Slide-Co N 163138 Poignée de porte coulissante ronde (2pk) – Acier estampé avec finition laiton – Convient aux trous de doigt de porte de placard Bi-Pass de 1-3/4" de diamètre – Design universel – Facile à installer, matériel inclus

Brand:Slide-Co

3.6/5

€
26.74

DESCRIPTION DU PRODUIT Lorsque le doigt tire sur une porte de placard manquant ou endommagé, non seulement il est difficile à ouvrir, mais il est également disgracieux. Avec le Round Finger Pull de Prime-Line, vous pouvez en installer un tout nouveau rapidement et facilement ! La poignée de porte est fabriquée en acier estampé durable avec une finition en laiton. Utilisée par de nombreux fabricants de portes de placard sur les systèmes de porte à double passage, la tirette correspondra à la quincaillerie existante sur les placards de votre maison. La poignée de garde-robe en acier estampé est compatible avec les portes de garde-robe à dérivation de ¾" à 1-3/4" d'épaisseur. L'installation est rapide et facile avec tout le matériel inclus. Les poignées de porte s'adaptent à une mortaise de 1-3/4 po dans la porte du placard et sont maintenues en place par deux petits clous. Lorsqu'il est encastré, il mesure 2 pouces de diamètre. Chaque paquet comprend deux poignées de porte coulissante et quatre clous. DU FABRICANT Cette poignée de porte de garde-robe est fabriquée en acier et est finie en laiton. Il présente un diamètre de 1 3/4 po et se met facilement en place avec 2 clous inclus. Cette poignée de style est utilisée par de nombreux fabricants de portes de garde-robe.

Montant

Ajouter au panier Acheter maintenant

EAN: 0078874631385

Catégories Outils et amélioration de la maison, Quincaillerie, Immobilier de porte et serrures, Pocket & Bifold Door Hardware,

Pour toutes les informations dimensionnelles, veuillez vous référer au dessin au trait et comparer à vos besoins avant d'acheter. POUR PORTES DE GARDE-ROBE BI-PASS - La poignée de placard en acier estampé est compatible avec les portes de garde-robe bi-pass de ¾" à 1-3/4" d'épaisseur. INSTALLATION FACILE - L'installation est rapide et facile avec tout le matériel inclus. Les poignées de porte s'adaptent à une mortaise de 1-3/4 po dans la porte du placard. La tirette est maintenue en place par deux petits clous. Lorsqu'il est encastré, il mesure 2 pouces de diamètre. CONCEPTION UNIVERSELLE - Utilisée par de nombreux fabricants de portes de placard sur les systèmes de porte de contournement, la tirette correspondra au matériel existant sur les placards de votre maison. COMPREND - Chaque paquet comprend deux poignées de porte coulissante et quatre clous. Chaque tirette est maintenue en place par deux clous. Remplacez la poignée de porte de placard – Remplacez facilement une poignée de porte de placard endommagée ou manquante avec la poignée ronde de Prime-Line. La poignée est fabriquée en acier estampé avec une finition en laiton.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Slide-Co
Brand	‎Slide-Co
Color	Brass
Color	‎Brass
Customer Reviews	4.5 4.5 out of 5 stars 593 ratings 4.5 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Finish	‎Brass
Finish Type	‎Brass
Handle Material	‎Alloy Steel, Brass
Handle Type	‎Pull Handle
Is Discontinued By Manufacturer	‎No
Item model number	‎163138
Item Package Quantity	‎1
Item Weight	‎0.8 ounces
Manufacturer	‎Slide-Co
Material	Steel
Material	‎Steel
Metal Type	‎Brass
Number of Items	‎1
Part Number	‎163138
Product Dimensions	0.31"L x 1.75"W
Product Dimensions	‎0.31"L x 1.75"W
Product Dimensions	‎1.75 x 1.75 x 1.75 inches
Shape	‎Round
Size	‎1-3/4 in.
Warranty Description	‎Goods are warranted against manufacturing defects for 1 year. In no case is ime-Line responsible for user related damage or damage incurred during installation. Warranty is void if oducts are subjected to abnormal conditions, misapplication or abuse.

5 Star

4 Star

3 Star

2 Star

1 Star

Donnez votre avis

Votre courriel ne sera pas publié. Tous les champs obligatoires sont marqués d'un^*

Votre note

Scritto da: Maria Keith

Perfect fit

Fits the opening perfectly, nice update from ugly brass ones

Scritto da: HELP ME, HELP YOU!

Perfect Size & Shape

It's not that easy to find something like so I must give this a five star. It even WORKS with magnets so that's just the icing on the cake! IF you're the creative type you'd know what I mean.

Scritto da: WW

Hard to find size in stores

I took on the unenviable task of refinishing, recycling some old oak wood closet doors for our house. I've been doing this type of work for around 15 years. I went to the local home improvement stores and found these round finger pulls to fit in the existing spaces (filled with rotted out plastic pulls). It was a mistake that's very uncommon for me. I didn't even realize these come in different sizes. The ones I bought were over 2" and wouldn't even try to fit in the existing spaces. Came here to Amazon and there they are, the 1 3/4" satin nickel pulls. Price was quite a bit higher than buying the standard (in 2016) size, but I wanted to keep the doors as authentic as possible. Turned out to be a great buy. The spaces measured 1 3/4", but with existing rotted plastic, I had to pry out the old pieces and even then, these 1 3/4" pulls were a very snug fit. If I could give you any installation advice it would be to try and get one piece into the space then start pushing. They popped in well and are very snug. I'm guessing someone 50 years now will be cursing me as they try to resurface, recycle the doors. We bought a total of 10 and all 10 worked very well, no inconsistencies between them.

Scritto da: GWM

Nice Door Pull, but product information is incorrect.

This is a nice quality steel door pull with a classy antique bronze finish. My wardrobe closet door now looks much nicer as I replaced two decades-old, cheap plastic door pulls with these and the difference in the look of the door is night and day. They really class up the look of my wardrobe closet door! However, I must point out that the product information in both the Amazon listing and the actual product packaging is incorrect. The product information states "Includes 2 Pull Handles and 4 Nails" and "Sets in place with 2 included nails". This is incorrect as no nails are included in the package nor are there nail holes in the door pulls to insert the nails through. This did not end up being an issue with me as the door pulls friction-fit tightly into the closet door holes and therefore nails were not needed. However, this may not be the case for others who purchase these so the product information should be corrected immediately.

Scritto da: Mrs.C.

Nice replacement

Looks way better than the tan plastic ones that were in the doors originally. Didn't have the strength to push them in so I had to use a wood block and hammer to pound them in (I don't own a rubber mallet). They should stay put and and function as intended.

Scritto da: Casey B

Easy to install - just pop them in place and you’re done!

Looks great and very easy to install. This was a simple repair/update that cost less than $6 and took about 5 minutes to do. The sliding closet doors in our guest room had cheap plastic door pulls that were covered in paint. I pried out the old door pulls with a screwdriver and removed the glue underneath. Then I just popped in the new door pulls. They don’t have nails to secure them; There are a few small raised indents around the edge to hold the pulls in place. They are fairly snug, but I’m going to add a little glue underneath to make sure they stay in place. I was so happy with these that I immediately ordered another set for my daughter’s closet.

Scritto da: TodPkg

I did my best to center them in the hole

These Finger Pulls were used to update sliding closet doors in a bathroom. They were the same size as the Finger Pulls that they replaced. I thought that I was going to have a problem installing them because they seemed quite tight. I did my best to center them in the hole, but they would barely seat down into it - maybe only 1/16". Another reviewer suggested using a dish towel and a rubber mallet. That did the trick, except 6 or 7 fibers from the dish towel became trapped under the rim which had been "sealed" against the closet door - I had to carefully cut them away so that they didn't show. For the last two handles to be installed I switched to a dry DISH CLOTH (not dish towel). No fibers were trapped under the rim this time, and the finish of the Finger Pull was not marred either.

Scritto da: Quintster

Nice choice for sure!

Perfect size and just the right color for the sliding doors we installed in our closets. Could not be more pleased with the quality either. You will need a hole saw bit for your drill to make the holes obviously so make sure you order one of those, too! We put them on both the inside and outside of the door. I was just going to do exterior since they are closet doors and not like a bathroom pocket door. My wife wanted both sides done and she was right, of course. Easy grip to close from inside.

Scritto da: Ken L.

Great product

This is a great product. Good quality and it was shipped and received very quickly.

Scritto da: T. Odishaw

Happy

Used for sliding closet doors. installed well and seem to be doing the job. I would order them again. No issues with product or delivery time.

Scritto da: Bonjour

Poignée portes coulissante

Ces poignées s’agence bien