’s hose. Works just the same. Thank you

Scritto da: Alexcin43

Manguera

Ligeramente buena

Scritto da: AKO California

Handling both the 22-14 mm size and 22-15 mm size fittings saved me some money

I'm using this to connect to a spray gun to feed a sewer jetter hose and nozzle, but to a pressure washer that has the uncommon (in the US) 22mm diameter outside and 15mm inside diameter fitting. That size seems to be more common in European pressure washers or certain imported brands since that's what came up when I tried to search for adapters. Most pressure washers in the US seem to have a 22 mm outside and 14 mm inside fitting. The hose/gun combo that came with my inexpensive pressure washer was all custom fittings, so I could not use it to connect to the sewer jetter hose. This hose saved me from having to buy an adapter since it'll handle either size due to the two sizes of O rings on each end. I could then buy an inexpensive spray gun with a 22-14mm connector. So I saved by not having to buy an adapter. Those adapters are available, but I could only find them on specialty online stores or Ebay. The other choice was buying hoses and a spray gun made for those other brands, which were all much more expensive than the more common sized ones. Since this hose comes with an double male adapter with 22-14mm on one side and 22-15mm on the other, I can actually use it to extend the length of the hose that came with my pressure washer. I used it for several hours while clearing out a drain on two days, and it held up just fine. Then I just connected the other hose and did a little pressure washing on the outside of the house since I had it out. My pressure washer is only rated at 1750 psi, so nowhere near the rating of this hose. I was not using it on a rough surface, but the hose seems slippery enough that it won't wear out on the outside too quickly. It definitely was a good addition since the extended hose is a much easier length to use for washing my car, and I can now buy standard accessories if I ever need a special wand or new spray gun.

Scritto da: NOLA guy

Perfect fit

Bought one after OEM had a blowout. After the first buy and my pressure washer didn't have the airgaps that was experiencing with the OEM had decided to go from 25 feet of pressure hose to fifty feet. Wow only have to move the entire system twice to go the entire house, upstairs and downstairs. Highly satisfied!!

Scritto da: Wolfgang

Simpson Pressure Washer Hose

Have been using this Simpson Pressure Washer Hose fro more than one year and it is holding up well.

Scritto da: william m.

durability

one i bought this pressure washer hose because of money.i received a 2000 psi electric pow. washer for kree and not want to spend a lot of on getting it to work and worked it i did ther was no blow outs or problems. the hose is rated for 3200psi on a 2000psi pump and i reckon there will be no problems with this combination.thk you Bill

Scritto da: Daniel Crispin

Good value

Adding this to extend the lenght of the pressure washer hose that comes with basic models is great. Resolves many issues and prevents hose kinking quite a bit. The hose itself is low quality so it's not very flexible and will be very stiff when it's cold outside. But it still works well and improves the enjoyment of using the pressure washer quite a bit for a very low cost.

Scritto da: Richard M.

pressure washer hose perfect

After burning a hole in my original hose through carelessness, I went online to the company that manufactured the product. This was very unsatisfactory as their website and method of dealing with people is primitive. Finally, I said, forget it. Went to Amazon, bang. There was exactly what I needed. A reasonable price and works perfectly. Most importantly, the picture showed the type of hose it was with the fittings clearly visible.

Scritto da: Jamie

Perfect hose for the money!

Decided to nurf the simonize gun and line for this one with a universal gun to support my foam cannon. This works great!

Scritto da: James Donnelly

Did the job

Fit was good no leaks ,not to stiff good value for your money